Outline ·
[ Standard ] ·
Linear+
Enterprise Networking Mikrotik Routers (RouterBoard & RouterOS), User and owner discussion group
|
engonaplane
|
 May 13 2020, 11:41 PM
|
New Member
|
QUOTE(th3game @ Dec 18 2019, 04:42 PM) hi guys..im still exploring my new hap ac2 and got question.. » Click to show Spoiler - click again to hide... «
I have the following setup:
Internet ---->HAP AC2 (local ip 192.168.1.1) --->Dlink dgs 1100 switch (static local IP 192.168.1.2)---> asus router as APs static local ip 192.168.1.3 & 192.168.1.4 (not Vlan aware devices)
hap ac2 trunking port 2 (vlan30,vlan40) to the switch port 1 n configured as tagged vlans
asus AP 1 connect to port 3 on switch as untagged vlan30
asue AP 2 connect to port 4 on switch as untagged vlan40
vlan30 - tagged port 1, untagged port 3
vlan40 - tagged port 1, untagged port 4
management vlan - vlan1
router hap ac2
DHCP address space : 192.168.1.0/24
gateway for DHCP network : 192.168.1.1
addresses to give out : 192.168.1.10 - 192.168.1.254
interface : vlan30
DHCP address space : 10.10.30.0/24
gateway for DHCP network : 10.10.30.1
addresses to give out : 10.10.30.2 - 10.10.30.254
interface : vlan40
DHCP address space : 10.10.40.0/24
gateway for DHCP network : 10.10.40.1
addresses to give out : 10.10.40.2 - 10.10.40.254
default config enable for hap ac2
i can access the internet wifi from asus AP 1 and got ip 10.10.30.254
i can access the internet wifi from asus AP 2 and got ip 10.10.40.254
questions..
I am able to connect to the hap ac2 local IP (192.168.1.1) via Winbox when connected to mikrotik wifi
I also want to be able to connect to the switch (192.168.1.2) & Asus APs (192.168.1.3 & 192.168.1.4) via local IP wirelessly.
Aleady tried to use mikrotik wifi to connect to those local IP but cannot  Any solutions/suggestions will be highly appreciated..sorry if my question is bit noob if i recall correctly you can do a manual ARP route to force it across. But however I am curious / don't understand why you decided to run 3 VLANs in your home just to split by AP. I have the same setup (but only 1 mikrotik). All run on the same network range (no VLAN) allowing me to easily maintain all APs regardless where I am connected. I don't think you use up 200+ IP addresses right? QUOTE(th3game @ Mar 14 2020, 10:38 PM) anyone managed to setup IPSec ikev2 on mikrotik router for remote clients? this should help https://forum.mikrotik.com/viewtopic.php?t=145138 |
|
|
|
|
Quote
0.0271sec
0.61
8 queries
GZIP Disabled