Did my pointers help?

how much refill ink BCMYK for canon ip4200 CISS? do have chemical solution to clean the printer printhead? tq

Do u bundle with Printer?

Was looking for a All in one printer that support CISS. If u know, mind to recommend either Canon, Epson, HP? Printer price range shud be around 200-300 for small office and home usesage. Not sure about the pricing for CISS in which i hope u could tell.

Thx ^^

Hi ! I have a few question to ask you about your CISS before I make my purchase decision.

1. I want to know the CISS for Epson TX200 is Dye ink or Pigment Ink. ?
2. What the difference for the color printout of the CISS compare to the original ink ? Eg. over saturated red, under saturated yellow
3. Is there any known difficulty for the CISS & Epson TX 200 ? Eg. Manual Chip Reset, Printer Hang after printing, Ink Leakage

PM to you your requirements.

Sorry I don't bundle with printer as shipping cost is not practical. Printer prices are quite standard everywhere these days.

Recommend Epson or Brother AIO for your needs. Once you have narrowed down your printer model based on budget, you can always check with me for ezCISS support.

Hi,

1. As per your requirement/budget, Dye or Pigment available.

2. As close as possible based on printer series (I DONT sell generic inks). NOBODY can guarantee 100%. Miss matching can be due to many variables, most common is due to uncalibrated LCD's. Under/Over saturation can be due to wrong printing 'Profile', remedied via correct settings OR manual fine tuning in the 'advance' settings.

3. All new Epson printer models are manual reset for now. Printer issues should not be confused with CISS issues. Other then that.. go go go



This post has been edited by ezCISS: Jun 2 2009, 12:51 PM

Pls PM me the price for EPSON TX200 CISS with Pigment Ink and Price for Pigment Refill.

Hi,
Please pm me the price for TX400:

1. dye refillable cartridge.
2. pigment refillable cartridge.

I scared to use CISS now as it spoil my Epson R310 so I want to use refillable (without the tubes).

Please provide info for:

1. How many ml the refillable cartridge can hold? Some sellers sell half capacity one which hold only 5ml, such a hassle because print 4 A4 photo and already have to refill.

2. Is it combo type (all four tanks stick together) or separate type?

I am looking for separate full size refillable cartridge which hold 13ml (or more) of ink like the originals. If combo type also can as long as is full size 13ml and no 5 or 6ml.

Thanks very much!

Sent this afternoon for your consideration.

1. I have both types. It depend on the latest PCB of the COMBO chip arriving soon. Previous version COMBO could not mount on the full size cart. Newest version look possible.

2. COMBO, stick together with reset button.

3. Noted your requirement. Will update you when the new V27 shipment arrives shortly.

Thank you for your reply. I hope can get the full size ones too, pls pm me if got, interested to order! Thanks.

When V27 shipment arrive shortly.. I'll PM you on the full size cart status

I've received ezciss cartridge for my hp printers. Thanks a lot! Very fast services, yesterday bank-in, today at 11a.m receive it at my home in Perak.

Free BUMP for you!

bro,

do u have ciss for canon mp160? pls qoute me price+ship to penang pls

Before your decide, please see HERE and HERE

hey bro.. im interested in the ezciss system for hp officejet pro k550
wats the price like and do u provide installation (i have the empty cartridges)

does it involved drilling and stuff?
and how much does the inks cost??

im from klang btw.. =)

no drilling... but for my ciss, i got a screwdriver with a drill bit at the end. use by hand... no bits of plastic everywhere. then there are the silicone stoppers that you put the elbow joints into. very simple. ciss is good.

HI there..

Your K550 using HP88 cartridge type. Product comes New, with ink, with Auto Rest Chip and Complete in 2 options

a. Refillable cartridge
b. CISS (Refillable cartridge + External ink tanks)

Depending on your Printing loads, you can choose the best setup for your needs.

For this model, Plug and Print out from the box. Installs like you would normally do with the Originals. Nothing fancy and complicated.

NO drilling or your old cartridges required.. I provide complete set out of the box.

Will PM to you best pricing for both options. My previous V27 stock for HP all kena sapu already.. V28 can restock for you.

This post has been edited by ezCISS: Jun 13 2009, 08:22 PM

Any news on the TX400 full size carts? TQ.

Newer version chip arrived last Monday. For 3/4 size is good, For full size, still investigating best solution for the IC clearance. PM you when confirmed OK

The 3/4 one can fill how many ml? As long as can fill at least 10ml without leaking should be okay for me.

What about CIS system? I scared to use CIS with my TX400 cos I scared it leak and spoil the printer, expensive wor...

i wan do the ciss for my mp160..it is i need to bring the printer to you?or i just pay u n u postage the cartridge with ciss to me?then i plug to use>?pm me for more details..tq