Outline ·
[ Standard ] ·
Linear+
INTEL OVERCLOCKING THREAD, TIPS,Q n A, Results...Great For NueBis
|
ciohbu
|
 May 12 2007, 01:32 AM
|
|
hi everyone, anyone here oc pentium d 2.66 b4?..mind to share ur oc result?...below is my pc spec..if i wish to oc to 3.0ghz..izzit possible?..the power suppy enough? coz i gonna 2 sata hardisk, 2 uv tiub , one aerogate II and one dvdrw, and also few fans
Pentium D 805 2.68ghz code name SmithField with Gigabyte G-Power
Gigabyte 81945PL-G with Intel i945G/GZ chipset with Thermaright HR-05
Corsair xms2 ddr2 675 512x2mb
ATI X1300 Pro 256MB with Zalman Fatal1ty FC-ZV9
Tagan TG420-U02 i-Xeye 420W
|
|
|
|
|
|
ciohbu
|
May 12 2007, 02:21 PM
|
|
|
QUOTE(AceCombat @ May 12 2007, 12:42 PM) yup,i used and oc'ed before i sold to forumer. *this fire dragon is hot enough!i used stock intel hsf to oc to 3.2 (forgot the setting already),i just remember it idle at 60c  the psu should be enough o support ur rig,. hehe..ya..this babe is hot..but now i change the stock hsf to gigabyte g power..ideal around +-40... now i am using clockgen to clock it to 2.8Ghz..without changing anything..just the cpu speed...izzit okie?..or do i need to adjust the pci also? |
|
|
|
|
|
ciohbu
|
May 14 2007, 05:57 PM
|
|
|
QUOTE(AceCombat @ May 14 2007, 05:46 PM) nope,no need,it's ok,but why dont u just use bios to oc? the temp is much improved after changed the stock hsf. hehe..coz i am stil new in OC..tats why wanna try it first with software...so u mean adjust vcore only in the bios?..and how do i know whether the psu is enough to support or not? |
|
|
|
|
|
ciohbu
|
May 16 2007, 02:58 PM
|
|
|
QUOTE(AceCombat @ May 16 2007, 12:01 PM) u can use the psu calculator to calculate ur rig estimated power consumption mah.... for me,software oc is kinda dangerous,it will boot any setting that u made without take care of ur pc,it just push and push,if u using bios,if it detect any dangerous setting,it will not boot or reset into ori setting,that's why it wont spoil ur hardwares. Bro,PD oc is kinda hot,beware ya! heeh..i see i see..mayb will try later..hmm..may i know can i increase the cpu speed by just increasing the fsb?without increasing the vcore..izzit possible?..coz increase vcore will cost more power consumption right? |
|
|
|
|
|
ciohbu
|
May 17 2007, 11:27 AM
|
|
|
QUOTE(AceCombat @ May 17 2007, 11:12 AM) yup,u can make it,but need to see ur cpu potential lo....some of them even can go skyrocketing with stock vcore. i see i see..thanx for the info |
|
|
|
|
|
ciohbu
|
Jan 2 2008, 10:09 PM
|
|
|
try change ur psu...power stability is important in OC...PD 805 can easily go over 3.4Ghz..if cooling gud then can reach 4G
Added on January 2, 2008, 10:10 pmQUOTE(decarusz @ Jan 2 2008, 10:08 PM) Which 1?  I got hard time finding topic about overclocked pentium d 805 .
Added on January 2, 2008, 10:09 pmU mean my power supply... How much watt does it need for a normal OCed system? change to a better one... This post has been edited by ciohbu: Jan 2 2008, 10:10 PM |
|
|
|
|
|
ciohbu
|
Jan 2 2008, 10:16 PM
|
|
|
QUOTE(decarusz @ Jan 2 2008, 10:13 PM) hm.. i triend before 3.3ghz.. full load only 44cc not really stable.. =.= what kind of psu i need?.. how much watt?..  hmm..go for tagan or silverstone or other better brand..wat brand u using now?.. |
|
|
|
|
|
ciohbu
|
Jan 2 2008, 10:18 PM
|
|
|
QUOTE(decarusz @ Jan 2 2008, 10:16 PM) Which means if i change PSU i can OC until kau kau?.. haha..of course no...for a stable oc...power supply is important..then only u can start oc from there..else u will fry all ur hardware.. |
|
|
|
|
|
ciohbu
|
Jan 2 2008, 10:37 PM
|
|
|
QUOTE(decarusz @ Jan 2 2008, 10:18 PM) erm.. Using power logic magnum 300 Comes with the Utopia 2000MX casing
Added on January 2, 2008, 10:20 pmu think Ram will affect my fsb performance ma? I see lots of ppl using 667 but they underclock till 664 or below that.. o.0? if the ram cant oc then mayb will..coz mayb u reach its limit..
Added on January 2, 2008, 10:38 pmlike bro xixo say..mayb u should refer to existing oc thread..jsut spend some time and do some research...hehe...no need to rush This post has been edited by ciohbu: Jan 2 2008, 10:38 PM |
|
|
|
|
|
ciohbu
|
Jun 28 2008, 11:09 PM
|
|
|
QUOTE(fishy21 @ Jun 28 2008, 01:56 PM) processor: Pentium D 2.0Ghz MB: Asus P5GC-MX possible to overclock it to 2.4GHz ? do i need water cooling for that increase? Please help.. thx P/s: Can anyone give tutorial about basic Pentium D OC? or show me where to find it ? 2.4 i think should be no problem..no need water cooling lar.. and to learn OC, u really hav to do some research and reading online...there are so many article out there .. happy learning ~~ |
|
|
|
|
Quote
0.0503sec
0.53
7 queries
GZIP Disabled