Anyone of you try this EO before ??

I found out my bike most of the time very hard to start after ride ......

the koso rpm meter show the rpm below 0.5krpm ....have to rev at 0.5 and above to prevent engine stop during traffic light.....ZZzzz

i have changed my CDI, racing block, high cam, racing spring valve, bigger carb...Zzzzz

any sifu-sifu here know what the problem and how to solve ???

[

Thanks TryX and thianz for the reply....will try it.

This post has been edited by mls_gamer: Aug 3 2011, 10:24 AM

i jealous ...
i only 56~58 mm.. forgot which one liao~~~
since u are using 62mm... any upgrade need to be done to pair with the 62mm.. ?

Adjusted the idling screw higher abit in between 1.1~1.5k rpm... thanks for the guide...

with bigger block ..come with more heat right ??? need to improve our bike cooling system ?

I wanna do my bike like this.. but the front disc i don't know where to get it...haiz~

u tear off all the sticker will be more look alike...
How much the full set footrest, yamaha racing seat and the racing boy side mirror ?

....big different leh~~

Today installed wrong combination ..ZZz

15-38 415 (RKM GOLD CHAIN).......

should be 15-40 ...haiz~

Guys got any idea that change the whole front brake system by using all racing boy item cost around how much ? and what need to change ?
I already ordered racing boy 260mm front disc plate...
want to order the racing boy brake hose... but expensive leh~haiz..

the seller said front the disc plate is below rm150..... but i pay deposit rm50 first.....

i ordered black colour deh~


u means only the caliper cost rm200 ~rm400 ?

got lah~

for 300mm.. check RB 2011 catalog.....

ohh... tat why i still very hard to start my bike after change tonew battery ...

---

Added on August 5, 2011, 9:13 pmget the yamaha one....

This post has been edited by mls_gamer: Aug 5 2011, 09:13 PM

no money mod car....
i mod bike better...

i read and saw at t135 forum.. the uma 62mm block pecah woh~~~ i dunno how they modify until pecah...zzZZ

---

Added on August 6, 2011, 4:26 pmu go visit the racing boy official website u will know what is that...

This post has been edited by mls_gamer: Aug 6 2011, 04:26 PM

Nob1 tribold with silencer is around how much ?

the inlet ID (inside diameter) of the pipe is bigger than the stock right ?

Guys.. if i change my whole block system to fz150i, uma high cam, kehin 28mm carb...... will it be more stable ?

just plug and play or need to do some modify ??

Boss patrickloo...how much is your Nob1 tribold ?

got imitation for this Nob1 tribold ?
need to modify or just plug and play ?

thanks for the info
will change to Nob1 tribold... after i finish setup my front racing boy brake system....

---

Added on August 7, 2011, 1:13 ampatrick12122 ????

This post has been edited by mls_gamer: Aug 7 2011, 01:13 AM