Yes. Unless u wanna install a sports cat-con for ur car which might costs a bomb. Usually for people who wishes to have a few hp 'derestricted' from their car but not willing to change extractor, they remove the cat-con & replace it with standard piping. This way u may be able to get up to 2-3 HP extra with our car, but that's about it. Not as effective as replacing the whole extractor.

Anyone here install coil spring buffer for their PE? any improvement?

need to ask 1 question.. works filter during cleaning, water must flush from which side?

emm....    still cannot imagine the sound than you guys always mention tin kosong sound when just only change extrator wihtout chnaging the rest got example at youtube can share ah ?

Anyone here install coil spring buffer for their PE? any improvement?

need to ask 1 question.. works filter during cleaning, water must flush from which side?

From backside  lo. Your favourite position.

From backside  lo. Your favourite position.

Let me find n show u lah..
Used to install it to prevent my tyre from hitting the fender/bracket..
From bottom? From the part that doesn't trap the dust...

you mean doggie?

Actually, from top beacuse the air flow from bottom to top.

Yes, but which part of the air filter are u cleaning? top or bottom? If u flush the water from top, the dust will all stick at the sides of the air filter n trapped there. If u flush from bottom, the dust is flushed out together with the water.

Last time, Zeng show that it must let the water flow from top leh. 

Which is top & which is bottom now??

actually i also confuse lo

---

Added on June 22, 2011, 7:26 pmhttp://www.mudah.my/Neo+cps+1+6+extractor+taken+out+from+cps+r3+neo-10179313.htm

this one is 4-2-1?

4-1. Our standard extractor is also 4-1.

4-1. Our standard extractor is also 4-1.

---

Added on June 22, 2011, 7:29 pm

cheh.... i thought r tiga use 4-2-1

---

Added on June 22, 2011, 7:32 pm

if i see, i'll run these motha fockers over with my PE, make sure their hands is detached from there body and not able to sambung balik..

Used to install it to prevent my tyre from hitting the fender/bracket..

How much did you install it for front and rear?