[quote=crappy123,Oct 7 2011, 05:36 PM]
[quote=anep,Oct 7 2011, 09:51 AM]
last time arayz sells this but its not uma, shark ceramic i tink..

[/quotes

shark brand good or not? uma i heard like lag abit first then only lajuu. really meh?

[/quote]
Uma block and piston very light only even is bigger than stock. Also lighter than Faito and shark block / pistons. UMA block market price around RM530++ and shark block price around RM250++. But Shark pistons is normal cast iron pistons and not forged like UMA.

if up to 62mm got diffrences? head need to pnp bigger ? tk valve tahan or yamaha ori better

Valve of course TK stronger. Yamaha valve for normal road using is ok. But if for max throttle with the 62mm block at the highway is abit risky. Actually head no need to pnp also can put in 62mm block. But see the foreman do how la.

OMG , today receive a call from HLY, they said my kuda at HICOM..

atlast.. succeeded install undertail R6.. thx to shyan bcos accompany me..
wanna wash bike 1st.. later i upload the pic..

---

Added on October 7, 2011, 8:07 pm@melvinho - ur bike got a lot of toyol.. sure they wanna study the toyol

This post has been edited by budakmentah: Oct 7 2011, 08:07 PM

62mm ... ayam suggest lu change ROD tebal if want tahan lama ...


buat pe kat HICOM ??? sudah ready to vrooom vrooom ???

---

Added on October 7, 2011, 8:09 pmsori ya .. ayam baru habis kerja ... hujan mia pasal ... kerja sangkut ... if not i quick finish .. i might come join u guys

This post has been edited by thianz: Oct 7 2011, 08:09 PM

@thianz - pity shyan.. the one wanna buy his seat cancel to buy.. shyan already buy new seat just like mine

ayam ..... whn saw his autoshow bike .....

should've joined u guys too cod with palex =( but here now always rain oh

how much is a set of tk valve? my current head can just plug and play or need to pnp again

You want buy my one? If you need pm me for the price. I bought it for nearly RM280 4 batang standard size no need pnp maybe need to grind valve. But i alrd use more than one year d. And still in very good conditions. now i going to change to bigger size valve so if u want let me know arr. Can book first before i open up my engine. bcoz i need to wait my head shipment first. before i can fix my new head.

This post has been edited by TryX: Oct 7 2011, 09:24 PM

i think i'll change, how much u selling? and where can i get a new set in penang. wana compare the price

This post has been edited by crappy123: Oct 7 2011, 09:31 PM

No such thing as Faito Titanium pistons LOL But got Faito titanium Valve but is coated nia.

then i gotta check with spayz bout the piston.. where did u buy your valve?

cant yet , i also duno why suddenly at hicom

Fly from Indonesia.

malaysia dont have ? how much u plan to sell your valve

MAlaysia have other aftermarket brand not so good one. Mostly make of magnetic material which can attract tiny metal to stick on the valve. In long terms not so good for the engine. But TK valves is non magnetic material wont stick any metal. So it run much cleaner. And the valves profiles also slightly different from stock valves. And the valves is lighter too compare to stock. Yet it is a very strong valves. Malaysia dont have seller that sell it yet. Bcoz of the costing price to high not much ppl will buy it.

This post has been edited by TryX: Oct 7 2011, 09:54 PM

tim, tomolo bring ayam to motor shop either at setapak or sentul can?

If not maybe I go Batu caves cari.....hmm but dunno which shop.....

guys , see this
http://www.hli.com.my/Corp_Info/Motorcycle...maha/yamaha.asp

---

Added on October 7, 2011, 10:00 pmyamaha motor bikin local , just coverset , rims and tyre bikin from indon / vietnam


This post has been edited by melvinho: Oct 7 2011, 10:00 PM