Suzuki GSX 110.

This post has been edited by alexei: Jun 21 2011, 12:29 AM

@alexei

I just measure the exhaust below the bend as following

- Stock manifold circumference is 3 inch
3inch = 25.4mm X 3 = 76.2mm
diameter = 76.2/3.142 = 24.25mm = 24.25/25.4 = 0.95 inch pipe

- the bigger manifold circumference i install is 3.5 inch
3.5inch = 25.4mm X 3.5 = 88.9mm
diameter = 88.9/3.142 = 28.29mm = 28.29/25.4 = 1.11 inch pipe

pls kindly correct me if i wrong calculate...

Now reach red line is so much faster but got misfire after release throttle at high RPM.....

I ll update u again when i test top and RPM.....

Yar my bike also damned kotor outside Low profiles..

Lol...Sienz la...Thainz..tomorrow on or not?

Your bike so sui orh!!!

supaya org tak pandang ke arah LC saya .... i tak cabut kunci .. letak kat rumah org pun tak nak ambil

---

Added on June 21, 2011, 1:08 amthe stupid seller ... 0630 lepas kerja woh .... thn i canot pakai cockoil liao lor .... so apa oil syok pakai ?

This post has been edited by thianz: Jun 21 2011, 01:08 AM

Lol....Later hv ppl take then u cry also useless...><Bk4 la...Lolx...Sienz la....Wan to wash my bike but apartment didn't hv place to wash my bike...

Than pakai cooking oil ba

take lah .... i go get 250 main .....

cockoil ... leave it lah

pakai other brand cuba dulu .... coz need wait him finish work .. he at danau kota ... i ask him to come UTM ...

rockoil la??? Aiyo...

send to wash la, RM 5 oni or maybe less depends location...

Lol...Tomorrow will be...And if can i also wan wax it..>.<

i found picture i took during bukit tinggi .....

i saw mentah using tht pic as profile picture at fesbuk ... kekeke

selalu call him mentah .. nama betul pun tak tau .. mr aizat

But the problem is mental more sui mah....Haha..

Just for your guys information.....

- Stock manifold circumference is 3 inch
3inch = 25.4mm X 3 = 76.2mm
diameter = 76.2/3.142 = 24.25mm = 24.25/25.4 = 0.95 inch pipe

(according to pipe classification it just a 1/2 OD (outer diameter) inch pipe)

- the bigger manifold circumference i install is 3.5 inch
3.5inch = 25.4mm X 3.5 = 88.9mm
diameter = 88.9/3.142 = 28.29mm = 28.29/25.4 = 1.11 inch pipe

(according to pipe classification it just a 3/4 OD (outer diameter) inch pipe)

---

Added on June 21, 2011, 10:32 ambro, nk confirm u buka cover depan tengok ialah 14T atau rasa je?

I check dkt web bkn 14T tetapi 15T/38T utk LC ES 2011....

FZ is 14T/42...

---

Added on June 21, 2011, 11:19 amtoday morning, i ride bike to work, bcos my car gear super difficult to masuk gear even can masuk the car change gear like track car, i scare goin to kill the gearbox....

On the way, EX5 cucuk me at during cornering in moto lane. EX5 torque at corners quite good or maybe my skill sux. So everytime after exit corner, i tinggal him bcos his bike stock only 100km/h on GPS, when i drop 3rd on around 10+, he tinggal jauh d....the best part, i think he also blur case after i drop gear at high RPM got come out gas...haha

This post has been edited by NewGUY: Jun 21 2011, 11:21 AM

LOl..haha...The Ex-5 sure blur already...if 15T-38T then same as my lc gear ratio lolx???
@Thianz...Finish exam already?

ya lor

Connection at Genting sux man. In the staff quarter that is.



Attached thumbnail(s)

thx Newguy for the measurement.

This post has been edited by alexei: Jun 21 2011, 11:47 PM

the diameter i measure is at a...

i only change a....

the misfire comes out from the muffler....

---

Added on June 21, 2011, 1:13 pmi met aaronlc135 about tire, he can explain to u...

he take few picture at my bike at the parts...

This post has been edited by NewGUY: Jun 21 2011, 01:13 PM

encik shyan .... u sedang tidur keh ????????? elo .... i nak pergi service LC .. pastu pergi gila