here no 97 evo ler.. boring distro not bring in certain range..

i see the cooler same only..

haha i still using bios.. not using windows program..

no skills also no point yo..

i took 960t coz the hidden extra cores.. luckily can push..

most can hit 300mhz like that.. yours is ok la..
try increase the NB HT voltage if want push more..

u know what.. it might be coz of the IMC..
one thing that u need to know when clocking amd..
some cpu n mobo convenient with certain multi or divider..
this is the beauty of overclocking amd..

which means.. there are alot of variable involve..
u can't just select 1 htt or cpu multi to get the best results..

don't make this 'alot of setting work' to set your mind as hard task..
every inch of value in the bios is useful..
make it positive.. this is how the OCer gain their knowledge beside readings..
so happy tweaking..

oh man, still remember pushing the s754 to the limit with very tight ram timing with the crappy mobo..
nowadays mobo much more tolerance wise.. if failed can just switch off.. bios will reset.. last time need jumper man.. and some can't even boot with the same RAM!!!

could be your mobo cannot support above 250?
IINM also brisbane max around that clock..

4gb kit hardly get tight timing.. maybe u can push 900-1000mhz.. 2.1v

bought my amd and left it switch off only.. too fast

for me seriously i just push.. if it can't go it will stop somewhere.. not explode..
those degrade thingy i just let it be.. how long u want to use the proc btw..
should worry it being obsolete rather than their lifetime..

lol love intel somemore.. hahaha
i didn't switch on mine for months..

nowadays ppl can retire several times..
larik..

hi all i'm new here..

tak sempat nk tweak...



This post has been edited by 8tvt: Jun 20 2014, 11:00 PM

crazy cpu temp.. reduce voltage..
nowadays no passion.. lazy to tweak..

still play2 with d voltage.. the calibration makes it sky high.. i want to make the voltage flexible with the speed...
not good ram though..

lol i can't find cnq..
i'm playing with the LLC, if fixed voltage, when speed come to load it require more n not stable...
the calibration works well just i need to lower down the initial voltage for lower speed operation.. so i got optimum setup..
so far the voltage is stable no vdroop issue like before..

just that at first attempt i set at higher base voltage so it's freely boost the voltage..
the weird thing is the option supposedly in percentage.. but i have only enabled/disabled option that may cause to jump up to 100% max
that's the reason the temp is so high..

ive no other option that flexible other than that CPU LLC n CPU NB LLC.. i can say it control and adjust the voltage n vrm accordingly much better..

much simplified version.. ok la not so pening..

i cannot recall having that offset setting.. just the above LLC only...
even d cnq option not avail...

maybe this board too simplified..

http://www.hardwaresecrets.com/article/ASU...herboard/1772/7

similar like this..

http://www.hardwaresecrets.com/fullimage.php?image=55012