http://www.brightstarcorp.com.my/

click on service -> motorola

don't see any in Kota Kinabalu though

Mine i set

20/300
38/600
57/1000

Tried 52/1000, my phone straight away crashed and rebooted and entered a boot-loop since i enabled 'set on boot'. Removed my memory card and somehow the settings got reset so lucky for me there. Note to self: Next time when playing around with new OC adjustments, disable the 'apply on boot'

at 55/1000 it was unstable, at 56/1000 it was stable most of the times but occasional reboots. at 57/1000 it was stable and so far no reboots yet

and btw, Beta 6 is out!

http://forum.xda-developers.com/showthread.php?t=1033654

Bugs said to be fixed:

Auto-brightness level transition alot smoother and quicker like the original motorola firmware's auto-level transition
-Mic when running on speakerphone fixed (reported by forumer, still there in the bug list on the first post.)
-LED Blinks when charging (like other Android phones. Apparently Motorola is the only company that disables LED when charging)
-Battery drain issue might be fixed (didn't encounter this in beta 5.1 so no idea what does this do)
-Wifi said to be more stable than beta 5

problems reported:
- CPU usage flies to 90% if you DISABLE auto-brightness
- some reported battery drain is higher instead

anyway, downloading now while i sleep. tomorrow wake up and flash

The defy should be the perfect phone phone you. Water resistant and can survive a submersion provided all the ports and covers are closed properly. And the phone don't actually look rugged at all unless you tell people it is

Battery life depends on your usage really. But with a 1530mah battery, it's considered one of the largest battery in an android device

about motoblur, it's not supported outside the USA so you don't need to register for the service. But the motoblur widgets are still there though but just install a 3rd party launcher like launcherpro or something then you're good to go

Go search phone shops for those universal phone chargers. Should cos you around 20 bucks I guess.

Same like pc overclocking I guess. Different units have different performance characteristics. And CM7 beta 6 is considered 99% working already so you can use it as your everyday rom no problem.

if you have a voltmeter, check the voltage of the battery if its at least above 3.8v. a fully charged li-ion battery should be at 4.1~4.2v

and you sure you used the same USB port as you used to flash last time? Else, try reinstalling your USB drivers. Instead of flashing the Nordic, try flashing a full SBF like this

http://depositfiles.com/en/files/tjnmh6d98

make sure you clear the cache after you flash though.

wish you luck in recovering your phone

Make sure you're using 2nd init version 1.4. Wasted 3 hours yesterday stuck at installing cm7 then i found out that there seems to be a problem while installing using the latest 1.6

pick one lol

http://www.multiupload.com/XVIX9DYCQP

install zip from sd card, then browse to where you dumped the beta 6 file then after that do the same to the gapps file.

installation of beta 6 is super fast, like 5~10 seconds. after installing that and the gapps and reboot, the phone gets stuck at the white motorola screen.

after that, i tried using 2nd init version 1.4 instead and installation of beta 6 took around 20~30s i think and after reboot the cm7 logo came up and it ran smoothly

beta 6 already have a camcorder lol.

This post has been edited by Nightstalker1993: May 15 2011, 05:02 PM

try clearing the dalvik cache in the boot menu(press vol down + power, when the greed droid comes up, press both vol up and down together)

my camcorder works fine though so don't really need that

btw, to those running on CM7, heres a quick tip. Go to DSPManager(in your app list) -> headset -> Bass Boost ON and set strength to moderate.

enjoy

you flashed the 2.51 or 3.4.3?

if you flashed the 3.4.3, you enter recovery mode by pressing vol up and down together, if you flashed the 2.51, you enter recover mode by pressing the left bottom(or right bottom, can't remember) of the screen with your finger

btw, leaving for NS tomorrow, won't be seeing you guys for 3 months after today

just flash to cm7 again. flash the 3.4.3 full sbf and make sure you wipe data/cache before and after flash same as before else you might be stuck at the blur logo again. after that root and install 2nd init version 1.4(latest version sucks) then load the cm7.zip and gapps.zip, wipe data and cache again, reboot, voilla!

i prefer SwiftKey