OMG... just read about "bed-in" sounds like a tough process eh

hey guys

check this out.... hope our batches will be included in this lifetime warantty for power windows

http://paultan.org/2011/04/24/proton-md-po...time-guarantee/

By vacuum meter, u mean air compressor? That thing is pretty useful to adjust the car's idling rpm.. But volt meter.. I really don't see the point

I only install voltmeter to check my battery health.
Vacuum meter usually ppl use to see whether got air leaking in or out of their engine so can determine worn gasket or valve. ppl always high rev their engine like in racing used this as their component worn out faster. Leaky give power lost and incresed fc.
Hmm. Don like these like for persona el. later our persona lost their 'elegance'. more like gen-2 wannabe

The H3,H4,H7 and all that are light bulb sizes. Different cars got different sizes..

Not H3 meh? the other day I saw one PE at accessories shop installing H3 HID wor..
Cannot watch la..

=.="""
V15 page 81

---

Added on April 25, 2011, 9:06 amAlignment n balancing SC charge how much? Can go outside workshop?
My PE Alignment lari Liao.

Yeah I installed them myself. The cable sockets can buy at electrical shop, but you need a clamping tools to "kepit" the socket. 

A lot of subang kaki mah, jackyap84, jhbey, cho_petpet, muslayer all there one..

Buy only.. later ur persona high fc and slowpoke then not nice loh.. Buy ady sure no regret. 
LOL Fenrir.. I thought u were clobbered to death by a penang driver using a steering lock!! haha.. The starting problem all u need to bring to the SC to diagnose.. A lot of possibilities.. Probably u need Denso iridium plugs that im bulking now..  Best lube u can use at the moment is Castrol Magnatec..
Ppl scared xan fly 747 means ffk lah..

RM 130 for front brake pads.. And yes, both left & right wheels..

Ha? I already wrote the pros n cons of RS there.. Everything written there is in comparison with MKT lah..
ok lah.. He so rich.. Sell so many mee bags sure can afford wan la..

RS needs bedding in, but that's about it la.. Braking force better especially during high speed sudden braking, as the pads' have higher temp ratings n resistance..

Lol.. It's something like a run in for brake pads. Actually any brake pads also need to run in.. Just how long needed.. That's all.. For RS need to bed in longer than other pads..

Yeah..change the whole set....
wonder the old set can sell off to the metal junk yard..not sure it fetch wat $$..

Ok..to be confirm thats the swirl bullet..Yeah my S-Flow box is kinda huge compare to my stock one.
Now I wanna concern over my fuel..Previous setup was the swirl bullet was not in-place..
Added the swirl bullet since last week Wednesday.

---

Added on April 25, 2011, 10:18 pm
Only the header running on Hotbits. the rest just cap ayam lor.

---

Added on April 25, 2011, 10:18 pm
Only the header running on Hotbits. the rest just cap ayam lor.

Ok..to be confirm thats the swirl bullet..Yeah my S-Flow box is kinda huge compare to my stock one.
Now I wanna concern over my fuel..Previous setup was the swirl bullet was not in-place..
Added the swirl bullet since last week Wednesday.

---

Added on April 25, 2011, 10:18 pm
Only the header running on Hotbits. the rest just cap ayam lor.

---

Added on April 25, 2011, 10:18 pm
Only the header running on Hotbits. the rest just cap ayam lor.

---

Added on April 25, 2011, 10:22 pm
Improvement surely has. Piping size 2 inch lor. Setup 4-2-1 hotbits.
Mod many stuffs already..felt improvement on torque..top speed only hit 160 then I drop off the acceleration pedal.
Using LCP and ACP as well. Now thinking wanna bot or not..only afraid engine cannot last long..

U heard who said that? Any extractor, as long as it's piping diameter & length is properly tuned will match our PEs perfectly. Thats one reason to avoid cap ayam extractors because they are not tailored to match our car's output.

And our optimum piping size is 1.7". Go max no use, waste petrol lose top speed n acceleration only.

i'm not sure..but i can confirm is powerzone one more thick than hotbits one..tats why hotbits will improve pick up much than powerzone

If u dont wanna step backward, then go forward lah. Go ahead & turbocharge ur car, install injector kit, increase the displacement, etc.. But that will surely cost u a bomb, no?

The ECU cannot be tuned to provide u with less FC or more power/etc if ur piping's diameter is already huge. And if u were to remap ur ECU to give u good FC, expect to experience driving a Persona with Kancil's engine.

no lo..the highest top speed is xandras car

Cool. Then I will do it at workshop near my house.
What about alignment? Had u done alignment outside? How much?

Ya i realised that too.. And i always off the aircon blower and compressor off first.. Then only switch off the engine.. It will like keep on spinning for 1-2secs b4 stopping..
LOL.. Make sure ur keys are not in the car.. Cos once u connect back the battery it will lock by itself.. And also take off the negative (red) terminal.. Keep the black one connected as it acts as a grounding.. When plugging back the -ve terminal keep ur remote handy as the alarm will start blaring the moment u connect it back.

Nope.. It's the fan.. Just try to wait till the fan switch off.. Then oni u off ur engine..Because it's designed to run for like 10 secs on every 10 secs interval. U understand what I'm saying?

Run for 10 secs -> Off for 10 secs -> Run again for 10 secs -> Off for 10 secs.

---

Added on April 26, 2011, 11:13 pm
All persona stock player got this prob lah.. Mine aftermarket HU..
Ha? Ur alarm there got button right? Press the big one loh when the alarm comes on..