hi guys , i need help on OC my pentium D 805
since ppl told me my proc is holding back my GC so i decided to oc
this is my rig setup
pentium D 805 @ 2.66ghz
msi 945PL neo
apacer 512MB ddr2 533mhz X2
galaxy 7900GS
coolermaster extreme power 430watt

i went bios to look for several settings, i can see ram steppings, i can see fsb, but i couldn't find where to change vcore for proc and multiplier

hope you guys can help me,thx

haha....changed my hsf already,currently using noctua
psu not enough juice ah? so far i'm running 1 hdd, 1 dvd rom, 1 dvd burner

ps: i thought mine is 805? its 820 ka?

hmm,before changing my psu, got few questions, i suspect my bios lock certain features
cause i couldn't find multiplier settings and i can view but can't change my vcore

few more noob questions wanna ask
where to change fsb:dram ratio?
and i found out something, my proc vcore is not stable, it keeps changing (observed in cpu-z)

edit: read some reviews, it says multiplier for 805D is locked at 20X now the thing i'm most curious is,why my bios doesn't have option for me to change vcore

This post has been edited by darude87: Jul 24 2007, 04:13 PM

planning to change board edi today tried to push at stock voltage, can't even break 3ghz barrier

i think u just pointed out another thing i couldn't reach on my mobo
yesterday i found this guide, has anyone tried it? i know it sounds crazy, but i bet there's did that
http://sg.vr-zone.com/?i=3931

no, that's the weirdest thing i'm facing, msi core centre also cannot change vcore, bios also can't change

sad,just found out, my board really locked vcore, there's no solution for it, sigh...
the only way i guess is changing board,really disappointed with MSI already

btw mine is 945pl

still noob in oc
tried to google after reading your post, don't know how to use the cpuclock utility
b4 this tried to use msi corecentre, it shows N/A there

edit: it shows both in grey for multiplier and vcore, i guess its really locked kao kao

This post has been edited by darude87: Jul 29 2007, 11:04 PM

targeting dfi infinity dark, but the price my whole pcfair salary also insufficient for it
somemore now got ppl doing bulk for E6750 and E6850, the price is too temping,duno which to go for 1st

i saw most of the overclockers will set their multiplier lower unless its locked (example : pentium D 805)

anyway, what kind of cooler you're using? if stock you better don't go further

sry to go a bit off topic
gigabyte got so many p35, the thing i'm concern which few has pci-e 2.0?

i need some advice
i'm using DFI blood iron, running E8400 at stock
i use several program to check the temp
at idle, everest shows 52c, but then smart guardian shows 29c only, and the 52c is chipset in smart guardian, real temp showing 48, so which 1 should i believe? cause if its really 52c then i think i gotta remount my hsf edi

remounted my hsf, thought its my mounting is the culprit

readings from realtemp, core 1 41c, core 2 39c at idle, my hsf noctua
using orthos to stress cpu now, cpu 1 52c, cpu 2 49, readings ok?

This post has been edited by darude87: Jun 8 2008, 01:14 PM

tuniq tx-2 , maybe my thermal paste put not nice or ventilation not good i guess :\
my room is small ,last time i can feel the heat from my pc

sorry, my question will go a bit off topic because i dun wan to open a new thread
my fren is using pentium 4 socket 775, 2x 1gb ddr2 800mhz, gigabyte ep-35 ds3, and zotac 9600GT amp!

apparently there are a few weird things on his pc

1st. His ram is running at 533 only, cpu is running at 3.0ghz with 133x23(which i think the 23 is locked)noob me, his proc is 533 fsb, thats why
2nd. his gc, core speed detected correctly, but memory speed only detected as 1750(using rivatuner, gpu-z couldn't start, no idea why)
3rd. no software can detect the accurate temperature for processor, was using speedfan but not sure how accurate is it(realtemp and coretemp not supported, everest not even showing cpu temp)


hope buddies here can help me

This post has been edited by darude87: Jun 15 2008, 01:36 AM