The long waiting D1 spec throttle controller is now available !!!!

From 3 drive to 7 Drive, from basic to full of features

[attachmentid=2084429]
New Generation D1 spec throttle controller, called 7Drive


Extra feature loaded. View list below


Installed on a Mit. Lancer 4B11


Intalled on a Persona Elegance.....


INFO:

Most, if not all car manufacturers, now incorporate the Electronic Throttle or E-Throttle to their engines. The throttle was previously directly controlled by a steel cable. Modern setups are now driven by electric motors and electronics. One major reason for the car manufacturers to do this was easy incorporation of various options such as traction control, cruise control & others. A major complaint about the E-Throttle is its laggy response which makes the vehicle less responsive to each prod of the throttle pedal.

One product available now is the Electronic Throttle Controller (ETC) that essentially, works like a piggyback that changes the signals going to the car’s ECU. This ETC allows the driver to select various settings to suit their driving style & requirements such as modes for economy or speed. A throttle pedal angle of say 30 degrees, in economy mode, the throttle plate will open only 15 degrees whereas in speed mode, 62%. In speed mode, the throttle plate opens faster and wider giving the driver the sensation of an extremely sensitive engine allow fast driver quicker response from their rides.

An ETC is easy to fit comes with a set of connectors that interfaces the throttle pedal signals to the ECU. The ETC is then taught to recognize the characteristics of the car’s E-Throttle system via a few simple steps. After that, you get to enjoy the jump in instant response.

D1 Spec New Version (Slim Type) throttle controller called "7-Drive" is now available. RM500 with free installation for all models with drive-by-wire throttle. Comes with battery voltage display too. Plug & play*.

****CAMPRO SYSTEM NEEDS CUTTING & TAPPING****

IMPROVED features:

(1)Over speed warning - programmable speed limit to warn you upon over speeding.

(2)Avoiding from unintended acceleration - the new controller circuit is more stable.

(3)Power interruption memory embedded - the memory stays even the system is disconnected from the power source.

(4) Reverse, parking and braking deactivation - for greater safety and reliability.


This device is for Drive-by-wire Throttle. If youa re not sure about it, pls call directly for the answer. Click Drive By Wire if you want to know more about it.


PRICE: RM500

INSTALLATION: included

WARRANTY: 1 year

howiechoo 012-767 1360

CLICK HERE FOR MAP | CLICK HERE FOR MORE PRODUCTS

This post has been edited by howiechoo: Jun 29 2011, 01:43 AM

Just installed the 7-Drive today, work like charm!!

Recommanded for those who want fast and accurate response of your car.

Thanks for the introduce XD, Like it .

thanks bro..later upload your pic...sorry, your car pic..haha

LOL XD, Haha

bro, what car also can install as long as it's drive by wire??

what about isuzu dmax?

let me know bro

Just installed this gadget on my car today
Overall I must say its AWESOME!!!

Free bump for you!

thanks for support...

i had installed this during August promotion with Drex.
it's a nice product.
no increase in horsepower and torque, but increase in response is definitely noticeable.

halo,boss.
wanna ask mivec 4G92 can use?

i dunno izzit can help me to control it the throttle body or not.
cause my throttle already change to performance throttle body.
stock is 60mm,now is 70mm.
everytime start engine is very high rpm till 3k,so this izzit can works on me in normal driving,i hope normal driving can save fuel.

nope, sorry :>

waiting for my year end bonus *droool*

haha, no prob bro..slowly

Hi Dude,

Going to write some review about this D1 spec throttle controller for Howie.

Last few week, just done a whole car soundproof with howie, after soundproof feeling the 30++KG soundproof materials is quite heavy for the car. The car not really willing to push now. So decided to visit Howie for the solution to gain back some pick-up.

Right after installing the throttle controller, immediately feeling the engine rev is faster, accelerate is lot faster with sport mode. No more feeling lag on Auto car.
Press a little bit then the car is pushing forward now.

On econ mode, well. The FC is improve significant. Normally 1 tank i can go for around 400-420KM on my civic, tested with econ 3 mode (Not really put into econ 5 yet, i believe econ 5 is even more fuel efficiency) . Tested with econ 3 mode, manage to increase 50-70 extra KM. That is good for me.

Well on econ mode, feeling the engine is smoother, slowly accelerate although u pressing full pedal on it. Good for a heavy pedal person for me. It help u to control ur foot.

Overall, with the half price compare of the sprint booster, definitely a worth purchase product. I believe both product working on same way.

thanks for the feedback bro.....actually a lot members already install it but just no 1 come out with a test result..they are silence killer..wanna tapao other car..lolz

Hi! Will this work with Ford Fiesta?

yes, it will work with all ford that have e-throttle

bro does this work with suzuki swift (zc21) 1.5 auto?

Wonder if persona car, with modification exhaust and open pod air filter works with this products.pm me

This post has been edited by necromancer33: Jan 5 2012, 11:22 PM

Any car with e-throttle can use.

If it Persona are still using OEM throttle, then it can use.

currently, my gen2 has the following act which i dont like.
Blip throttle till 2-3k rpm, then release, the rpm comes down slowly. Unlike in cable system, or in continental car.

can this be cured by installing thi throttle controller?

cant really understand...call me to let me know more :>

myvi 1.5 can a?

as i know it's still running by cable..so cant...

Thx bro Howie for the installation.

Now car have more vroom vroom d.

any peugeot 308 vti install this yet? can this be installed in a 308 vti which adi have a sport mode?

no prob, thanks fow waiting too :>

When got stockkk?

hi bro, vios 08 auto can use =) ?
and how to use @@

yes, it's compatible with vios..
just plug and play. you will notice the difference when you driving...

how about preve?

hello bro, vios 08 can use ?

yes, vios can use to increase throttle response

Does it works in Mazda 3 1.6 year 2010? please let me know I do interested to work out

is there a version 2 with a smaller and compact display unit?
this one? how much is the difference?

pm me best price for waja plz

sorry mine is not the same as this....:>



This post has been edited by howiechoo: Jul 31 2012, 09:25 PM

D1 spec ETC arrived, grab fast !!!

Hi bro Toyota harrier 2.4G year 2005 suitable? And how much?

Does it compatible with "Mazda 3 2.0 HB year 2012(New Facelift)"?
Please PM me , thanks.

yes can...do call me for info..thanks

Have u installed this on fiesta? Heard some etc will cause the warning light to come out on fiesta. If u can guarantee none of these will happen,count me in as the next owner of this etc

This one need to connect to obd2? if I using another device on obd2 then no way I could add this one in right?

same question - is this using the obd2? as i 'm using obd2 for other purpose now.
My car is honda city FL 2012.
anyway will this void my warranty?

Can suit Inspira 2.0P?

yes bro....

still have???

as long this thread is not close, it'a available

can use for toyota prius c?

yes u can unless he find for u obd y splitter...i can find it in Malaysia....on web is about USD 10

actually there's no need to use the y splitter.....we got our way

prius c should no a prob..i believe we got the kit for prius

i m not cutting any cables so can connect obd II scan gauge, speed lock & this D1 throttle control together and remove anytime when I go for service.....

shop location? take credit card?

we got our way doesn't mean it cut any wires

shop location is on first post and in my signature...cc accepted

I ll arrange my time....I think I know where, next few shop on your left from front door have tire shop, I went to my supplier the same row, but i did take a look but nobody around....

This controller have 7 step sports & 3 step eco mode?

Then for the Insight install, does the original eco still work?

new model has 9 sport and 5 eco...

it doesn't related to ur ori eco mode....

Bro this can install in mazda 6 2.5 yr 2008 ?

if is not related then I ll have to sets of mode d right?

if non eco i got 9 sport & 5 eco

then eco i got 9 sport & 5 eco....

I hav another fren 1 sell me NRG brand but he is totally sucks with electronics if buy from end of the dayr i ll be figuring out myself....

if u wan to be dedicated, yes ur eco will have 9+5 and normal will have another 9+5...but to inform u that this is not what you actually think...This is only by adjusting the throttle sensitivity, it;s not the same as the eco in hybrid car.

Friend, does this support Ford Focus Mk2?

The selected have to be reconfigured everytime u start the car?

Pls kindly advise.

Thanks!

I understand, I m using Prius C, the ECO very hard to use in when uphill or up slope....then sometimes normal too sensitive for me.....just tat we such option can tune suit my driving settle.....

Another thing is if hooking up speed lock, obd ii scan gauge & D1 ets any additional charge? if have PM me....

My plan is to get the obd ii scan gauge & speed lock 1st, monitor all the parameters 1st....do u hav any speed lock suitable for prius c? this gadget to combine this 3 things together if hav can PM me price....

HI, Please Quote me the Price without installation and with installation. Share me your location.

i believe i got the connector for ford, but still i need a car to know whether it fit or not....

the setting will be remain the same when u turn off amd on......

for other obd thing we dun do install...we only install our own product

I mean the selected mode will still remain there if i turn off and on my car?

Im not referring to the controller setup, but the changes made to my car.

Will it reset when i turn off my engine?

Thanks!

yes correct is still back to the question obd II have only 1 port, still need hook all 3 item if i buy the controller from u....

if cant connect 3 of them to function maybe I wont buy your controller.....

then dun buy it..thanks

Yes still same

thanks for good reply.....at least I know this option is out....I ll find some other way then....thanks for the good advice...

i believe there's some confusing here.....

so to conclude,

if u have no device on ur obd, u can install this
if u have 1 device on ur obd, u can still install by us without using the obd connector

so if u have more device to connect to ur obd, u can still install my ETC because i dun really need the obd connector.


as for how many device u can connect to ur obd connector, figure out urself. i dun provide the solution for product not from me.

If your installation is permanent, then have to wait after warranty. thanks again. My car to date is only approaching 3.5 mths old with 13k mileage....

a car has got nothing as installed as permanent except car chassis

I need to remove every time service every 10k till 100k so i guess later la....no also got speed lock cum with brake lock need remember to remove as the tech check the car might take note of it, & if ECU burn or other electrical fault is bcos the driver plug in something to diagnosis port....

As for any strut bar or watever bar is install if any prob at absorber or spring then is cos by the bars install by the driver

God love you

bro, what is the current price for D1 E-Throttle + installation for Proton Gen2 CPS??

PM Me~

CUrrently only available the dtc with auto cruise function. Rm750

Can this fitted to Alza? Does it comes with wiring harness?

bro, do you have any review from ford fiesta 2011 who's already plug in this ETc...cause hear than ECU will overwrite the setting after off n on the engine..pls advice...

there;s no way the ecu will overwrite the setting...maybe u should ask them how it can happeb

howiechoo, so this gadgets is direct plug and play at ford foiesta OBD port there? Pls advice

Hi, can you show more information on this DTC with auto cruise function? Very interested!

it will fit any obd2 connector. the only concern is whether i have the connector for fiesta throttle or not...

with extra auto cruise for car to have auto cruise. convenience to use on highway

Hi,

Can be use for forte 6 speed?

Hi there, compatible with Inspira 2.0?

yes....

yes

Bro, can this fit on Nissan almera 2012?

Bro, can this fit on Nissan almera 2012?

bro how much for saga flx ? Need cutting wires?

This post has been edited by A573154: Jun 11 2013, 07:40 AM

hi, i understand that the one with auto-cruise function will involve some tapping into other wires is that true? means that'll void my car's warranty.

tapping wires wont void warranty.

so means for the one with auto-cruise function, the entire installation won't void my car warranty ?also how is the installation done? is there any wire cutting involved, etc?

This post has been edited by CyberKewl: Jun 18 2013, 11:41 PM

the msg u quoted already answer ur question.

Hi can use for Suzuki Swift Auto 1.5??

yup can..

Do u have D1 Spec Throttle controller ready stock for New Ford Ranger ?
Plz pm me your best price
Thanks

Hi, available for hyundai elantra 1.6?