▐▐ ★HTC Desire Official Thread V10 ★▐▐, Tranquillement Brillante
|
|
 Apr 19 2011, 01:58 AM
Return to original view | Post
#1
|
 
Junior Member
321 posts Joined: Dec 2009 
|
someone plz help me...
i try to flash new rom GB from xda... but i stucked at HTC logo... i wipe cache and everything, apply the ext 3.. but the problem still there.. could someone tell me how to transfer data to my desire if i stuck at htc logo... the reason why i wanna do this is because i dont have leedroid 2.4 zip in the sd card... This post has been edited by bluetomsguy: Apr 19 2011, 03:08 AM |
|
|
|
|
|
Apr 19 2011, 09:46 AM
Return to original view | Post
#2
|
|
Junior Member
321 posts Joined: Dec 2009
|
[quote=phgmail,Apr 19 2011, 06:48 AM]
what recovery u use? if amonra, click at usb tongle to access ur sdcard. if cwm, find something similar. i dont really remember.. Added on April 19, 2011, 6:51 am i use cwm... i read on the xda how to access but it ddint worked with me... i just connect my phone to pc and then press fastboot, after that nothing happend... futhermore, i have this error : "can't mount /dev/block/mmcblk0p2 (File exists) error mounting /sd-ext/!" |
|
|
Apr 19 2011, 12:06 PM
Return to original view | Post
#3
|
|
Junior Member
321 posts Joined: Dec 2009
|
why there is a lot missmatch md5 for leedroid 2.4?
i downloaded it straigt from leedroid.com |
|
|
Apr 19 2011, 01:18 PM
Return to original view | Post
#4
|
|
Junior Member
321 posts Joined: Dec 2009
|
can someone tell me what should i select in CWM if i want to extend to ext 2/3 ?
is it mount /sdcard, mount/sd-ext or format sdcard or format sd-ext ? |
|
|
Apr 19 2011, 03:24 PM
Return to original view | Post
#5
|
|
Junior Member
321 posts Joined: Dec 2009
|
QUOTE(HeartRoxas @ Apr 19 2011, 02:26 PM) off your phone and, go to your bootloader (hold vol. down and press power button) i use :at the top of it see the model... HBOOT S-OFF Desire PVT4 means you need Amon-RA recovery... CWM will not work on PVT4 (40000 erase size) devices and although you can boot into the recovery... you will not have partition SD card choice, also flash ROM will fail most probably... it's not mount/format sd or ext... it's just Partition SD Card... a seperated choice, simple yet not misleading... Hope this helps... Good luck..   1)rom manager 2)select partition sd card\ 3)select 512 MB and 0 swap after that, it brought me to CWM...what i confuse here, what should i do next ? is it just reboot or i have to something else in CWM ? |
|
|
Apr 19 2011, 05:57 PM
Return to original view | Post
#6
|
|
Junior Member
321 posts Joined: Dec 2009
|
QUOTE(HeartRoxas @ Apr 19 2011, 05:45 PM) you are supposed to see a Partition SD Card option there... Thereafter you can continue on your ext 2 3 4 upgrade... If there is none, flash a new recovery using unrevoked... it seems a later version of CWM said by a previous forummer that it works... but still i will recommend Amon-Ra if you are PVT4... and you dont particularly need ROM manager.. it's just a quicker platform.... it will still need you to navigate at the recovery menu... i already select partition SD card...Good luck! =) then it brought me to CWM...then what to do next ? somemore, i tried to flash to 2.4.1 did wipe data and cache but still stuck at HTC logo.. dunno why... my system: hboot 0.80 pv1 s-on is there any requirement to be fullfilled 1st ? This post has been edited by bluetomsguy: Apr 19 2011, 06:29 PM |
|
|
|
|
|
Apr 19 2011, 11:30 PM
Return to original view | Post
#7
|
|
Junior Member
321 posts Joined: Dec 2009
|
dunno whats wrong wit my phone,
i already configured the apn for celcom for mms for both 2g n 3g... but still got general network failure... Added on April 20, 2011, 12:26 amno answer ??? do i need to enable mobile network ? how bout enable always on mobile ? This post has been edited by bluetomsguy: Apr 20 2011, 12:26 AM |
|
|
Apr 20 2011, 12:59 AM
Return to original view | Post
#8
|
|
Junior Member
321 posts Joined: Dec 2009
|
QUOTE(phgmail @ Apr 20 2011, 12:53 AM) u use which config? i use the same setting as u are...try use this. always working for me.. Celcom 3g internet setting : Name : Celcom 3G Internet APN : celcom3g MCC : 502 MNC : 19 APN type : default Celcom 3g MMS setting : Name : Celcom 3G MMS APN : celcom3g MMSC : http://mms.celcom.net.my MMS proxy : 010.128.001.242 MMS port : 8080 MCC : 502 MNC : 19 APN type : mms but do i need to enable mobile network 1st ? |
|
|
Apr 20 2011, 01:57 AM
Return to original view | Post
#9
|
|
Junior Member
321 posts Joined: Dec 2009
|
QUOTE(phgmail @ Apr 20 2011, 01:06 AM) of course.. u want to use mobile connection right? even i enable it, i still cant get the mms immediately...i think the problem might be solved already because just now i can send and receive mms immediately wihtout enable the mobile network... my apn setting is just 2g mms and 3g mms This post has been edited by bluetomsguy: Apr 20 2011, 03:08 AM |
|
|
Apr 20 2011, 11:35 AM
Return to original view | Post
#10
|
|
Junior Member
321 posts Joined: Dec 2009
|
guys...
how to detect the phone location if get stolen ? i tried using wheres my droid...but failed coz i didnt turn on the phone gps... any other way ? plz help me... |
|
Topic ClosedOptions
|
| Change to: |  0.0433sec
 0.46
 7 queries
 GZIP Disabled
Time is now: 11th December 2025 - 03:19 AM |
Quote