no, both of ur ram running@1333mhz with the same timing.

---

Added on November 13, 2011, 1:32 pmscrew MW3, its Skyrim time.

being a console port makes the graphic look quite bland compare to BF3 or The Witcher 2 but adequate enough for me to enjoy.

*brb in 80 hours*

This post has been edited by Acid_RuleZz: Nov 13 2011, 01:32 PM

The table only show what timing the ram will run @ that frequency i think.
I don't know why your Micron have table for 781mhz, is it really 1333mhz ram?

Saw u have AD700 in ur siggy, did u try it with DV6? Does it suffer from "explosive bassy behavior" too?

I can't find fax machine so i took picture of it and email to carepackreg@siriuscom.com.my

Is that after xbootmgr optimization?

it will get slower for once if u updated windows/driver. do you have *.etl file in C:\Users\<your profile>\

hmm.. try find in C:\Windows\
there will be several file named bootPrep_BASE+CSWITCH_*.etl, boot_BASE+CSWITCH_*.etl which u can open and analyze it.

yes.. u can delete them... ate around 700mb i think.


lol.. try do it again. UAC turned off already?

either with UAC turn off or open CMD with Admin powah. i did it with UAC turned off.

try check again in C:\Users\<your profile>\ if have because with UAC off it should save it there.

How effed up? Costume Quest is flash based?

Try disable hardware acceleration.

Oh shi.. almost forgot about u. Yes that is the files. Need you to run this in CMD 1 line at a time.

After that upload both 01_summary_start.xml and 02_summary_end.xml here. You can find it in System32 folder.

Try to copy bootPrep_BASE+CSWITCH_1.etl and boot_BASE+CSWITCH_1.etl to different partition or C:\.

---

Added on November 14, 2011, 12:59 am
Can u open regedit and check the content of these registry keys?

1. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Dfrg\BootOptimizeFunction
2. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Prefetcher

This post has been edited by Acid_RuleZz: Nov 14 2011, 12:59 AM

Sorry, that regedit thingy was not meant for you.

Where did u moved it? Did u still use "cd C:\Windows\System32" or u use "cd <insert new path for both file>"?

Don't know what else to do.

Maybe you could open the file and check which process took long time to start.

The graph is pretty long... i forgot how it look like. Usually i just check the xml. Can u disable UAC, reboot and run the xperf command again?

I don't really know what is the problem too.. something about group policy kinda messed up in your system or security level too tight.

If u have a pendrive, try to copy the files into the pendrive and run xperf command again. I found a guy who is having the same problem with exporting to xml was able to do it that way.

That was meant for kayrol..

Sorry i don't use SimplePass...


All high with MSAA=Off, Reflections=On, and FXAA=High.


Looks like HP Support Assistant taking to much time to start. Try disable from startup.

paiseh typo... i mean't HP Wireless Assistant.

---

Added on November 14, 2011, 8:36 pmNo problem with your HDD.

This post has been edited by Acid_RuleZz: Nov 14 2011, 08:36 PM

You shouldn't because MSE is pretty adequate and light weight.


Where does it slows? Gaming? Normal usage? Boot up?


Me too.