Outline ·
[ Standard ] ·
Linear+
SAMSUNG GALAXY S II Official thread V15, Be a SMART user - Pls read Page 1 first
|
antt00
|
Oct 6 2011, 07:37 AM
|
|
QUOTE(says @ Oct 6 2011, 12:19 AM) My phone is i9100 version. cannot change language to chinese? If you just want chinese input, update your rom or just use pinyin keyboard from market like so many have suggested. If you want your whole phone to be in chinese, meaning all sytem text, bla bla bla etc. go flash hong kong rom. Added on October 6, 2011, 7:40 amQUOTE(Slekerz @ Oct 6 2011, 02:40 AM) guys anyone of you have download and flash new rom Androidmeda-HyperDroid, i have download and will flash it after this, now i use leomar75 rom. I have downloaded it but not yet installed. I browse through the zip and could not find much diff with my current rom. Well it is just another KI3 just that its branded by pongster. SGS2 KI3 rom not much variety, all the same except for themes. sigh This post has been edited by antt00: Oct 6 2011, 07:40 AM
|
|
|
|
|
|
antt00
|
Oct 6 2011, 02:34 PM
|
|
QUOTE(hitz @ Oct 6 2011, 02:06 PM) Help needed.... I set under volt on my sgs2 using set cpu... Now the phone freeze and reboot itself... Power off and on back it will freeze itself also once the set cpu run... Anyway to stop the application from running during startup?  There is suppose to be a safe mode for setcpu that you can flash through CWM but i cannot find it. Alternatively, flash a kernel that does not allow UV such as CF or Speedmod then you can start normally. Edit: Found the safe mode zip
setcpu_safemode_toggle.zip ( 127.65k )
Number of downloads: 0This post has been edited by antt00: Oct 6 2011, 02:41 PM
|
|
|
|
|
|
antt00
|
Oct 6 2011, 02:41 PM
|
|
QUOTE(hitz @ Oct 6 2011, 02:39 PM) Aiya... sadly I didn't bring my usb cable to office... Is there anyway that we can boot it into save mode or something like that... Else need to wait till go home only and flash back to ori kernel only can start right? Boot into CWM and flash the safe mode above. But i think u need USB cable to move that file into your device. This post has been edited by antt00: Oct 6 2011, 02:42 PM
|
|
|
|
|
|
antt00
|
Oct 6 2011, 03:08 PM
|
|
QUOTE(hitz @ Oct 6 2011, 03:04 PM) Problem solved liao... Boot into safe mode and remove those under volt setting...  I thought u set through setcpu. Where you find those settings?
|
|
|
|
|
|
antt00
|
Oct 6 2011, 03:29 PM
|
|
QUOTE(hitz @ Oct 6 2011, 03:25 PM) SetCpu also can adjust the voltage wan mar for all the freq...  I know lar.  I thought u cannot get it to boot so was wondering how you change the setting lo.
|
|
|
|
|
|
antt00
|
Oct 6 2011, 03:49 PM
|
|
QUOTE(Bugeca @ Oct 6 2011, 03:45 PM) He boot the phone in the Safe Mode, this what I can understand laa from the last post. How do you boot the phone into safe mode
|
|
|
|
|
|
antt00
|
Oct 6 2011, 04:00 PM
|
|
QUOTE(kazama82 @ Oct 6 2011, 03:58 PM) went to maxis website..they took out sgs2 from their page..maybe prime will be on maxis soon?..or maybe becoz of very hard to get stock, they decide to stop showing in their webpage? They remove it quite some time ago. Dunno why though. Added on October 6, 2011, 4:01 pmQUOTE(Bugeca @ Oct 6 2011, 03:58 PM) Press power and menu, then release the power key but keep pressing the menu button. The word "Safe Mode" will be displayed on lower left if I'm not mistaken. Thanks. Never heard of this safe mode before. Let me try it out. Edit: Maybe not unless i need it. This post has been edited by antt00: Oct 6 2011, 04:09 PM
|
|
|
|
|
|
antt00
|
Oct 6 2011, 04:41 PM
|
|
QUOTE(Joey Christensen @ Oct 6 2011, 04:35 PM) Do you guys think the new voice-controlled Siri personal assistant on the iPhone4s is almost the same as the one featured on our SGS2 whereby we just say "Hi, Galaxy"? I think it is similar but i also think all these voice control are gimmicks to attract people. Most of it are useless as they are not accurate. In the end use your finger alot faster and less frustrating.
|
|
|
|
|
|
antt00
|
Oct 6 2011, 05:10 PM
|
|
QUOTE(ventrilocks @ Oct 6 2011, 04:55 PM) i didnt even use voltage setting at all..can last long for medium usage..2 days are enuf.. Same for me. I see no diff using UV and have stop using it.
|
|
|
|
|
|
antt00
|
Oct 6 2011, 05:34 PM
|
|
QUOTE(ksh9394 @ Oct 6 2011, 05:32 PM) Just saw it. Oh god another HD2 chef has joined SGS2. Not planning to change rom though at the moment.
|
|
|
|
|
|
antt00
|
Oct 7 2011, 07:59 AM
|
|
QUOTE(TheLaptopDudeGuy @ Oct 7 2011, 07:56 AM) Hmm... last night batt drain frm 79% to 70%(abt 10 hrs),there were 3 wakelocks and 2 of them were super long. I couldnt tell what apps were draining,as only activitymanager-launch and alarmmanager as wakelocks. at the processes page,only suspend and events/0 any idea what they are? They're pissing me off  How long were the suspend and events0 time? Edit: You posted the pictures. Suspend & event 0 is i think the cause. Your device is unable to go to sleep. Some app is keeping your device from sleeping Read here http://forum.xda-developers.com/showthread.php?t=1290020I still got no time to finish reading that thread. This post has been edited by antt00: Oct 7 2011, 08:01 AM
|
|
|
|
|
|
antt00
|
Oct 7 2011, 08:10 AM
|
|
QUOTE(Snowguy2068 @ Oct 7 2011, 08:01 AM) opinion needed. sgs2 or wait for nexus prime. the only downside about buy sgs2 not is worried to get the 9100g one if i wait the specs for the prime looks kinda down :| gahh! Prime of cos slightly better spec and ICS. But remember it will be more expensive also. So depends on your pocket also. If you want to buy SGS2, just check la if it is 9100g or normal 9100 before you purchase. If you like flashing rom, maybe ICS will also come to SGS2. Official ICS for SGS2 i think can only dream at the moment.
|
|
|
|
|
|
antt00
|
Oct 7 2011, 08:30 AM
|
|
QUOTE(sOuLx @ Oct 7 2011, 08:15 AM) yup. i think that's call a boot loop. always stuck there. eh, different eh vol up and down. i try pressing vol down +home+ power only. later i try with vol up. Volume up is for Recovery, volume down is for download. One guy in xda even say, he flash back to stock kernel after failing to get into download mode. Just plug in and flash. Dunno true or not. If cannot enter any mode or flash back to original kernel, then i think your only option is samsung service center. Edit: I think that guy was hahaboy. Maybe you can check with him. This post has been edited by antt00: Oct 7 2011, 09:26 AM
|
|
|
|
|
|
antt00
|
Oct 7 2011, 08:35 AM
|
|
QUOTE(nomoredfox @ Oct 7 2011, 08:18 AM) Do you mind sharing some pictures when in the phone..... I saw shop selling RM139 for the 2000mAh batt... some say rm250...  Just make sure the 2000 is really 2000, not some batt with 1600 but advertise as 2000. 2000 sure will be slightly thicker one and come with different cover.
|
|
|
|
|
|
antt00
|
Oct 7 2011, 09:17 AM
|
|
QUOTE(nomoredfox @ Oct 7 2011, 08:44 AM) wow....i cant believe there is 'fake' batt The shop was in Gurney Plaza with huge Samsung logo.... Mayb png s2 users might check it out to confirm again.... Is it ori samsung brand or some other brand? What brand is the batt?
|
|
|
|
|
|
antt00
|
Oct 7 2011, 09:19 AM
|
|
QUOTE(TheLaptopDudeGuy @ Oct 7 2011, 08:33 AM) I don't have this issue. It seems only some people have it so it lead me to think it could be related to some app or setting. Added on October 7, 2011, 9:19 amQUOTE(Dark_Angel85 @ Oct 7 2011, 09:18 AM) Unman... siyah 1.7.8 also shows freezes and force closes for me... reverting back to ninpo... Are you UVing or using 100mhz? What governor your using? This post has been edited by antt00: Oct 7 2011, 09:20 AM
|
|
|
|
|
|
antt00
|
Oct 7 2011, 09:53 AM
|
|
QUOTE(Dark_Angel85 @ Oct 7 2011, 09:39 AM) I'm undervolting but barely. I'm trying to undervolt with ninpo now and see if the results are the same. But as I can remember, ninpo was just fine before. If it shows the same, I'll revert to default voltages. Not using 100MHz. I don't really see any real difference between the governors.I'm sure there is a difference slightly but not noticeable to me. Added on October 7, 2011, 9:41 amI didn't get forced closes immediately after flashing it. After 2-3 days then it shows signs of freezing... I undervolt too... that could be another issue too but I don't go way low... just a Tad lower than the default voltages QUOTE(Fallenangelz @ Oct 7 2011, 09:47 AM) been using siyah 1.7.8 for around one week d, doesnt notice any obvious freeze/hang/fc. only faced hang while i let the phone standby for around 1 min when running asphalt (my setcpu offscreen profile is 200mhz-500mhz  ) Same here i have been using siyah for as long as it came out but no freezes unless i use 100 mhz. BTW what rom are you using? I think its rom compatibility issue. This post has been edited by antt00: Oct 7 2011, 09:54 AM
|
|
|
|
|
|
antt00
|
Oct 7 2011, 10:02 AM
|
|
QUOTE(Gilthoniel @ Oct 7 2011, 10:00 AM) yes i understand that. but there is still some data left on the phone portion, so if i back up with TiBackup and later restore, will this portion of data link well with the data stored on the SD card storage to run the app with no glitch? or do i need to move everything back to phone first, backup, then after wiping, restore, and move back to SD? The link will still be there. No need to move it. I have done it alot of times, dictionaries and games have links to some files in SD card and it always work after TB restore.
|
|
|
|
|
|
antt00
|
Oct 7 2011, 10:04 AM
|
|
QUOTE(destEX @ Oct 7 2011, 10:03 AM) For those using the checkrom v5 is your lockscreen working for you? mine can use but the shortcuts wont work, all leads to unlock, even when i set the theme deluxe to camera, still unlock, reflash(ouch) reset STILL unlock, really @@ ad uninstall and reinstall jkay theme app.
|
|
|
|
|
|
antt00
|
Oct 7 2011, 10:32 AM
|
|
QUOTE(destEX @ Oct 7 2011, 10:27 AM) well i dont know what happened, this time i reflash again and it works, maybe the previous gold theme was corrupted @@. antt00 if you're using your gold theme can post a bit screenshots? why my theme like different from those screenshots/video in checkrom website @@ No I am on touch rom using jkay blue htc theme with some modified icons.
|
|
|
|
|