Outline ·
[ Standard ] ·
Linear+
AMD® Socket AM2&AM3 Overclocking V25, 990FX, Bulldozer!
|
=..=
|
Mar 16 2012, 01:40 PM
|
Getting Started

|
i have a stone age x3 440 but i cant seem to get it stable past 216 FSB?
mobo:m5a97, ram:kingston hyperx 2x2gb 1600ddr3, psu:mushkin 500w.
i set ram timings at 9-9-9-27 dram freq 577.9mhz vcore at 1.4v
it used to be able to run prime 95 for a while with 225 FSB. is my proc dying? if it is i might as well run it at 3.7ghz......
|
|
|
|
|
|
=..=
|
Mar 16 2012, 03:43 PM
|
Getting Started

|
QUOTE(cloudwan @ Mar 16 2012, 02:33 PM) Well it all depends on the cpu sir, sometimes its just the case of having a lemon chip which cannot go any further.. Mind posting SS of ur cpu, memory & mobo tab of ur cpuid? 
|
|
|
|
|
|
=..=
|
Mar 16 2012, 03:53 PM
|
Getting Started

|
QUOTE(cloudwan @ Mar 16 2012, 03:47 PM) Whats the cpu temp when u were running this? at full load 52-53 degrees C.
|
|
|
|
|
|
=..=
|
Mar 16 2012, 05:06 PM
|
Getting Started

|
QUOTE(cloudwan @ Mar 16 2012, 04:11 PM) Try setting ur ram tRC higher & turn on (LLC = load line calibration) in ur bios & up ur CPU-NB volt abit also.. see how.. FYI Athlon II isn't much of a clocker, not many chips i have seen that can oc high..  increased the CPU/NB voltage to 1.2... seems to work on 220FSB........ how high is safe? as long as temp is good?
|
|
|
|
|
|
=..=
|
Mar 16 2012, 05:17 PM
|
Getting Started

|
QUOTE(cloudwan @ Mar 16 2012, 05:09 PM) Try to keep ur cpu/nb voltage below 1.35v is good enuff for 24/7 i believe.. I'm running mine at 1.3v IIANM.. forget already Post ur latest SS lah   Will try to up FSB together with cpu/nb volt later
|
|
|
|
|
|
=..=
|
Mar 16 2012, 09:49 PM
|
Getting Started

|
QUOTE(soulfly @ Mar 16 2012, 09:42 PM) any luck with 4th unlocked core? Can unlock, but temp jump to 70C idle.... been looking for CM hyper 212 evo but cant find at my place....
|
|
|
|
|