he already tell me tmr 10am take car...but i say i got work..so he say at nite can take...7pm -8 pm like... he better keeps his promise...one more chance for him
Hrm,i was recalling my 1st new car back in those days...ahah...Many many many excuses..But since he promised that u can take the car tomorrow might as well wait for another day.....but if really tomorrow cant get,go and lodge an official complain to their upper management..if still cannot,lodge to MY BEST FRIEND the Syed Zainal Abidin to get things done..As far as my knowledge,persona have plenty of ample stock and the waiting list is not that long so there arent any reason for a long waiting but of course provided ur loan and all the necessary things had been done la..
Did any1 of u face issue with your fan belt tensioner bearing? Mine is making noise after just 8000km. Any suggestions as I have gone to d SC but they just service it only. Do they change or just take out and sand paper it only (as wat i observe at d SC). They SC told me that this part is not listed for them to change. They can only try their best to service it. The mechanic is even better...told me that d noise is normal as there is high content of silicon in the belt. Really need some advice from you experts here. TQ
I'm not sure is urs the same as mine.But mine says its an Auto tensioner if i remembered correctly..Its a round thingy with and its silver(most of the parts la)...And when u turn on the air-con,there is some sort of sound coming out..
If thats the one,go and get it replace as i have replaced mine even without complaining...
Added on May 31, 2011, 4:54 pm
QUOTE(xandras @ May 31 2011, 04:01 PM)
Yup. Part time eat maggi n die job (kumon). This august full time lo.. Now psychology masters.. Ok.
I see u having GOOD BUSINESS..haha..so wats left in ur car??of course other than ur CAMPRO IAFM engine..
This post has been edited by cho_petpet: May 31 2011, 04:54 PM
Sin Sian Hin S.jaya..Its an authorise dealer for proton..anyways i am not so sure hows their service to non buyer from that outlet..myself i purchased in that outlet therefore thumbs up for their quality service..In fact i wanted them to check something else that day and if its faulty i will ask them to replace..End up when opening my hood,he told me there is problem at the auto tensioner and end up changing that for me..haha..
no need to die war la...if tmr i go n cant get my car...i will jz tell d upper line at d proton there n report my prob...i dun even feel like wanna argue wif d SA already...it will only make me more geram if he gives me more excuses...
One more thing i would liketo highlight to u ...As for my previous statement i told u that they have ample stock on persona rite..i doubt mayb ur car is out already,maybe over some reason they cant deliver the car to u..(ermm..touchwood la..maybe got dented or watsoever or worse accident) which makes him delay to deliver ur car..)..but one thing for sure..make sure u check every inch and function of ur vehichle b4 signing the collection form..U still can argue if u yet to sign the COLLECTION FORM Vehichle....
Added on May 31, 2011, 6:45 pm
QUOTE(ckdenion @ May 31 2011, 06:36 PM)
did u read 1st post from 1st page?
Unrecommended SC (TRY TO AVOID AT ALL COST!)
1) Sin Siang Hin sdn. bhd. at genting klang n gombak - bad service and they whack ur car like they pay for petrol
edit: did c S.jaya...paiseh
...anyways,since its being posted in the 1st page but diff branch la so i dare not to recommend to forumers ere...but for me it works well due i purchase there..most of the complains and parts change is being done there other than the power steering thingy...the rest all ok..no problem at all..
This post has been edited by cho_petpet: May 31 2011, 06:45 PM
uh...congrats congrats...so anything else more to selll?butt maybe??haha..
VCCY..after install tell us wats ur review on this LCP...BTW,urs is manual or auto??
Added on May 31, 2011, 8:40 pm
QUOTE(xandras @ May 31 2011, 08:26 PM)
How's the rim man? OK?
no more things left for me??sigh,i am looking for budgetted upgrade..no doubt ur upgrades are quality ones but no $$ la......if i were to buy,the only affordable thing to buy is ur USED WORKS engineering filter...LOLS...hihih...wei,got cheap cheap thing to sell anot??
This post has been edited by cho_petpet: May 31 2011, 08:40 PM
Another review of the open pod filter. Our persona heat is actually come from btm of the air filter box. After i remove all the heat comes up. Hot until can fry egg.
Still dono wan to continue with open pod or not. LOL
Here is my temporary Heat shield. Hope it won burnt
LOLS..CUTE-NYA..!!! ...seriously u suggest if u wanna do the CAI or heatshield do it the right way la...Hard to say whether it will burn anot la due inside the engine bay is so dame hot!!!
$20 ok wat..MINE ONLY $10 LEH... ..haha..but my car is the 1st batch wan la...KORKOR of all PE..Uh..Maybe upgraded to GrandFather of PE lioa..whakakkaka
ya wor..... was travelling at 190km/h just now.... then suddenly saw a car like honday accord coming fast from behind max step pedal verooommm vrooommmmm till 220km/h max... dunno la but i can see it nearly flying from the behind.... haha....
@xan..... yeahh.... i wish there is a turtle on the road too just now... hehe
If there is a turtle,not only the SAGA FL...U also travelling at highspeed leh..By now we should be having sessions collecting "PAK KUM"....drive slower la babe...u still have a lovely GF to look after leh..!!!
This post has been edited by cho_petpet: Jun 3 2011, 04:26 PM
ur one oso can go 220 nw?i think i wanna change my drop in filter to works ones..maybe filter oso got different lo..and maybe can exchange the ecu wit u lo b4 u sell the car since ur ecu mapping more powerful lo
Another SAFETY DRIVER we are looking at!!! ...Those days i mostly speed 180km/h until rev cut all the way PLUS Hway..now max i think will reach 160km/h....maybe OLD lioa gua...INGATLAH ORG YG TERSAYANG....
Not my fault aa... Hammie no tell me also I wont realise.. Neh... U noe the white liquid u shoot when u're excited... I swear I didn't wanna know that...
Aiks...how come they add it as CUM STAIN???air barli or KOK STAIN sounds more relevent le... .
All the short terms u all mentioning i hardly can catch up la...OUTDATED lioa le..
Added on June 3, 2011, 5:04 pm
QUOTE(xandras @ Jun 3 2011, 05:00 PM)
Sure whoever bought that wira regret it...
Hahaha...but look at the bright side..u get FREE bigger roaches and lizards in the car...buy car FREE pets..!!!LOLS..
I think u should do dat to ur PE since u are selling it la..can get greater value....If u feel don like doing it,u will alwis have us..one member one shot can banjir ur car d...whakkakakaakakak
This post has been edited by cho_petpet: Jun 3 2011, 05:04 PM
Stilll remember i got complain about just after cranking successful and engines stalls off soon after that prob??..
Well,many suggested it is the crank sensor problem..Finally i got it replace but to my surprise,the REpl one is made in China.. ..where the one fitted in my car was made from germany.. ..makes any diff ka??anyways,soon after they install it i felt the power loss tremendiously and seems got lttle bit of loose thing near the passenger side..wat might be the problem??
Yeah happens before.. Sometimes the airbag short circuit and pop out.. No money ady loh.. Now is eat ibumie and save up first.. XD Can.. use L,2,3,D and change gear.. Always rev till meter habis (not redline only) I bring spike stripes.. and bull bar.. Then i come ram u off like the last car in this trailer..
Better go buy outside.. Those insulflex is the best lah.. Good heat and noise reduction.. Erm this one sound dampening only.. Does it reduce heat transmittance from outside? Best use Ziex 912.. Tested to be super quiet.. yeap.. Last thurs evening ady ship out.. Shd be arriving tmr or day after tmr.. XD Hmmm very general leh.. Need to come for TT then only we can hear whats the sound.. Is it coming from the passenger door or what? Now made in china quality also quite good.. I also not sure y they change leh.. Mb a lot of probs from the germany supplier..
And according to the manager there,the germany is meant for VDO and this china one is for continental.. ...and also i notice it stated clearly for the "made in germany" one got the stamped with VDO..Will it make a diff if conti ECU (if i remember correctly)by using VDO crank sensor or vice versa??
But seriously,performance drop alot..anyways,will a crank sensor affect the car performance??its just a sensor and its just plug and play...no memory inside watsoever rite??...
@xandras: d technician/foreman came n inspect my car today...say 1st time c dis case... he opened my engine cover....d 4 pistons bcome vry teruk...one already burnt...d other 2 pistons in d middle forgot wad he say...then d 4th one is covered wif black oil...n d electronic circuit within d engine also burnt...open up d engine cover is all leaked engine oil...
Wahlau eh...reli bad luck leh...after waited for so long then this lemon car came..any solution??they gonna change the the whole engine or wat?
I strongly thing u ask them to change the engine..if not at least the head and piston...did u manage to ask them wats is the problem which case the piston and the rest to burn??
This post has been edited by cho_petpet: Jun 6 2011, 09:37 PM
tmr they will tow to the proton in cheras...1st option is to ask them to change a new car...2nd option in case they dun wan to take responsibility is repair n claim insurance...dis is wad d technician said dis afternun...everything hv to wait until they check 1st...
Dont take option 2 as an option...so dat in ur mind u just have one clear option which is to change the dame engine!!!...screw them up.