Finally JBed my ipad 2 3g, so now can i restore it? will i lose my jb?

This post has been edited by Damonzero: Jan 22 2012, 01:25 AM

yay +tab, and multigesture enabled ^^muacks i miss you tab!

http://www.redmondpie.com/how-to-jailbreak...-tool-tutorial/

This is the exact step i did.. Works

Finally, able to Jailbreak my iPad 2 32gb Wifi

For anyone who is getting this error

"Cinject.exe - Entry Point Not Found""The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll."

or

"Cinject.exe - Entry Point Not Found""The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library SQLite3.dll."

This is the solution:

1. Go to C:\Program Files\Common Files\Apple\Apple Application Support
2. Copy these 2 files libxml2.dll and SQLite3.dll
3. Navigate to C:\Windows\System32
4. Paste the 2 files earlier
5. Try again, that error should no longer show up

Enjoy.....

p/s: took me nearly 2 hours to figure this out....

u must run cmd as admin (right click and run as administrator if u r on win 7)...

that's always d 1st rule of thumb whenever u playing with command prompt..

Cydia Jam today...some tweak cannot install....

Mother of God, done it !

---

Added on January 22, 2012, 1:52 amSeems tricky for me, I had to enable VPN while it was running those codes after I entered cinject.exe -w

Then it rebooted and I have Cydia straight away !

This post has been edited by karhoe: Jan 22 2012, 01:52 AM

how to get vpn?

Can anyone help trying so many time but always failed.... haizzz from evening until now



This post has been edited by yanz070: Jan 22 2012, 02:10 AM

what error u got???

Im using cinject

Microsoft Windows XP [Version 5.1.2600]
© Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\USER>????

This post has been edited by yanz070: Jan 22 2012, 02:17 AM

ooo..okok....
First download Cinject...Then extract it into C:\cinject_0.4.3\cinject_0.4.3...

Ok dah buat lepas tu bro
mcm ni sampai subuh baru siap jb nie... alahai

This post has been edited by yanz070: Jan 22 2012, 02:23 AM

Step 1: You will first of all need to download the compressed folder which holds all of the necessary files. You can download the ZIP file from here.

Step 2: The file you have downloaded will be named ‘cinject_0.4.3.zip’. Open that file up and extract the ‘cinject_0.4.3′ folder from within.

Step 3: Once the internal contents of the compressed file have been extracted, place them into a location on your computer, i.e. the desktop or the system’s C: drive.

Step 4: Connect your iPhone 4S or iPad 2 to the computer using the USB cable.

Step 5: After you have found a suitable location for the ‘cinject_0.4.3‘ folder, go to Start > and use the search function to search for Run then select it.

Step 6: A Run prompt will appear, in the box type in ‘cmd.exe‘ which will open up an instance of command prompt on your desktop.

Step 7: You will now need to change directory to the location of the ‘cinject_0.4.3‘ folder. For example, if you placed the folder onto your desktop then you would type the command ‘cd Desktop/cinject_0.4.3′ to get into that directory.

Step 8: The next stage is where the fun begins. Executing the command line interface tool and letting it work its magic. In the command prompt you will need to type ‘cinject –i payloads/jailbreak.mobileconfig’. On your device you will see a screen as shown below, tap on Install, just tap Next when it asks for a VPN password and then tap on Done.

Step 9: After the mobileconfig file has been run, the next step is to execute the payload. You do this by typing ‘cinject.exe -j payloads‘ which jailbreaks the device and points it in the direction of the required payloads.

Step 10: The penultimate step is run the ‘cinject.exe -w‘ command which watches the system log.

Step 11: Now on your iPhone 4S or iPad 2, go into Settings > General > Network, scroll down and go into VPN and toggle it ON. You should see ‘A configuration error occurred’ message, dismiss it by pressing OK. Let it do its thing, don’t be alarmed, at this point you’ll see an Apple logo on the screen and your device will reboot.

Step 11: After the above processes have completed, your device will have an ‘Absinthe’ icon, which looks just like any other application. Tap this icon and the jailbreak process will be completed. Some users are seeing the Cydia application directly after the ‘cinject.exe -w‘ command is executed so if that happens to you, you can then load Cydia right away.

Then Done...hihi...



This post has been edited by FADIL FLHR: Jan 22 2012, 02:29 AM

is it normal if my ipad 2 "Erase All Content And Settings" take very very long?

wohooo.finally i can jb my ipad 2. just to share my happiness with everyone out here. guess everyone is very happy for this early CNY gift. for chinese..^^ wohooo

how many GB u ipad????
Got a lot games n app???

thx bro...im done jb edy

ya.. mine almost full for my 16GB ipad..

U welcome...just want share important thing...hihi...