Hi guys , guess what? I am back into Modding scene . Some of you may have followed my worklog last time which is my PRoject Dragzon http://forum.lowyat.net/topic/202361 , though it was a failure i guess?

Ok what I'm gonna do is to replace my current casing which what u have seen the last page of my Dragzon worklog, still the same one till this year. Recently I've been browsing through the net , give a little research on new casings. I've chosen the NZXT Gamma Casing for this Case mod Project which is called "Futuristic Magnatrone" , This is gonna be a simple mod though nothing that big. As for now I'm currently waiting for my shipment of my NZXT Gamma casing to arrive which will be tomorow Tuesday. and also UV arcylic. As I promise this time will be much stunning then my earlier Case mod which I've done. I hope you guys will enjoy this worklog as I update.

The Ideas and what I'm gonna do for this mod , well I could not tell you guys much yet. still in planning stage.

cant wait

The Good News is that I received my Casing today , lucky the Kangaroo came just in time when I got back home

The Box , Good Packaging


Opening Session




This post has been edited by sherren: Mar 29 2011, 03:51 PM

Here's more a closer look on the NZXT Gamma Casing,



Top Mesh



It comes with a Rear 120mm Black n White NZXT Fan



The internals looks



PSU placement , if you could see there are round rubber pieces for the PSU to sit on



PCI slots Mesh type



The internal Rear Top view


Tooless design for the HDD cage


That's all for today stay tuned for further updates

Still waiting for my UV Arcylic & some other stuffs to arrive

This post has been edited by sherren: Mar 29 2011, 04:31 PM

looking promising.

of course after so many years of not modding , I'm back

A small update , I can't do much at this hour , I do what I can do and what I currently do have

Some of you must be wondering why do I added those touch for , there will be something on top of it



I can't do much now , so slowly bit by bit , sourcing out items.


Stay tuned for the next update

wow ! cant wait for the next update !

what is the name of the bluish thingy that needs the allen key to be tighten and loosen.. would u kindly let me know lolz..

I also not sure bro, I remember i bought 50 pcs thru a friend who knows the taukeh of motor shop . for my previos mod project , usually u see this allen key screw can get frm motor shop. cause they use it on their helmet mod?

haha!! cars also has it, it's like to close up those holes in a neat way

yeah also to add a touch to it but I have something for that to be on top of it

---

Added on March 31, 2011, 3:20 amnext is to cut the side panel a window ,

This post has been edited by sherren: Mar 31 2011, 03:20 AM

can't wait for the pictures haha~

Morning Peeps , I just layered Masking tape on left side panel , and next will be my right panel ,

For the left side panel window , not to sure wether to have a standard Rectangular window with curve edges , or hmm..

Carefully applied masking tape to neatness!

---

Added on April 1, 2011, 10:24 pmFor the 120mm Fan , Gonna get rid those honeycomb's the two top's and the rear , later on as the front panel there are some honeycombs too , will be plan later for that.

Took me some time to mask with measurements









Next is to Cut em with my B & D RTX 1 which currently starting now after this post


This post has been edited by sherren: Apr 1 2011, 10:24 PM

Just finished cutting

Halfway cutting through the honeycomb





Finally Done Cutting




The Rear Fan 120mm




a Closer look on the top 2 x 120mm Hole



I might need to get a U channel Rubber moulding for the honey comb and the rear fan , kinda sharp edges..



That's all for today

no update cant wait to see more

waiting for some stuffs to arrive which I ordered to be used

nice2..
cant wait for u to update ur MOD...

can wait for more updates...

wow..good job bro..nice casing

This post has been edited by matnur_83: Jun 2 2011, 11:24 PM