I did saw the one of the service record stating warranty expired on 2009. But the number plate there write "5 years warranty" Maybe will call up Proton and see...

I heard Proton vehicles that are still under warranty can get an extension card or something to guarantee lifetime power window. For those warranty habis and habis lama lama dy, can still service the window at Proton SC, but they'll change to the newer "less faulty" version of power window motor, switch, bracket, rubber, and stuffs..

So if not under warranty dy then meaning no need go SC dy la. I think I call Proton after this month and ask them 1 by 1 and reply here...

Just solved the driver's door panel rattling sound, one of the clips came out and didn't fit properly. Adjusted and now done with the door. Now gatal gatal want to soundproof door and cabin.

Regarding the the stock Clarion CD player:
1. Got front speaker output? Since stated at panel 4x__W output.
2. Ada Aux in/ Aux out?
3. How to get the player out ah? I tried to remove 2 screws on the bottom sides of the radio panel (Passenger and driver leg there). But when pull like no reaction one... Want to install el-cheapo RM5 tweeter first.
4. How to set time? LMST dashboard designer forgot to put clock...

Aiyo... Masa untuk tukar la... Cassette player susah sikit. Not like every time need to rip cassette from computer...

How old is your car? Thought stock grounding should be sufficient until like 5+ years then start to oxidize until very very bad?


Thank you. Will PM TS after my exams. Alternator belt air con belt and air con bearing will be on highest priority for servicing now... Ok, will try and hag and see what I can get...

The SQ of stock LMST clarion model DB238R seemed to be quite good, at least better than waja mitsu stock clarion's. Not thinking of upgrading ICE yet. Cause planning to get some money to soundproof door and wind noise, wrap seats, add some bars and minor minor addition to the car (mudguards, DRL/spotlight).

Set time I dy got hold of the manual online after long search for this model. Basically quite useless but better than don't have Just tried and randomly press... Got it dy. Thanks.

Yup, the LMST doesn't have clock on dash but only on player right? Mine is 2007 model.
My tinting which is done by previous owner is Tint-Shop, dy bubble like mad. I'm considering to re-tint.

Had all the plans on my mind dy... But my exam not about LMST

Edit:Corrected the radio model number

This post has been edited by cyanboy: Nov 10 2011, 01:58 AM

Branded radio not easily rosak. Realized that mine is going to 5 years too, no complaints yet. My headlamp is significantly brighter than my parents 8 years ride. I think will do grounding on theirs first. Is those 3.5mm2 welding wire good enough?


Thought CAI need find cleaner intake place? I scare stones and sands sucked in and everyday need clean air filter Sorry ar, performance wise i'm still fully noob.

Very neat work... Yang itu DRL I plan to install

Won't those dirt/sand/stones being directly "vacuumed" into the filter?


That's really eye catching.

Ok... See how la... Those copper welding wire doesn't come cheap also, RM10+ per metre. Other grounding cable like HKS all those dunno real copper or not. Unless I can slice the wire off in front of the sales person...

Well, I think grounding is important for older cars. The older the better the improvement. White mice pula

I'm the first ahbeng lo. Aimed some DRL at Brother's to drop price since getting my LMST. And the price dropped this month

I'll say Proton Centre Glenmarie. If want really 100000% Ori Proton there apa-apa pun ada, if there no stock than Malaysia difficult to find already. But a bit more expensive than Taiwan China or outside ones lo.


Problem lagi,
The boot area on the both sides got water leaking in... Thats after rain.
Today first time wash car also leak, but right side only ... Anyone know where probably the area of leak? Rubber seal seems still good... Haiz...

The bonnet mat "wings" part is wet today...



And also... Mudflap can get from where? Those last time punye iswara's aeroback can fit into LMST? Brother's sell a lot but dunno ngam or not also... Not even mention those size 4 bolts missing... Dunno where to buy..

And lagi... When I turn on small lamp, then i push side signal (not fully push to engage side signal), the light on meter, air con panel, 5 switch panel, front small lamp, will go off suddenly then on again. Connection problem? The driver before me so kaw kaw signal till batang also spoil?

This post has been edited by cyanboy: Nov 13 2011, 02:48 AM

Tail lamps area, haizz... will try to overflow it later... That signal switch doesn't seemed cheap though...
Will check with spare parts to get mudflaps... Here road like ultra stoney... drive fast bit bodykit and bumper paint calar very fast...


I'm aiming for Brother's one and can get it darn cheap. Maybe you can start looking from there? Unbranded ones Rm30 got dy...


It's a bit pricey but if the car is that nice then, well, you just got yourself a nice and worthy car...


Problem lagi. When press brake got screeching sound... Happens nearly all the time. 4 sides also have it I think. Sometimes brake too hard sounded like horning people waiting on red light, all ppl look at me

Is it normal again? Or brake pad going to "kong". I saw 1998 Wira's manual saying Proton ori brake pads are designed to notify user like that when brake pad going to habis.

This post has been edited by cyanboy: Nov 15 2011, 01:56 AM

Another LMST I driven before also have this problem... Okay, will prioritize it braking system... Erm, will the metal clip kept on scratching the disc and causes uneven plate? Then need to polish again right?


Is it a crack? They'll count by the size of it. They will drill a hole through and apply some liquid on it and seal it. Then polish off nicely. The pricing you quoted is quite standard. Did you apply rain repellant? Results might not be that good if you had applied rain repellant.

Why not claim insurance? Wait for sifu's to reply about insurance...

Wa, replay so fast.
Worn brake pads will cause brake disc uneven problem? Cause skimming then expensive liao lo

Will note this as urgent. thanks.

Okay... Will see how then...

Change brake pad only ma, now poison me go change brake disc pula


You can confirm that his saman has no same offence as yours? I think he should get the same offence too...
But if he did not... Then maybe somebody main-tipu-you-know-malaysia-la situation

Maybe it's time to put CCFL inside your headlamp and maybe will escape like the BLM

Wah, your fog lamp... Bright like day light leh... Lol...
Maybe that night unlucky la... Just treat it as a "kick" to get your CCFL faster


Alah bisa tegal biasa... But still


Same happened here. Get a few pages back you can see my picture about it.
Some of users said that its from the rear light assembly area, but mine was well dry for that area...
For my case, I just found out yesterday, it's from the number plate assembly that whole part. The rubber seemed to give way dy. Now everyday rain, I everyday wipe leh, like I become her dayang pula...

Btw all sifu, now i'm going to take out the plastic cover for my rear bonnet. So basically I will gotta break a lot of clips to get access to the leaking area... So any idea where can buy the exact same one? Even proton parts centre also not selling... I think need to buy at least 20+ clips to replace for this and tukar all other damaged ones together.

This type of clip:



And I also planning to install DRL and foglamp... Where can I get the wire from the cabin that can bypass the firewall to install switches?

Okay, looks like very easy to take out with so many help dy. Erm, I do bought it at 50cent per piece but the size too big. Will go round round spare parts shops tomorrow. KuaLe_AGX is that totally same as stock one? If not same nampak not syok le...


You mean bottom of the aeroback lid then flow to the bonnet? Then you have the same situation as me It's a famous lmst prob.

But today rained whole day while car parked and travelled outside, no sign of water... Weird... At least today I no need become dayang...


Well, i'll buy like 30+... Family waja gotta replace some also. haha... Bitumen strips? Will check out... I have lots of waterproof silicone though...

I also budget second car la... but seemed getting more and more poisoned

Went and serviced my brakes in Proton...

Brake pad so called overheated by previous owner... Scratching my brake disc dy... But the brake pad still got 30% more to go... (Now really want to kill the lady owner before me)

Proton aka Mintye Brake front brake pad RM90 and Flush to new Petronas brake oil RM70... All inclusive of workmanship.
Is it VERY expensive?

Why got the feeling of being cut throat by Proton one... i asked before Mintye brake pad only RM28 leh
Somemore 845am wait till 1200noon...


If 160 fully stock u dare?

This post has been edited by cyanboy: Nov 19 2011, 12:34 PM

Everywhere same price?

Okay... Heard that rapid stop is one of the best dy... I'm done with my pocket

Pertama kali servis tau tau la

Okay... I'll try and push mine someday...
Looks like i should not go back to service centre later time...

Went highway from central to johor to and fro...
6.28 litre per 100km full highway and only very little of town driving... Ok kah?
(PS: Drive not more than 110 all the way, revving not more than 3000rpm )

Going to install foglights... I do heard that 1st version of MyVi foglights fits very well to our bumper.
How about the second version onwards punye MyVi foglight?


First version...



Second version...

This post has been edited by cyanboy: Nov 21 2011, 05:40 AM

Curious, ada warranty?

My car 27k km but gotta crank quite long to start... Is about 2-3sec to start... And its slightly longer than family waja still... My friend say ppl crank 1 sec start dy... Is it so fast time to change distributor dy?

Ok... Will KIV that...

LMST can tahan that mileage then I no need to worry so much now...

Second that

This post has been edited by cyanboy: Nov 21 2011, 11:06 PM

Yea, second one seems more fit although its smaller... I'll try to catch some MyVi's in my area and measure dimensions... Just hope they don't think that i'm stealing their foglights

Sudah shift belum?