Around that speed too. Maybe new batch cut cost kot

I got the persona also Becoz of the good reviews... Good luck la proton... Yes bro it's hi line

---

Added on May 1, 2011, 6:04 pmGuys what reams and tyre size to get for 16" ream? Any recommendations? The stock tyre not good for cornering.

Damn the malacca jam. So many traffic lights

Must otak otak. Best!

sam tapao otak for me. Damn long never eat sia. Also the durian dodol.

Sure can lah.. Whole mth of may im jobless.. So can probably join u for mascoting.. hehe.
U sell me cheap cheap i will buy loh.. 
YES!
I want leh.. But time not ngam.. But since only 2 hours then i can ponteng for 2 hours la..
Then my FC also increase kaw kaw leh.. The other day i pinjam my housemate my filter for his BLM.. Then i use back the OEM one.. Difference felt was huge.. The car like after 3k rpm cant accelerate any further..
Beogatts also got 2 PE in his house. One his one, one gf one.
Ouch.. Damn.. Going to try ibumie soon.
U try to open ur airduct and touch ur throttle body and see.. If the side is very black then its cos of poor filtration lah..
Can.. My car only 80km on odo also i go  test top speed here ady loh..

Rapid Stop 550'C Brake Pads. Front only, RM 130. For H-Line owners with rear disc brakes, if you want the rear brake pads as well I'll have to ask for a different quotation from the dealer. For now the bulk is for front brake pads only.



Pros of RS:
1. Higher working temp.
2. Doesn't need to warm up first every time u start ur car to provide immense braking power.
3. Less fading, lasts longer.
4. Less brake dust than OEM pads.
5. Price.

Cons of RS:
1. Needs bedding in.
2. Not so well known like MKT.
3. Can be spongy if not bed in correctly.

FREQUENTLY ASKED QUESTIONS:

Q. Are the brake pads good enough for my fast & furious driving characteristics?
A. Yes, definitely more than good enough as these are high temperature brake pads. As long as it's bedded in correctly, it will work better than most pads of the same price.

Q. What's bedding in?
A. Bedding in, or burnishing in, is an important process that must be carried out in order to ensure that the brake pad compound can properly mate with the rotor surface. If done correctly, it creates a nice, even, transfer film of pad compound on the rotor surface.

Q. Will it affect my warranty?
A. No, as the warranty for our cars does not cover wear and tear items such as brake pads and tyres.

Q. Is it better than other well known brake pads such as Bendix MKT & Ceramic Nao?
A. I can't say much here, but I've personally tried MKT on another car, it doesn't satisfy my braking needs. I haven't tried Ceramic Nao before though, so I can't comment much.


If possible, a TT will be held where buyers will be given their brake pads and will be taught on how to bed in the brake pads accordingly & evenly.

RM 130 only, need at least 10 members here to get bulk price. Might be able to get cheaper if more people join the bulk.

1. ZengTMM
2. K.Lee
3. onijoseph
4. RokXIII
5. pupumaru
6. fenrir0402
7. selangorclay
8. MjMax15
9. phythia79
10. oldskool AE
11. neo1024

ATTENTION TO ALL MEMBERS WHO JOINED THE BULK!!!

The bulk order will be left open till Tuesday, May 3rd @ 11:59 P.M.. As soon as the order is closed, members will be required to bank in the FULL AMOUNT (RM130) into a Maybank account. Of course, if you would like to bank in earlier, you are welcomed to do so as this will speed up the ordering process if there are 5 or more people who pay for the brake pads in advance.

So far 1 member has already paid the full amount for the brake pads, I will need at least another 4 members to pay up front the full amount to make the order.

PLEASE TAKE NOTE OF THIS and try not to delay the payment as to not consequently delay the delivery of the brake pads.

Thank you.

The names that are striked out are those who have already paid the full amount for the brake pads.
Ya loh... Beh tahan the noise mah... Now my car slower than kancil 660 ex liao...
Zeng, last night I was running on Mobil 95

felt very stable when you drive the car into a corner... stock rims dont feel as stable as yours

i have to device a financial plan to get an R3 as well... btw is your original or what?

felt very stable when you drive the car into a corner... stock rims dont feel as stable as yours

i have to device a financial plan to get an R3 as well... btw is your original or what?

xandras and i both have the same color

Gearbox power loss ~35 HP

---

Added on May 2, 2011, 3:00 pmSo assuming that the power loss is 35 HP...

My car stock standard = 75 HP.
With exhaust system = 87 HP.
With air filter = ~89 HP.
With Spark plugs = ~90 HP.
With some 'hidden' power = ~93 WHP.

93 + 35 lost transmission HP = 128 HP on engine

Of course.. these are all just rough estimates..

Say wan mod then mod meh.. What, change to manual ah? lols... Unless can source for a 4 speed gearbox that's compatible with our engine with less power loss la.. Otherwise there's nothing that can be done to recover the lost HP...

that;s very inefficient. is this the same (in general) with other auto GB? i know that auto trannies lose more torque and power compared to manual GB.. but at about 30% that's too much no?

I got no choice, thats why I chose AT Parents damn bising, I buy car but they bising. Regretted lor. If not now I'm having at least 110 WHP ad.

---

Added on May 2, 2011, 3:09 pm
Not that little lah sam. I've seen Lancer GT dyno before, on wheel 131 WHP. About 10-20 HP loss. But the thing is their engine makes much more HP than our PE.

2.0 CVT, 1.8 only manual.

---

Added on May 2, 2011, 3:20 pm
I don't think anyone would want our high power loss TC

Anyway, if we change the torque converter it doesnt involve the whole gearbox.

Hmmm.. Ok meet up with u that time will tell u then..
Nearly worthless.. High transmission lost, low torque tolerance..

Depends lah. If it can be custom made & done then I might consider it lah. Otherwise...

Wow, Zeng, the stock ady available ady???    when can take my stock, this sat early morning can??? meet u same place... took ady i staight go servic my car ady 
Wah, the ECU Re-flash really so great wor.... i also wan make appointment wif the SC ady 

---

Added on May 3, 2011, 8:25 pmMy Next Month MOD: thinking of changing the suspension and abosorber 

http://www.mudah.my/Gab+SUPERSPORT+SOFTHAR...NEO-8143794.htm

ANy Suggestion?? SHould I or should not?? 

Hmmm.. you can go to CARs International..
They got one service to remove smell and bacteria..
It will cost RM 28.80 including normal car wash and vacuum..

They will put one equipment inside your car..
The process just takes only 10minutes-15minutes..
That equipment will spray something into your car while your aircond is on with the door closed
It manage to remove the smell from the aircond.. 

Xandras , i wanna join ur pplync, my car is h-line, brilliant red

FYi , poison = upgrade = performance = bankrap ... welcome to the club ...

feel uneasy with my car's pickup...this recent the engine like "dont want to go" ... especially when gear no.3 tarik also feel like "lekat lekat" (i use manual)...don't know what else to upgrade... sifu xandras , zeng ... any idea ? will it coz of the vs ?? im using 2 vs, guang dao and hot inazma... will this bring problem ? 

i have hotbit extractor ad... filter also ... plug also ...  wasnt that day u said u feel like not the power after install the powerzone extrator... now ok ad ? how u do it ? 
i want to change the middle part and muffler , but i dont want the exhaust tone become noisy...  

now 42k ad... but plan to change the oil and oil filter very soon...want to try the castrol magnatec ... 
normally u guy send to sc for services, u will waited there and see how they do the work ? just now my gf said 1 of the perodua sc always put old lubricant oil for customer, of coz , it's when the customer not around... haiz...i normally left my car at sc early morning, and collect at evening...i start worry now...

---

Added on May 4, 2011, 12:20 pm
how bout when u tarik ? mine extrator have some "metal noise" when gear 1 pick up & when the meter is over 140km ...