185/60 hows the feel?

more bumpy / comfy?

steer steering left right smooth anot?

but the tyre got kena daun pisang?

i mean if you use 60 profile tyre , will it kena your daun pisang anot

Quite sometime oledi P2 servis interval 10k km.
Just had 20k servis yesterday  (~9mths from 10k servis)
I never follow month, follow mileage. P2 didnt make noise.

Hmm now that u mention.
True also if they wanna kacau & refuse to let me claim.

Naisssssssssssss......i installed cheap grounding cable not sure got any impact.....

when speed up until 80-100km/j

had hear beep beep sound in front of the speedometer!

why.....car had 2 years 10 month

I install front strut bar only.
Read review & feedback from some owners the rear lower bar cant feel any difference. Dun wanna waste money.

Anyway the alza oledi come equip with rear antiroll bar so no plans to install rear lower bar.

copy & paste from perodua alza club's fb page, owner said that he change injector.   

3.4 wor......

tyenfei....yeah cheap....serius cheap, i stumble on to this pemborong and now i know wat is the cost price of those fake items in Mudah/Lelong/Lowyat for certain car stuff.....sked oso

3.4 wor......

tyenfei....yeah cheap....serius cheap, i stumble on to this pemborong and now i know wat is the cost price of those fake items in Mudah/Lelong/Lowyat for certain car stuff.....sked oso

I've read almost every single post by you..
Thanks for the heads up!

reported yesterday... either wiring mod gone wrong, or Alza memang Kereta Mudah Terbakar...

None other than Uncle Fei's VS... If that is considered wiring works...?

Alza known as Kereta Mudah Terbakar, still wanna do mod on wiring...?    

ok lor... I rephrase lor... Kereta Perodua Mudah Terbakar... my bro whacked my MyVi until total lost also not yet terbakar...   

hi all..

my Alza is about a month age.. and im going to do the 1st 1000km service this upcoming Monday..

my question is regarding the brake paddle.

is it normal if i need to put quite a strong pressure on the paddle to make a brake?

unlike my MyVi, i only need to press little on the paddle brake

but with this Alza.. i have to put some energy to press the brake

i plan to ask the service centre to adjust it.. is it OK?

Thank you.

hmm, I think the sound came from my front brake on the driver's side..
When I opened my window during driving, it sounds hissing...
The hissing became louder when I push the brake...

Is it normal or am I suddenly just noticed this?
I'm afraid if the brake pad has worn out..

now 35k already... Is it time?

Owh.. Thanks for the info!

Now, I'm in Bandar baru Bangi...
Any suggestion on which shop/workshop should I go?
Or all the shop normally have this brand?

Fei, this is not true. I've shared my experience with new brake pads in the earlier post. Summary is, because it is cheaper and easier to put on the new brake pads and let them run, let the pad and the disc brake "smoothen" out each other, so 99.9% (if not 100%) of the mechanics will tell you this.

But the actual way to install (or replace) brake pads and make sure there is no sound/noise, is actually to get a sifu to come attached a machine to the disc and start smoothing the surface, and then add the pad. This is ensure there is no sound/noise after changing to new pads. But since no mechanics have such machines, and asking for a sifu to come by cost money, so nobody does it. They just let your new pads continue to rub against the disc and that's it.

My own experience is.. after changing to new brake pads, after one week still have noise. Took out and skim the disc surface, still the same. Noise for another week. Finally, he called the 3rd party sifu to come and do it on the wheel, without dismantling the disc brake, then no more noise. So he told me all the reasons why very very few ppl do it this way.