owh.mean not too much price gap here coz been quote rm100 for it by sparepart shop.jus wonder will how to check they are qenuine or recycle one?as some thread discussion said better buy from origin kiosk or hypermarket rather than sparepart shop coz sparepart shop might sell us recycle or non ori product..izzit?

Unless you know the sparepart shop, I would suggest against getting it from sparepart shops. To check if the oils are original, try to look at the details, the packaging, how tidy or neat is it, whether got any seals or hologram or not, whether the rear of the bottle they are the service reminder sticker that you can peel off or not. Small little things like that.

---

Added on October 2, 2011, 9:03 pmSomemore RM 100 at spareparts shop is not exactly cheap also...

This post has been edited by GEFORCEXTREME: Oct 2 2011, 09:03 PM

owh.ok..teh packaging neat and tidy..also got small service reminder sticker there..bout hologram not sure where :-s
also got manufac date ah if ori?
not cheap if in penisular i think.but im not in penisular.thats why wanna compare the price..coz its will be differ by rm10-20 compared price here and penisular

This post has been edited by mfcm: Oct 2 2011, 09:08 PM

In order to use mivec hood n bumper only,u will need to trim a bit at the bumper side to fit proton ori fender..the lock will also need to be readjust

Unless u plan to use Asti bumper then its direct fit to proton fender..hood will need to adjust the lock no matter what

I see... So bro,


Your suggestion is, if i would like to maintain Original Fender, i just have to Buy Asti Bumper plug and play?
Regarding the hood, no matter which one Mirage Hood, i need to adjust the lock?

Btw bro, you have any dealer? I plan to get the Hood first.

From what my mudguard guy told me, Asti bonet is a little longer than the ori Proton fenders. That's what he told me, not sure.

maakosu,
U want the asti or cyborg bumper?
If u want to use cyborg bumper,u have to use cyborg fender.
Or u can cut the bumper a bit on the end of both side to fit the bumper on proton fender.

I see, actually I'm talking about Asti Bumper bro.

Hmm, I like Asti better since i saw Asti have LONG signal light. If i install Asti Bumper, do I need mod it? Or just plug in?

As you said regarding using Proton Fender, if i going to install Cyborg Bumper, is it still looking nice if i cut it? Which part should i cut?


One more thing, i heard some people said, if i use Cyborg Fender and and Bumper, i only can fit in any Proton Satria Lamp accessories like Projector right? Except the signal light? Since it is short?


Amir bro, do you know any where can i get those stuff? With cheaper price. I call in mudah.com mostly selling 1.3-1.5k a set =.= Damn crazy. 1 Bonet RM450. While the other guy that i booked in Subang jaya selling at RM650 a set,which i canceled last minute due to lack of budget since after i change my Wheel to 15" and it forced me to change my rear ABS as the gas ran out, the car body keep cutting my Tyre =.=


OH YA, i think im blinded =.= Daniel just game me a link to FB where a dealer is selling a bonet and bumper of Cyborg, anyway, Anymore places you know Amir bro? I will try to contact the link that Daniel gave me first.

This post has been edited by maakosu: Oct 2 2011, 10:47 PM

that orange thing cause my ABS to engage almost everytime i brake

LoL you mean the bump on the streets?

I'm not sure asti plug and play or not..but as i know it use the same frame like cyborg.
If cyborg bumper fit on proton fender,for me la,not that nice.because i'm a JDM kaki..haha..
U have to cut on the end of both side.got slight slope there.u have to make it straight.
Dei..who said cant use ori head lamp?
Only signal u need to find mirage cyborg signal because its shorter than proton.
Head lamp stick to proton if its bosch glass.

Those JDM stuffs aint cheap anymore man..To cut cost just use mivec hood with ori bumper..Dont bother buying asti hood as it is a bit longer n dont fit nicely..

Normally workshop will know where to cut..its located where the bumper n fender join as the design of the signal lamp is slightly different..

If dont want to trim then asti will be a good choice but the price for asti half lamp is arnd rm 450 n above only for the bumper..full lamp arnd rm 550 n above..

Mivec bumper got few design n market price is different for each design..the most expensive would be the 1 with projector spotlight..

---

Added on October 2, 2011, 10:55 pmAsti plug n play with proton fender..Proven

This post has been edited by aliftaufiq: Oct 2 2011, 10:55 PM

i agree with aliftaufiq.
Now mahal sial all JDM.
U have to patient if u want cheaper a bit.wait for a lower price.
Here's a way to cut ur cost a bit.
Wait for someone who want to revert back to stock proton.
They want to trade their cyborg bonnet with ur stock bonnet,and will ask u to topup a bit.

nope
that is yellow lines....

800 degrees..HOT AH!

i need that maddie's roti canai soon...

dont think the current roti canai can last long under this heat...

2 years back i top up rm 100 n my slightly dented hood with another forummers mivec hood..nowadays at least u need to top up rm 250

The price wont dropla for this demanding stuffs..Few runner already 'tanam' JDM stuffs n halfcut so they can make profit in the future

Eh bro, memang betul la, the link Daniel gave me can look the Bumper or the hood for me. TBH, i am JDM kaki as well, as my 2nd brother is HONDA JDM freak.

Well, I was saying that i can't change the signal light, and only the lamp can use satria one or accessories, sorry if you misunderstood what i was trying to say >__>



Hoho i see... Anything that looks nice cost your money flows like water. Anyway, hobby doesn't stop us a man to make our car as our 2nd Girl Friend. HAHA.

Thanks a lot for the info bro.


I will look into it. Well, after i complete front set, next target is engine Ngehehehe.

---

Added on October 2, 2011, 11:06 pmBTW, Amir_SKULL ha....

Next Friday free? I may be going Shah Alam.

This post has been edited by maakosu: Oct 2 2011, 11:06 PM

I topup rm250 la..cipet mahal.pundek.
But other parts i got cheaper than market price.
Bumper,fender,and signal lamp rm300.

---

Added on October 2, 2011, 11:08 pmI topup rm250 la..cipet mahal.pundek.
But other parts i got cheaper than market price.
Bumper,fender,and signal lamp rm300.

---

Added on October 2, 2011, 11:10 pmwatafak i double posted

This post has been edited by amir_tengkorak: Oct 2 2011, 11:10 PM

D: You applying too much pressure ar?

Spam king..biasa la