how long? first boot should be abit longer. But I thought to flash cm7/miui you have to set 2init boot to default?

download the nordic sbf and flash, since that is the supposedly best base SBF for it. start from there!

i also few time fall in that "stuck in MoTo logo" already,

after some read n try, i found my solution fix it.

u can try start in recovery  ( Vol Down+ Power) , then got that ! triangle, press both Vol Up+Down
then choose wipe data/factory reset.

and as for me, i got trouble when not  using 2nd init 1.4
so all my ROm so far boot from 2nd init 1.4, trouble free.

---

Added on June 14, 2011, 4:30 pm

Can agree anymore bro..

the main thing is, learning experience. once you know how to do it, then you will be able to do it anytime easily. i mean, if you dont want to, might as well get an iphone.

emm.. not yet bro.. try flash stock SEA 15 ROM and then go recovery, wipe data, cache and try again..

---

Added on June 14, 2011, 5:40 pm

amybe an old Nokia wil do..
no blank screen, no hang also.. 

come on.. just try again.

why do you mount and stuffs? i never did any of those. what i did what install 2nd init, reboot, then once the blue led comes on, press vol down, set 2nd init boot as default, then reboot, then blue led again, press volume down, custom recovery, and install zip

can you still flash your phone with RSD lite, and start up the phone fully first?

lol..

thats quite sometime..

anyway, bfore sending there,
better flashed to SEA 15 ROM 1st la..

owh shit..
i forgot to wipe data/reset before flashed nordic..
no wonder wait soo long

dude, i see this screen many many times before...when i bricked my phone and had sifu Lingch helped me out. you always stopped at PLEASE MANUALLY REBOOT right? last time i had the problem, is because i tried to flash a fixed sbf rom, instead of a full sbf, but the fixed sbf i flashed was a 2.2, and i was on 2.1

went to endless bootloop everytime i wanted to flash it (just like in your case now), until i had to download a full 2.2 sbf to flash. however, in your case, i'm not sure how to use the latest sbf, since you are already flashing it. you must actually get an OK first, before unplugging it out.

---

Added on June 14, 2011, 8:49 pmanother thing, what version of RSD Lite are you using?

take from here..

http://forum.xda-developers.com/showthread.php?t=1093352

i think Nordic should work, if it's a full sbf. what version of RSD lite? last time i used 4.8 and encountered the same problem, but used 4.9 no issues

lol..

my Nordic is Full 360 MB

haha, then better download the fuller one...and at least it's assure it's a FULL sbf

---

Added on June 14, 2011, 10:00 pmi did a check...a motoblur sbf which is used, i think was Norwegian or something like that is 369MB, while the UK blurless 3.4.3-11 was 169MB. not sure if it's any difference, but the 3.4.3-11 was the base sbf that i used to flash LiquirdArc, and that was the last time i flash using RDS Lite. after that was smooth sailing with CM7 (2nd Init) all the way...

This is one of the reason to have a spare battery

use the Macguyver method if you are already low on battery. if not, pull out the battery first until your download is complete.

use this method dude....i used it when i screwed up like you as well....

http://forum.xda-developers.com/showthread.php?t=892026

use this method dude....i used it when i screwed up like you as well....

http://forum.xda-developers.com/showthread.php?t=892026

there are 4 holes at your battery. what i did what uncover the wires, then put it in the battery first, before slotting in the phone. use a tape to secure your wire cable to the battery as well.

good luck macgyver!

---

Added on June 15, 2011, 11:18 ambtw, you got no cheap mouse or some usb cable? i used a spoilt mouse for it....

now you can rank yourself as sifu since you already went thru so many problems. those that follow and no issue somehow dont get to learn so much!!