Unifi [Guide] UniFi - Any custom router can use UniFi, For Huawei HG655a & ZTE ZXDSL 931DII
|
|
 Aug 26 2011, 02:38 AM
Return to original view | Post
#1
|
 
Junior Member
70 posts Joined: Jan 2003 From: Kuala Lumpur 
|
Confirm IPTV can work with the same way as above for internet. I now have internet on LAN 3 and IPTV on LAN 4
 Only observation is that the HG655a modem may appear to hang and the GUI turns unresponsive after pressing "Submit" when changing the port for ptm1.600. The setting that was made would be retained however after a power cycle. You may also need to power cycle the IPTV box if it doesn't detect the changes.  Thanks lighter for making this finding. TM's DIR-615 is now removed from my set up, saving some electricity and making the planet a little greener  |
|
|
|
|
|
Sep 26 2011, 10:43 AM
Return to original view | Post
#2
|
|
Junior Member
70 posts Joined: Jan 2003 From: Kuala Lumpur
|
QUOTE(colins @ Sep 26 2011, 10:35 AM) My IPTV doesn't work despite following exactly what the guide says, any idea what went wrong? Did you assign VLAN 600 to a different port, plug the IPTV into the port and turn off VLAN tagging? And also, did you confirm that the HG655a configuration is correct? Mine hanged a few times trying to set that right. |
|
|
Sep 26 2011, 01:52 PM
Return to original view | Post
#3
|
|
Junior Member
70 posts Joined: Jan 2003 From: Kuala Lumpur
|
QUOTE(colins @ Sep 26 2011, 12:16 PM) Nope, other than those instructions listed, everything else remains untouched. You need to do exactly the same thing for VLAN600 as you did for VLAN500 but bind it to a different port - I used port 4.VLAN600 is bind and tag to Port 1 (this is the default and I didn't change this) What other config on the HG655a that I need to look out for? Thanks in advance for your guidance. I was the one who tested and informed the TS that this works. This post has been edited by timothyc: Sep 26 2011, 01:53 PM |
|
|
Nov 22 2011, 06:46 PM
Return to original view | Post
#4
|
|
Junior Member
70 posts Joined: Jan 2003 From: Kuala Lumpur
|
If you didn't get the password list during your installation by the TM technicians, call the Unifi support line and ask for it. They will give it to you by email.
|
|
|
Feb 21 2012, 11:43 AM
Return to original view | Post
#5
|
|
Junior Member
70 posts Joined: Jan 2003 From: Kuala Lumpur
|
QUOTE(J1@l_ l_l l\l @ Feb 20 2012, 11:52 PM) Mine internet and VOIP work but the IPTV doesn't work as according to this. There is no mention of ptm1.600 or VLAN600. Would U guys mind to share the trick? I am trying to remember as I do not have the HG655a anymore...So as mine, I guess probably due to the ptm1.600 or VLAN600  VLAN600 and VLAN500 are having the same settings? Do exactly for ptm1.600 as you did for ptm1.500. Make sure that the port binding for ptm1.600 is to a different port compared to ptm1.500 as you did for your internet. For example.. if ptm1.500 is set to LAN 3, set ptm1.600 to LAN 4 only. Both ptm1.500 and ptm1.600 should not be binded to the same LAN port. Turn off VLAN tagging as well for ptm1.600 |
|
|
Feb 23 2012, 06:14 PM
Return to original view | Post
#6
|
|
Junior Member
70 posts Joined: Jan 2003 From: Kuala Lumpur
|
QUOTE(J1@l_ l_l l\l @ Feb 23 2012, 06:10 PM) Cannot be done bro. When trying to remove the VLAN tagging the HG655a says "The binding port must have VLAN tag". If you can't remove the VLAN tag for ptm1.600, how did you do it for ptm1.500?Another thing, it should be IP bridge or PPPOE bridge for the IPTV? I do not remember the other settings for ptm1.600 right now - It was left unchanged. I think it should be IP bridge as the IPTV does not need PPPOE. |
|
|
Apr 18 2012, 11:42 AM
Return to original view | Post
#7
|
|
Junior Member
70 posts Joined: Jan 2003 From: Kuala Lumpur
|
QUOTE(unknown_2 @ Apr 11 2012, 11:04 AM) i lost my unifi account password. Call Unifi support. They will help you.if there anyway to retrieve it? Added on April 18, 2012, 11:53 am QUOTE(E1 - AKG @ Apr 11 2012, 12:12 AM) Need help! Connected the Airport Extreme to LAN2 of the ZXDSL931 (comes with UniFi) and the Airport Extreme shows "Your Apple Wi-Fo base station does not have a valid IP address". You will need to change the VLAN trunk setting on the ZTE VDSL modem to enable direct PPPoE from your Airport Extreme without needing the UniFi supplied D-Link router. Really appreciate any help at all  There was a guide by solichan here at http://forum.lowyat.net/index.php?showtopi...post&p=36938431 but the images has been removed. If I remember and could find time to do it, I will make some screenshots for you from my unit. Alternatively, you can use the Airport Extreme, but with the D-Link as a VLAN bridge. For this, please refer to the guide at http://unifi.athena.my/custom_routers.php This post has been edited by timothyc: Apr 18 2012, 11:53 AM |
| Change to: |  0.0214sec
 0.94
 7 queries
 GZIP Disabled
Time is now: 30th November 2025 - 09:22 AM |
Quote