INTEL OVERCLOCKING THREAD, TIPS,Q n A, Results...Great For NueBis
|
|
 Feb 5 2008, 09:15 AM
Return to original view | Post
#101
|
 
Elite
14,576 posts Joined: May 2006 From: Sarawak   
|
QUOTE(a1098113 @ Feb 4 2008, 11:14 PM) nice guide there kmarc Wait for my "Basic guide to DDR2 overclocking"...   If I'm not too lazy....  Anyway, I've added my other long-lost guide on overclocking 939/AM2.... quite an old guide..... |
|
|
|
|
|
Feb 5 2008, 09:33 AM
Return to original view | Post
#102
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
QUOTE(a1098113 @ Feb 5 2008, 09:27 AM) @kmarc CNY mood ma..... but now back in hometown, nothing much to do also..... Yeah i can give some inputs also if you want Now i am mastering the art of Memset Dont be lazy la. Be hardworking!!   Sure, any input is welcomed.....  (if I can get my butt to start the guide! ) |
|
|
Feb 5 2008, 09:43 AM
Return to original view | Post
#103
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
QUOTE(gsan @ Feb 5 2008, 09:35 AM) nice overclock guide, now I only know the diff. between vdroop & vdrop Wah, overclocking sifu give me compliments! Takut takut....   |
|
|
Feb 5 2008, 09:53 AM
Return to original view | Post
#104
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
QUOTE(gsan @ Feb 5 2008, 09:48 AM) lol... you're more expert than me on intel platform No la...... me average overclocker only.....Anyway, gonna get started on DDR2 overclocking guide..... You guys use memset to set timings when OCing the rams in windows? The few times I use memset, the rig will hang, making it easier to set from BIOS and gradual OC in windows.... What do you guys usually do when searching for the best OC with the best timings? |
|
|
Feb 27 2008, 07:03 AM
Return to original view | Post
#105
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
QUOTE(justlikeu @ Feb 27 2008, 07:00 AM) i only know need to increase the fsb bit by bit... izzit correct? Look at my sig.... got a step-by-step guide to overclocking a C2D/C2Q.....  |
|
|
Mar 1 2008, 06:47 AM
Return to original view | Post
#106
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
QUOTE(tyss @ Mar 1 2008, 06:42 AM) I am using p35-ds3 rev2.1 with f12 bios. Do i need to increase my fsb voltage and mch voltage? I am doing 3.51@503X7. I can't OCCT stable beyond 503 but i know my ram can go higher. Is it because of the mention voltage? With such a high FSB speed, you usually need higher vFSB and vMCH voltages..... Did you set them at stock or higher? |
|
|
|
|
|
Mar 1 2008, 10:13 PM
Return to original view | Post
#107
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
QUOTE(tyss @ Mar 1 2008, 09:51 PM) what is the default NB voltage? I find that there's no fixed default NB voltage for the P35 chipset.A lot of sites say it defaults at 1.4v. My mobo defaults at 1.31v...... |
|
|
Mar 17 2008, 07:10 AM
Return to original view | Post
#108
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
QUOTE(aLWAYStHEsAME @ Mar 17 2008, 03:59 AM) Really... but I thought can go more... 24/7 = 24 hours / 7 days..... , err..what is 24/7??  |
|
|
Mar 21 2008, 09:47 AM
Return to original view | Post
#109
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
What OC speed is stable at stock vcore? And what settings did you set in BIOS....
Try a lower speed or increase your vcore. What's your vcore in BIOS? Make sure your rams are set to loose timings.... This post has been edited by kmarc: Mar 21 2008, 09:48 AM |
|
|
Mar 21 2008, 11:10 AM
Return to original view | Post
#110
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
QUOTE(kyLL @ Mar 21 2008, 09:53 AM) i can lower speeds to 333.. but then its 3.0g. Try lower settings then. Maybe start and 360mhz and slowly go up. If you still get errors, try lower than that. However, it is possible that other parts are unstable.... maybe you set lower FSB strap? What mobo are you using? How did you set your ram multiplier/divider/ratio?vcore is 1.15 in bios. stock vcore. ram settings are loose. 5 5 5 15. tried with a pair of 667mhz ram and 800mhz. once i set to 400, then i cant run prime95 anymore. ^ Followed the same settings as per the guide you wrote. heh. (: Alternatively, try increasing your vcore... |
|
|
Mar 21 2008, 02:16 PM
Return to original view | Post
#111
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
QUOTE(kyLL @ Mar 21 2008, 11:32 AM) I'm using a GA-P35-DS3L. OIC. The DS3L doesn't have any settings for the FSB strap....Which is the setting for FSB Strapping? im a total newb at this. i just followed your guide verbatim. d: Anyway, try lower FSB and increase it slowly to see what is the max limit FSB speed. Then try to increase the vcore and see. Your E8400 is supposedly warrantied until 1.35v vcore.... but keep the core temperature below 60-65'c... |
|
|
Mar 22 2008, 11:46 AM
Return to original view | Post
#112
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
QUOTE(kyLL @ Mar 22 2008, 01:04 am) coretemp vs realtemp. The reason the difference is 10 degrees is because the Tjunction Max is different. Core temp sets it at 105'c while real temp sets it at 95'c. Why? That's because nobody knows what the actual Tjunction are for these CPUs as Intel doesn't reveal them......o_o a difference of about 10 degrees. thats at vcore 1.25.. Mmm. btw. how come my bios settings is 1.25v but my cpuz shows me less? around 1.8-1.2? The "Distance to TJMax" would be the most accurate temperature indicator, to tell you how far you are from the max core temperature before throttling. You can display that in core temp too. Just go to the settings and select the "Delta to TJMax". CPUz's vcore is lower due to vdrop and vdroop.... This post has been edited by kmarc: Mar 22 2008, 11:47 AM |
|
|
Apr 8 2008, 07:51 AM
Return to original view | Post
#113
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
QUOTE(amalmuahahax @ Apr 8 2008, 02:09 AM) hello OCers.. You can check out my guide on overclocking. I was using the same CPU/mobo when I wrote the guide..... im just getting started to overclocking.. im using Gigabyte GA-P35-DS3 mobo + Intel C2D e6750.. i dont really know how to OC my proc.. all i know is EasyTunePro 5 has the feature to OC my proc.. shd i just do it frm there? what are the other things i need to take into consideration? thanks  |
|
|
|
|
|
Apr 9 2008, 06:41 PM
Return to original view | Post
#114
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
QUOTE(amalmuahahax @ Apr 8 2008, 05:53 PM) thanks to kmarc's beginners guide to OCing and also guides from vincentlaw, If you're stressing the proc, make sure you use the "Small FFT - stress CPU" option rather than the "Blend test" in orthos.i finally tested my first OC skills this evening.. the results.. 3.4ghz, 425mhz x 8, 1.375v core temp average at 58c for 3 hours on Orthos critics & comments are welcomed  That's a nice OC.... last time, my E6750 was running 24/7 @ 3.5Ghz @ 1.425v (set in Bios).... (Not a gem proc....)QUOTE(dmc0105 @ Apr 9 2008, 12:05 PM) Hurm.. You mean using stock HSF? You can overclock but it will be limited by the temperature. Keep you core temperature around 60-65'c.....Let say im using q6600+ep35 ds3/p35 ds3... Can overclock without cooling system?? This post has been edited by kmarc: Apr 9 2008, 06:42 PM |
|
|
Apr 9 2008, 08:20 PM
Return to original view | Post
#115
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
Unless you are using applications that loads your CPU 100% all the time, that temperature is ok....
For normal usage, the core temperature will probably seldom reach that high.... |
|
|
Apr 11 2008, 06:46 PM
Return to original view | Post
#116
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
QUOTE(amalmuahahax @ Apr 11 2008, 01:33 PM) - 'original' always same as 'current'... That could be because it is corrupted due to previous unstable overclock. It could also be because your current overclock is unstable.....- after few hours it will close by itself, saying theres error This post has been edited by kmarc: Apr 11 2008, 06:46 PM |
|
|
Apr 12 2008, 03:11 AM
Return to original view | Post
#117
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
QUOTE(ham_revilo @ Apr 12 2008, 01:34 AM) one thing bout eztune.... i always experience error pop up by eztune even when i didnt oc my pc... everytime startup surely have that kind of error saying GUI MFC fail or something like that... thats y dont really like using it... it gives me a feeling that it is not a stable software... no offense though as it is only my thoughts... QUOTE(tkh_1001 @ Apr 12 2008, 01:47 AM) @revilo Yup. Like tkh_1001 said, the startup problem of easytune5 is probably due to software bug. I too have the same problems on startup.mine used to have that problems too... its not a sign of OC instability, more of a software issue i would say... but if u are in an OCed state and have already run the eztune n suddenly it close by itself after sometime that will really mean ur OC is unstable... more likely to be ur memory i would say The sudden closing of a program, however, is usually due to unstable overclock. It could be any programs, like orthos, prime95, superPI, etc (while you were stressing your rig......) This post has been edited by kmarc: Apr 12 2008, 03:11 AM |
|
|
Apr 13 2008, 10:22 PM
Return to original view | Post
#118
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
I have used Gigabyte P35-DS3 (rev 1.0 and 2.0) and DFI blood Iron P35 without any problems. Either with the crucial ballistix or crucial 10th anni....
Try using just one stick and see whether the problem still persist.... it could be a defective ram module... This post has been edited by kmarc: Apr 13 2008, 10:23 PM |
|
|
Apr 16 2008, 08:50 PM
Return to original view | Post
#119
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
QUOTE(sukatra_aicaca @ Apr 16 2008, 07:48 PM) here i come again... Wow! That's hot.... when I overclocked my previous E6750 @ 3.5Ghz @ 1.425v BIOS set, my core temperature on 100% orthos load was about 60'c only..... that's on my xigmatek + naked rig.... with my major & regular problem...CPU TEMP... i got the Tuniq TX-2 today.. then i apply la to my proc...then pasang punye pasang... check the temp  ...hot lor... idle load i dunno what is the main problem why me temp is hot compare to the others... -3.2Ghz -default vcore -tuniq tx-2 then ape lg yg x kena... |
|
|
Apr 20 2008, 10:35 AM
Return to original view | Post
#120
|
|
Elite
14,576 posts Joined: May 2006 From: Sarawak
|
QUOTE(bigboy @ Apr 19 2008, 10:48 PM) dunno which part want to forward my topic... What is your setup/configuration?ok.plz mee.... i've a problem with cpuz.. 1. i've setting at bios to OC my proc from 2.13 to 3.2 which mean 400x8=3.2Ghz 2. i've also disable cpu features except thermal control 3. i've increase cpu voltage to 1.345v, 2.0v for ddr, at other setting (forget lorr doh.gif ) 4. ok the problem is, at bios before detect ram and ram, is stated my proc is 3.2ghz and then i enter delete, i check at my bios blue screen is also 3.2ghz ... temp is 50 degree the problem is.... when log on window, i check through cpuz, my core speed is 2.66x8=2.13 ... not stated 400mhz 3.2ghz.... can anyone help me????   It is possible that your rig reset due to unstable overclock..... |
|
Topic ClosedOptions
|
| Change to: |  0.0450sec
 0.44
 7 queries
 GZIP Disabled
Time is now: 9th December 2025 - 01:05 AM |
Quote