What happen?

Speaking of which, the other day when I was on the highway coming back from Penang, I played with many cars.

1st was a City, I was behind him at 150-160 KM/h he just wouldn't move to the slow lane. I guess the City reached its top speed? 20-30 KMs later he finally moved to the slow lane, I accelerate to 190 & he's out of sight.

2nd was a Vios, I was on the fast lane.. Also around 150-160 KM/h. Vios keep tailgating me, then I lift my feet off the accelerator to slow down to 140-130.. Cucuk cucuk cucuk.. Then I tekan. 200 KM/h. Adios amigos.

3rd was a Wira. Same case like City, wouldn't move from fast lane. High-beamed the fark out of him, & he tekan all the way. He tekan I also tekan lor.. Reach 170 he's struggling already, I go into the middle lane, slowly 'cruise' past him.. Then tekan. Astalavista babeh.

BLM top speed can reach 180km/h if downhill. never face BLM but face waja 2005 version, 160-180 cucuk waja bontot then speed 190 waja seem cannot go further. then pass him..

Waja damn kotak mah.. No aerodynamics

vios and wira i tried b4..suddenly i feel my PE was very powerful when test wit vios and wira(got rear disc brake,should 1.6,tekan sampai asap hitam keluar..hahaha)..i never tried wit new city,but was tested wit previous version city ivtec,from 120-160 keep cucuk me..then push to 190 wit half throttle direct smoke him..hehe..

So can i do the same with denso sparkplug only?

At least get an air filter lah

well if waja cucuk me i can negotiate, last time got viva cucuk me at speed 140km/h Look's like ah-beng viva with full bodykit, then tekan 160 also he can't chase me

Was cruising at normal speed, 100-120km/h then suddenly the civic in front jam brake coz after the turn sudden traffic jam..
His tyres all smoky..i need to jam brake also la..
So my turn to get all smoky..wanna turn to midlane but then got motorist...so i turn back in..
If not that motorist sure gone case.

Moral of the story: My tyre botak...at least 3mm of rubber gone

Viva ada hati mah.. Viva I duwan play lah.. Later make me feel like big bully small..

Ur persona not H line meh? Tyre lock?

Moral of the story: Change brake pads. Come join the bulk order.. XD

Ok.. b4 i go i swap filter with you can arr? then when i come back i swap back with you..
or else later all those car you smoked, come cucuk me, smoke me leh...you know la i add sticker on my tail light d..
later kena smoked PPLYNC very no face one...

U can have Zeng's one.. He now no money pump petrol, so should drive slow.. Ask him to pinjam u for 1 week since he driving so slow not fully utilising the air filter..

tested blm manual b4..from seremban to tangkak toll..car load wit 5 people..can go to 180-190 all d way..auto one tested oso..can go to 180..

---

Added on May 1, 2011, 12:59 pmi think our ori PE can tapau old city vtec and vios and wira lo.bcoz i beated them wit my stock car lo..b4 modify

This post has been edited by samwongjyhhorng: May 1 2011, 01:03 PM

Rapid Stop 550'C Brake Pads. Front only, RM 130. For H-Line owners with rear disc brakes, if you want the rear brake pads as well I'll have to ask for a different quotation from the dealer. For now the bulk is for front brake pads only.



Pros of RS:
1. Higher working temp.
2. Doesn't need to warm up first every time u start ur car to provide immense braking power.
3. Less fading, lasts longer.
4. Less brake dust than OEM pads.
5. Price.

Cons of RS:
1. Needs bedding in.
2. Not so well known like MKT.
3. Can be spongy if not bed in correctly.

FREQUENTLY ASKED QUESTIONS:

Q. Are the brake pads good enough for my fast & furious driving characteristics?
A. Yes, definitely more than good enough as these are high temperature brake pads. As long as it's bedded in correctly, it will work better than most pads of the same price.

Q. What's bedding in?
A. Bedding in, or burnishing in, is an important process that must be carried out in order to ensure that the brake pad compound can properly mate with the rotor surface. If done correctly, it creates a nice, even, transfer film of pad compound on the rotor surface.

Q. Will it affect my warranty?
A. No, as the warranty for our cars does not cover wear and tear items such as brake pads and tyres.

Q. Is it better than other well known brake pads such as Bendix MKT & Ceramic Nao?
A. I can't say much here, but I've personally tried MKT on another car, it doesn't satisfy my braking needs. I haven't tried Ceramic Nao before though, so I can't comment much.


If possible, a TT will be held where buyers will be given their brake pads and will be taught on how to bed in the brake pads accordingly & evenly.

RM 130 only, need at least 10 members here to get bulk price. Might be able to get cheaper if more people join the bulk.

1. ZengTMM
2. K.Lee
3. onijoseph
4. RokXIII
5. pupumaru
6. fenrir0402
7. selangorclay
8. MjMax15
9. phythia79
10. oldskool AE
11. neo1024

ATTENTION TO ALL MEMBERS WHO JOINED THE BULK!!!

The bulk order will be left open till Tuesday, May 3rd @ 11:59 P.M.. As soon as the order is closed, members will be required to bank in the FULL AMOUNT (RM130) into a Maybank account. Of course, if you would like to bank in earlier, you are welcomed to do so as this will speed up the ordering process if there are 5 or more people who pay for the brake pads in advance.

So far 1 member has already paid the full amount for the brake pads, I will need at least another 4 members to pay up front the full amount to make the order.

PLEASE TAKE NOTE OF THIS and try not to delay the payment as to not consequently delay the delivery of the brake pads.

Thank you.

The names that are striked out are those who have already paid the full amount for the brake pads.

Mine is M-line nia..sure tyre lock la..
My leg cannot do manual ABS
Already on Bendix pad...if Ori pads sure gg-ed..

Bendix MKT? Not good enough lah... Some ppl already complain. Yesterday lkc185 also said, the MKT new that time good brake force, but after a while soften d..

Manual ABS I do that all the time. When the tyre lock, try release then brake again. Damn syok I tell u the kick. XD

i wont play wit viva lo..no meaning lo as i tested b4,waja can go 180 wit half throttle onli..but even u finish press,the speed oso wont increase..maybe speed cut my PE oso lo tats why my PE was not powerful lo..

---

Added on May 1, 2011, 1:04 pmbut in city,our PE cant match wit the waja wit mitsubishi engine..the low end torque reali good..

This post has been edited by samwongjyhhorng: May 1 2011, 01:04 PM

After being kissed by viva before, i always give way to vivas on the road

is the bedding in most of the foreman also know how to do?
im worry that after fix in the brake pad duno how to bedding in. =.=

Who say? My friend's Waja mitsu engine with exhaust mods also I tapau mah...

---

Added on May 1, 2011, 1:09 pm Jam brake oni everytime a viva comes near. Then ask them to pay. In case of emergency brake they sure bang u then total loss wan

...forbidden84, bedding in is done by urself, not the foreman. I will explain more about it when u collect ur brake pads, so do not worry about it.

Also, for those who wants to try the RS pads' braking force can try drive my car. But try not to E-brake till tyre lock lah. My tyre expensive leh, and I've got no money to change now

---

Added on May 1, 2011, 1:10 pmforbidden84, ur name is not in the bulk order list. Did u wanted to join earlier?

This post has been edited by xandras: May 1 2011, 01:10 PM