INTEL OVERCLOCKING THREAD, TIPS,Q n A, Results...Great For NueBis
|
|
 Feb 13 2006, 01:09 PM
Return to original view | Post
#41
|
 
Senior Member
4,081 posts Joined: Aug 2005   
|
QUOTE(Confession @ Feb 12 2006, 03:30 PM) Hi, i wish to overclock my Northwood 2.4ghz but i have zero experience in overclocking , can someone teach me how and wat to do to overclock my cpu ? Btw, i'm using Jetway PM9MSR2 s478 mobo VIA chipset. b4 u do any oc'n recommend u read d pinned thread first in order for u to noe wats u r doin... |
|
|
|
|
|
Feb 13 2006, 06:35 PM
Return to original view | Post
#42
|
|
Senior Member
4,081 posts Joined: Aug 2005
|
QUOTE I'm having this on stock cooling , when i set it to 163 then save to cmos after exit and then the monitor shut off , maybe not suitable huh ? try increase d vcore..i belief ur proc had hit d wall... to confirm this, u need to find d max speed ur ram can run first.. use memtest |
|
|
Feb 14 2006, 12:09 AM
Return to original view | Post
#43
|
|
Senior Member
4,081 posts Joined: Aug 2005
|
hmm... i dunno where it shud b for ur mobo...mayb u can see it in ur manual... if dun hav, that means ur vcore is locked...
|
|
|
Feb 19 2006, 03:33 PM
Return to original view | Post
#44
|
|
Senior Member
4,081 posts Joined: Aug 2005
|
QUOTE(Confession @ Feb 19 2006, 03:18 PM) From: u cant do this on stock vcore? To:  Is this good on stock cooling ?  btw..its too little..i mean d speed |
|
|
Apr 21 2006, 02:54 AM
Return to original view | Post
#45
|
|
Senior Member
4,081 posts Joined: Aug 2005
|
QUOTE(siauann @ Apr 20 2006, 11:10 PM) of cz its low..tats y i cant do anythg much....but i stil hvt jack up max oc...nw running oc 3.0 stable pi test..not yet prime....  wa... start oc ur proc liao...ur mobo supprot 1T? use that.. 2.685v is shitty low... u try find latest bios to see wehter they mod it to allow u bump up d voltage.. |
|
|
Apr 24 2006, 07:00 AM
Return to original view | Post
#46
|
|
Senior Member
4,081 posts Joined: Aug 2005
|
QUOTE(jones007 @ Apr 23 2006, 10:55 PM) how much is that? i got a friend who recommended me xp something also b4 u change anything or do any oc stuff, y dun u glace through ur manual that comes wit d mobo and also understand every terms in bios   its sometimes not onli oc to get d best of ur proc... u can play wit other stuff such as interleave bank, raid setting..hdd prefetch..etc... this will b enough for u to noe any temrs tat u wanna noe.. hope it help.. http://www.rojakpot.com/freebog.aspx QUOTE jz wanna knw hw u guys run prime test for HT proc? im using 2.4c HT....i use sp2004.... izit open both sp2004 thn set one cpu 1 & one cpu 0 thn run both together?? or i shd set both cpu same 11 or 00?? , u can run super pi/ pc mark/ 3d marks or any applocation for fast to noe it can survive or not b4 run prime test... i think it is better to run one by one.. first, run small fft for 5-8hours (to test cpu) then large fft to test its ram... and also run memtest.. coz so many thing to test, usually i test it after i happy wit d speed..  |
|
|
|
|
|
Apr 24 2006, 01:12 PM
Return to original view | Post
#47
|
|
Senior Member
4,081 posts Joined: Aug 2005
|
QUOTE(sakuraguy @ Apr 24 2006, 01:09 PM) waa... nice score for a willy... my last time willy can oc 1.6ghz to 1.7ghz onli...   |
|
|
Apr 28 2006, 05:06 PM
Return to original view | Post
#48
|
|
Senior Member
4,081 posts Joined: Aug 2005
|
QUOTE(hotwebs @ Apr 28 2006, 02:01 AM) It exsist in this world mayb u can use everst software... it tells alot things ab my proc... hope it same wit urs... Intel Website Just provide me less Information only , because this type of processor is always assembly by Dell or Acer brand dekstop pc. P4 3.0 (524) LGA775 FSB 533mhz . so i am confused with this processor specification.  Just know this processor at least have EMT64, but HT i am not so sure, but some chinese website, got mention it is support HT too. but i am not so sure. |
|
|
Jun 8 2006, 04:21 PM
Return to original view | Post
#49
|
|
Senior Member
4,081 posts Joined: Aug 2005
|
QUOTE Overclocking Overclocking the system per se does not impose a direct threat to the HDD, however, things change once the PCI frequency goes beyond 38 MHz. Some older drives like the IBM Deskstar5 series would simply corrupt all data, some others like the Western Digitals were running fine up to 42 MHz PCI frequency without problems. The same was true for the older Samsung drives, however, those drives had pitiful performance anyway so we won't talk about them. Factors that influence the stability of the drive at higher IDE frequencies are amongst other things the quality and, as silly as it may appear, the installation of the UATA cables used. |
|
|
Jun 23 2006, 02:07 PM
Return to original view | Post
#50
|
|
Senior Member
4,081 posts Joined: Aug 2005
|
QUOTE(farhan3689 @ Jun 21 2006, 05:15 PM) hey guys....how do you enter the overclocking menu like CPU - Z and all kind of that things.... ermm.... cpu-z is to see info ab ur proc and ram... not an oc software...pls reply me here or 0169551718.. btq, u can download all those stuff by searchin it 1st... use google ler... |
|
Topic ClosedOptions
|
| Change to: |  0.0218sec
 0.36
 7 queries
 GZIP Disabled
Time is now: 2nd December 2025 - 05:37 AM |
Quote