It's nice so far but ur mobo connector that really spoil the looks by hanging across the motherbaord...

other than that u could sleeve ur power cables for a finishing touch..

And if u could get a piece of acrylic cut to L-shape to cover the PSU, Optical drive area down to the HDD zone ....

It would makes all the cables seems less visible...

There's nth u can do with that mobo connector .. unfortunately ....

go go grab some sleeves and get those cables fixed ...

don't use those masking tape the left over adhesive material would make cleaning damn hard ... just grab some spiral wrap small in black color size from ACE Hardware...

as for the acrylic yes get a piece in L shape to cover everything ... furthermore can do some design on it ..

You could get it from Advertising shop or acrylic selling shop over Jalan Pasar ...

Jalan Pasar is 10 minutes of walk from Times Square or 2 Minit bus ride from Times Square...

Just ask people over there for the direction since most that around there know where is it ....

Check out the site ...

Ac Ryan

It's like transparent plastic board ...

Don't get those that fully transparent ... there's some with non transparent type...

or U could get a transparent version and apply tint for better color presentation yet able to hide the cables...

hmm not a bad idea since he got the skills...

Yah ,,, sleeving the PSU is really a hassle task ... and it's highly risk also ...

but experience would solve the issue in the end ... just don't know how many component spoil...

just kidding .. just be cautious and it can be done nicely ..

hmm you are getting better and better in the cable management of ur case ....

Anyway care to show the inside of ur SS case ... I'm interested with M-Atx lately but so far no any case that suits my requirement .....

hmmm .. not bad,

I think I would get one micro atx system if got nice hardware option in the near future ..

thanks for the photo ... it's really small in size ..

so can't do much with the cables ... since the size and length of the cable doesn't reduces ,,,,

nice job...

hheheh .. finally something new from mADmAN ...

the case still shine nicely .. but don't u think is time for some finger print cleaning ....

anyway it's still nice setup without much custom add on ... purely originality ...

aio .. just grab a piece of wet cloth and wipe it away only mah ....

@vincent09

I would suggest u to get a SATA burner to replace ur current burner or rom there...

it reduces all the ide cable folding here and there ...

further more you could slip those cables into the top drive bay area while ur burner at the second slot ...

this would make most of the cables looks invisible ..

in addition align ur rear fan power connector along the fan before connected to the mobo ...

hmm basically u could go for Panasonic at RM139 or Pioneer at RM150 ...

It's consider cheap the length is shorter than older generation of burner ..

almost identical like DVD-Rom ...

U could always sleeve ur PSU or just do some custom cable with ur own wire color preference ....

First of all, there's not easy way with hiding the cables within an acrylic case ... since it's fully transparent ...

unless u have a modular power supply ... futher more it's not practical to use acrylic case due to it's solidness ..

most of time it just can't withstand strong impact ...

a better advice is get another steel or aluminum case to replace the current case ...

it means a power supply that has the flexibility of attaching and removing the require cable to run the system ..

well known brand such as Tagan, Silverstone and Corsair has such PSU ...

hhaha ,, there's a way to get it done ...

first make a box and install it at the optical drive bay then have all ur power cable beside 12atx and 4 pin connectors goes through the box ..

so all ur cable would be within that box .. make sure it's not fully trasnparent as well.

then make own custom cables to connect all ur devices and lead back into the box so that u could connect it to the power cables..

and make sure use cable tie base and zip tie to align or ur custom cables nicely ...

by doing that u would get a perfectly arranged acrylic case without cables crawling here and there..

that's not solving the problem from the root rather just disguise it behind curtain ...

make it simple just a box with some wires goes in and out ...

however only wires that needed goes out ... something similar like modular PSU design just that u aren't changing ur PSU ..

hahhaha .. that's a good question that uncle Ianho can does ...

he's the pro in all the modding stuffs. .. .

It's better not to get a cheaper and lower end PSU since it would reduce the stability of the system and doesn't last for long..

today just got a PC from friend that need a new PSU and case for better cooling ..

her PSU only lasted for 2 years with minimal usage ...(PowerLogic)

2mr have to go LYP again to pick up a new PSU and Lian Li case ...

Something like this:



It fits into ur case and screwed to the optical drive bay

all the PSU cables goes in to the box except for mobo, 4 pin and gc..

then create some custom cables according to the length and sleeve it nicely that connects from the PSU cables within the box ..