Im newbie for oc, got my i5 2500k and cm hyper 212+ and finally, i setting multiplied x45, 100mhz x45= 4.5ghz, does not touch any volt thing (Learn it from net and youtube ^^). Im already running prime95 about 1 hour, temperature is around 70c, is it pass? i wan running this 4.5ghz everyday.

Ok lar this one.... Intel Burn Test ok?

what is intel burn test? I found some oc method them are adjust voltage, any different with adjust volt?

Its not a voltage tweaking tools... Just some sort of System Stability test which torture your system a little harder than Prime95...
INTEL BURN TEST


This post has been edited by JasLyn: Mar 16 2011, 02:49 PM

nono, i not mean intel burn test a voltage tweaking tools, i mean intel core i5 2500k overclock method that adjust voltage. ok, i will go n get a try with intel burn test. Btw any different with adjust volt in overclock?

---

Added on March 16, 2011, 2:55 pmhow long should i run the intel burn test?

This post has been edited by ong85: Mar 16 2011, 02:55 PM

Its not about how long, its about how many passes.... you can choose the level of stress and level of passes... I always make minimum 10-20 passes... but on extreme OC with chicken cooler, I put only 5 passes

Btw you have an unlocked multiplier CPU which my case, max only x20... I have to settle BLCK 220 only and pump VCore to 1.45v... I speak i5 750 with H70....

TS u can discuss it here :

http://forum.lowyat.net/topic/1709431

Prime95 1hour is nothing. Try LinX or IBT 50-100 passes... owikh84 found that you need at least 50 passes to confirm stability. And watch the gFlops. If the gflops is a too low, pump in a little bit more voltage. If the gFlops fluctuate, do the same. But watch the temps. Use CoreTemp or something to watch the max temps.

1.45V will kill your proc very fast... watch out oo

Then how long should i put on prime95?

selfdz87 has made it very clear. Thread closed. Do not open unnecessary thread when there is an existing one already