My OC Stable?
|
|
 Mar 16 2011, 02:10 PM, updated 15y ago
Return to original view | Post
#1
|
 
Junior Member
73 posts Joined: Feb 2011 From: Petaling Jaya 
|
Im newbie for oc, got my i5 2500k and cm hyper 212+ and finally, i setting multiplied x45, 100mhz x45= 4.5ghz, does not touch any volt thing (Learn it from net and youtube ^^). Im already running prime95 about 1 hour, temperature is around 70c, is it pass? i wan running this 4.5ghz everyday.
|
|
|
|
|
|
Mar 16 2011, 02:43 PM
Return to original view | Post
#2
|
|
Junior Member
73 posts Joined: Feb 2011 From: Petaling Jaya
|
what is intel burn test? I found some oc method them are adjust voltage, any different with adjust volt?
|
|
|
Mar 16 2011, 02:53 PM
Return to original view | Post
#3
|
|
Junior Member
73 posts Joined: Feb 2011 From: Petaling Jaya
|
nono, i not mean intel burn test a voltage tweaking tools, i mean intel core i5 2500k overclock method that adjust voltage. ok, i will go n get a try with intel burn test. Btw any different with adjust volt in overclock?
Added on March 16, 2011, 2:55 pmhow long should i run the intel burn test? This post has been edited by ong85: Mar 16 2011, 02:55 PM |
|
|
Mar 16 2011, 04:52 PM
Return to original view | Post
#4
|
|
Junior Member
73 posts Joined: Feb 2011 From: Petaling Jaya
|
QUOTE(ne0cz @ Mar 16 2011, 03:48 PM) Prime95 1hour is nothing. Try LinX or IBT 50-100 passes... owikh84 found that you need at least 50 passes to confirm stability. And watch the gFlops. If the gflops is a too low, pump in a little bit more voltage. If the gFlops fluctuate, do the same. But watch the temps. Use CoreTemp or something to watch the max temps. Then how long should i put on prime95?1.45V will kill your proc very fast... watch out oo  |
|
Topic ClosedOptions
|
| Change to: |  0.0144sec
 0.51
 6 queries
 GZIP Disabled
Time is now: 7th December 2025 - 10:54 AM |
Quote