Outline ·
[ Standard ] ·
Linear+
SAMSUNG GALAXY S II Official thread V16, Be a SMART user - Pls read Page 1 first
|
antt00
|
Oct 14 2011, 10:58 AM
|
|
QUOTE(Joey Christensen @ Oct 14 2011, 10:49 AM) Could it be the Full HD videos that I shoved it in my SGS2? LOLZ! Watching video while the move on a 4.3" screen is really...AWESOME! Keep all movies, photo, mp3 on external SD. 16 g internal SD sure not enough since your sharing with the rom and other stuff. Thnks for the info on Heavy Gunner 3D. Downloading now. This post has been edited by antt00: Oct 14 2011, 10:58 AM
|
|
|
|
|
|
antt00
|
Oct 14 2011, 10:59 AM
|
|
QUOTE(prescott2006 @ Oct 14 2011, 10:56 AM) Thanks for your reply. But I don't see any information about baseband there. Baseband is your modem which controls your phone and wireless. Added on October 14, 2011, 11:00 amQUOTE(ashwin1234 @ Oct 14 2011, 10:58 AM) I notice in your sig you are using Siyah 1.8. Once I flash, it applies some UV that causes some phones to crash right? So I can overcome it by using SetCPU? I understand that I cannot use Tegrak to control the CPU, But Can I still Control the GPU? I am still looking for a way to control my GPU speeds but seems like cannot because only Tegrak can Try running it without UV first. Yes you cannot use tegrak. Use setcpu. The GPU scripts are in the first post. The only way to control gpu on siyah is through scripts. There is no app. This post has been edited by antt00: Oct 14 2011, 11:00 AM
|
|
|
|
|
|
antt00
|
Oct 14 2011, 11:01 AM
|
|
QUOTE(prescott2006 @ Oct 14 2011, 10:59 AM) So normally how you transfer data such as song and video to your phone? The traditional way is to put the memory card into card reader. But since it is not hot-swappable, it will be a nuisance. If you say using USB cable directly plug into PC, then when file is being transferred, is the phone operate-able? Plug in using USB to transfer files. Phone is still operatable. Except for files/apps you put in sd. Added on October 14, 2011, 11:03 amQUOTE(prescott2006 @ Oct 14 2011, 11:01 AM) But I see some people is talking about flashing the baseband. What is it for? To try different modem lo.  Some got better signal with this one, or better data stability with that one or better batterry life with another one..... This post has been edited by antt00: Oct 14 2011, 11:03 AM
|
|
|
|
|
|
antt00
|
Oct 14 2011, 11:11 AM
|
|
QUOTE(ashwin1234 @ Oct 14 2011, 11:08 AM) All right, thanks, going to flash it through Odin. SO just flash and don't bother changing any voltage and clock settings just to see how it runs? Yeah don't bother with UV first. Try out the different governors and clock settings. If you want to try UV, don't set it at boot until your sure it will run fine on your device.
|
|
|
|
|
|
antt00
|
Oct 14 2011, 12:03 PM
|
|
QUOTE(destEX @ Oct 14 2011, 11:40 AM) just curious, flashing thru cwm will increase counter? btw counter 70 and still increasing what type of case you want, normal, flip up, flip down, diary have a loot at Zenus cases, and casemate dont go for SGP neo hybrid tho Cwm does not increase counter. My counter only 4
|
|
|
|
|
|
antt00
|
Oct 14 2011, 12:18 PM
|
|
QUOTE(ashwin1234 @ Oct 14 2011, 12:04 PM) Crap la, flash through CWM and still got love triangle when starting up... You need to flash back stock kernel zimage to remove triangle. Then reflash siyah kernel. Use cwm manager or similar app that allow you to flash zimage to do this.
|
|
|
|
|
|
antt00
|
Oct 14 2011, 02:33 PM
|
|
QUOTE(Luwk @ Oct 14 2011, 02:31 PM) Non G version came out first. G version just came out a few weeks ago.
|
|
|
|
|
|
antt00
|
Oct 14 2011, 02:37 PM
|
|
QUOTE(blackrobin @ Oct 14 2011, 01:32 PM) I duno of im allowed to ask this here. wher can i gt ginerbread keyboard with larger keys? Tried searching in xda.nt realy fruitful..i dunno how extract frm checkrom lol Look in /system/apps. Samsung keyboard is AxT9IME.apk, swype is swype.apk and i think gingerbread keyboard like those on cm7 is LatinIME.apk.
|
|
|
|
|
|
antt00
|
Oct 14 2011, 02:39 PM
|
|
QUOTE(jutamind @ Oct 14 2011, 02:29 PM) the swype version that comes bundled with sgs2 is licensed. if we update the swype version with the beta version, will the license be valid or the beta will expire? You will lose your license copy if you install beta swype. Not really a big issue if you use custom rom as you can just put back the apk.  Edit: I think you will have to uninstall license copy before you can install the new beta if i remember correctly. This post has been edited by antt00: Oct 14 2011, 02:40 PM
|
|
|
|
|
|
antt00
|
Oct 14 2011, 02:56 PM
|
|
QUOTE(rock4f3lla @ Oct 14 2011, 02:53 PM) i need help guys. i tried to install cm7. then the phone got stuck at the boot screen. and i forgot to back up. what do i do now? i tried to flash cm7 two times. din work. when i try to flash again i get status 7 error. p/s i dont have external physical sd card. i used the internal storage First of all, please tell me your model is i9100 and not i9100g. Easy way out, go download ori firmware and flash using odin in download mode.
|
|
|
|
|
|
antt00
|
Oct 14 2011, 03:04 PM
|
|
QUOTE(rock4f3lla @ Oct 14 2011, 03:00 PM) non g. i9100. ok. but when i try to flash custom kernel using odin nothing happen. i used heimdall to flash the kernel in the end. downloading now stock firmware. Always do nandroid backup before flashing something. It is a good practice and can save your ass alot of times. I have at least 3 - 4 nandroid backup in my internal sd card in case something goes wrong as i frequently flash stuff.
|
|
|
|
|
|
antt00
|
Oct 14 2011, 03:21 PM
|
|
QUOTE(hitz @ Oct 14 2011, 03:19 PM) Me also same... unable to install cm7... It will stuck on the Boot screen only... So i reflash it to Batista v2.2...  CM7 rom have to flash twice right. Did you guys do that?
|
|
|
|
|
|
antt00
|
Oct 14 2011, 03:54 PM
|
|
QUOTE(rock4f3lla @ Oct 14 2011, 03:45 PM) after it hanged i panicked and straight away reflashed the kernel. which din work. tried reflashing to stock kernel. din work either. well. the flash twice thing was not on the wiki page. so i din know bout that, not until after a few liters of manly tears later.  Stock kernel of cos won't work because it is not compatible with CM7. Read the thread on XDA as it is more specific for our device and will be more important than the one in wiki.
|
|
|
|
|
|
antt00
|
Oct 14 2011, 04:01 PM
|
|
QUOTE(rock4f3lla @ Oct 14 2011, 03:59 PM) i tried like 4 different type of kernels. 3 custom, 1 stock. well. i cant re install cm7, i keep getting installation aborted error. Only 2 kernels are compatible with CM7. The original one that comes with the rom and siyah 2.0 betas. All other kernel are not compatible including stock kernel. Edit: There is one more that is compatible. It is like the ori cm7 kernel but added bln. Forgot the name liau. Spark i think. This post has been edited by antt00: Oct 14 2011, 04:06 PM
|
|
|
|
|
|
antt00
|
Oct 14 2011, 04:08 PM
|
|
QUOTE(devil94 @ Oct 14 2011, 04:05 PM) Anyone using KI8 roms here ? download DK5.5  Not flashing KI8 until Jkay support it. Please go ahead and try and report if got any diff with KI3.
|
|
|
|
|
|
antt00
|
Oct 14 2011, 04:56 PM
|
|
QUOTE(rock4f3lla @ Oct 14 2011, 04:37 PM) tried all 3, still installation aborted. is it because im on 2.3.3? What are you trying to do now exactly? Added on October 14, 2011, 4:57 pmQUOTE(cjxs @ Oct 14 2011, 04:52 PM) Hey Guys.. go to soya cincau and watch the SIRI lost in translation. Damn funny. LOL. Here is the link http://www.soyacincau.com/2011/10/14/siri-...in-translation/This post has been edited by antt00: Oct 14 2011, 04:57 PM
|
|
|
|
|
|
antt00
|
Oct 15 2011, 10:45 AM
|
|
Siyah 2.0 Beta 7 make my device hang twice. Updated flash. Are you guys using voodoo screen app? There is also an update.
|
|
|
|
|
|
antt00
|
Oct 15 2011, 11:00 AM
|
|
QUOTE(ashwin1234 @ Oct 15 2011, 10:51 AM) You want to remove all choppiness? use Tegrak, Lock the GPU speed, overclock to 1.5GHz or 1.4GHz and lock the CPU speed too. Will become so smooth you won't believe your eyes. Actually siyah kernel also can lock gpu speed at 267 mhz, just that need to use script there is no app for it. Example now my gpu is underclock and UV cos i seldom gaming. Added on October 15, 2011, 11:01 amQUOTE(destEX @ Oct 15 2011, 11:00 AM) oh? they say change to smartass v2, i flash nao see will hang hang not then use the siyah's gpu control interface la, change both state's clock rate to 267 or to 400, then sure smooth I think its the i/o scheduler cos he say he tweak VR and SIO. I got hang with VR. Now trying SIO. so far so good. This post has been edited by antt00: Oct 15 2011, 11:01 AM
|
|
|
|
|
|
antt00
|
Oct 15 2011, 11:06 AM
|
|
QUOTE(soulseeker6187 @ Oct 15 2011, 11:02 AM) I also have this problem,but when I want to play games, how i solve this,I change governer to performance on setcpu and the games will play smoothly. Anyone have a better method? I think thats the best way along with locking gpu and cpu speed. Use app such as setcpu and change back after gaming. Also do not set your lower cpu speed too low. Maybe screen on 500 - 1200 mhz will giv you better experience than 200 - 1200 mhz. Added on October 15, 2011, 11:07 amQUOTE(Shizuru @ Oct 15 2011, 11:06 AM) Speaktoit is seriously funny. when I input my name, she thought its facebook. keep calling me facebook but other then a few misinterpretation it was quite good  able to open contacts, message and everything. really nice but I uninstall since I don't think I'll be using it  At least it didn't call Linda. This post has been edited by antt00: Oct 15 2011, 11:07 AM
|
|
|
|
|
|
antt00
|
Oct 15 2011, 11:14 AM
|
|
QUOTE(Luwk @ Oct 15 2011, 10:57 AM) Hey guys may i know hot to actually differentiate a G and Non-G version ? Model number on box or wherever? Is it hard to find a Non-G version SGS II now? can somebody provide a link for me ? Thanks  Look for the model number on the box if it is properly sealed with the blue sticker. If box is already open better turn on the device and check in setting > about phone > model number
|
|
|
|
|