1st off all, i'm sorry coz my english is not to good...i try to speak with picture later to tell everything on my mode...basically,not real mode, only repaint it into white color ....i got my inspiration few month ago while searching for best affordable casing for my system and i fall in love with Lancool Dragonlord PC-k62

This is my previous System

Casing : Lancool Dragon Lord PC-K62 (black)
Mobo : Asus Maximus II Formula
Ram : KIngston Hyper-X 2x2GB 1066
Proc : Intel Q6600 Go stepping
Cooler : Cooler Master Hyper 212+ with artic cooling F12 fan
GPU : Sapphire HD6870
PSU : Corsair HX750w

Here is the picture of my system..



and complete with side panel..

---

Added on February 26, 2011, 1:46 pmreserve for update..!!

---

Added on February 26, 2011, 1:46 pmreserve for update..!!

---

Added on February 26, 2011, 2:03 pmOne of the reason i choose this casing because its tool less design...easy to assemble and disassemble part from the case...now, disassemble all the cover to repaint in white color...as easy as a b c





then, i do masking tape for lining my case.....

---

Added on February 26, 2011, 2:25 pmPainting cost involve....

4 tin Phylox 102 white (nippon paint) = rm6 x 4 = rm24
2 tin Phylox 128 clear (nippon paint) = rm6 x 2 = rm12



there is no primer or base paint... just spray with white paint... 1st layer...



after 1 hour, then spray another layer......



all together 3 layer.... then 1 layer for clear paint....last time painting my bicycle almost 9 years back...and the painting job not so good... still accepted for me..

This post has been edited by jungle_boy: Apr 23 2011, 05:37 AM

Nice painting and don't worry, practice makes perfect

thanks

done some sleeving for ur product..i'm still new with this sleeving thingy...love black and white theme..



and for custom audio cable for my Altac Lansing ATP-3, i'm order from ssyycc ...white sleeving..



thinking to spray my atp3 in white color, but, don't know how to disassemble the satellite, so the project KIV...

white sleeve look awesome...

wow...nice pc bro...
keep it up bro...

cant not wait see the result

any update??lolz..

milky white?upgrade galaxy white?hahah

maybe because not many mode using this white sleeving,that why look unik.

thanks bro...

i'm afraid, the result will disappointed all of you... ..i'll try to make it as accepted as possible...

update finalize painting....



after finalize it, i'm notice that same of the part, not been paint, but i already spray clear all the thing..before this i thought not visible, that why not spray it... maybe next version of this casing will be more detail and careful

---

Added on February 28, 2011, 7:30 amif asus , will try to get it.. ..

btw, some update..

Complete..!!







will update again once i got my new thing..

This post has been edited by jungle_boy: Feb 28 2011, 07:30 AM

wow pretty amazing paint job TS....
looking forward for any modd from u...

mung ah pulok mod..haha

nicely done

love the color contrast

nice color combine..great job

Very nice colour combination. You have just gave me a new idea for my future casing colour bro. Good job and keep it up.

fery very nice!!!
wanna copy ur theme colour later...

thanks bro....next mode....wait...got few picture more...


bro..jadi ke angkat casing ni rm100 ..macam syg je nak jual rm100

thanks bro coz dropping by... i love this theme color ...


thanks bro...

hope so many mode used black n white theme...cool..


sure...i also copy from others

btw, update some picture....

front view...



and closeup...



need to tidy up my table..

Nice work out there, love your paint work and cable management.
Any closer shoot for your cable routing?

thanks bro... cable routing...? hard to do cable management coz i'm not pro...this is the best i can do..all cable routhing behind the mobo tray...got some space for it...mdpc sleeve make a bit tight to close the panel before...do some cable management and now easier to close it then before..






will be using this mobo and ram in future...

white always brings out a lot of things
thumbs up ^^

you make your rig look so sweet and sexy.

thanks..


thanks... more update soon.. but,maybe in 1 year later...

nice sleeving..can u make it for me?huhuuh..FOC..lol

nice painting! white case with black linings....

nice job bro. nice painting also. im not a big fan of k62, but u make me think twice hehe

@ jungle boy . 1st of all . good moding

got 1 question in mind mine

at the side window there, got few screw holding the window rite , how u get the screw off?

thanks bro...

hehe...maybe we can cr8 k62 case mode member..

the side panel...? the screw are L-an-key (if i not mistaken the name), but, i used "playar" to unloose then... thanks bro coz dropping by....

Update picture with night mode...





with my previous setup....

and now setting with this....



my rig currently using as folding machine @ home... team 2999... anyone with monster pc should try..

This post has been edited by jungle_boy: Mar 25 2011, 01:24 PM

wow yr cpu cooler. u spray to white colour izzit ?

no laa..that artic cooling F12 fan...already in white color..

hmm. my casing oso Lancool . k-58 .hehe wanna spray into red . feel nice ka ?

personal feeling bro..if u like, then, do the best.. btw, good luck bro..can cr8 ur worklogs once u mode it...

btw, update some foto..now will equip with watercooling stuf... thanks to bro ezzy for wc parts...

Resleeve some of my spu cable with black n white combination....previously all black sleeve..




mod infron intake fan..changing from 140 blue led fan from liang li to xigmatek xlf white led..



my watercooling component...

CPU Block : EK Supreme HF - Full Nickel
Radiator : Hardware Labs Black Ice Stealth 280
Reservoir : EK-DDC X-RES 100 - Acetal
Tubing : PrimoChill White
Pam : Laing ddc 3.2
Fittings/Compresssion : Bitspower G 1/2" Silver Shining Compression
EK Psu Jumper



stay tune for more update...

Nice new folding@malaysia team 2999 rig. Haha promote abit ya.
I wanted to play wc too but my PC noob no use proc fold. Haha can let me know how much spend on wc stuff? PM me ya. Need save money haha

very nice bro i like the white/black theme,
look clean and smart,
btw ur sleeving skill is awesome

thanks bro...yup....folding@malaysia rig.. ....btw, u got pm...


thanks bro...btw, my sleeving skill is not that good..still learning..sometimes, the result are bad...need to cut again and redo again...for me, to make a perfect heatshrink on the right position is not easy...

btw, got some update picture....

my sleeveing theme..


radiator on the top, and fan from inside the case...


using com fit for radiator is not a good choice...coz there is no opening to tighten the com...


artic cooling mx4 in action...


cpu waterblock...


my extension mobo power cable...resleeve...


for the next process , i'm forgot to take picture...coz in emo that time.... need to be more patient after this....next process is complete setup.... ...stay tune...sorry for my nood stkill on photography...

cantek lah pc abang...buleh sleeves kan utk saya x? hhihihi...
good job bro! nak tgk final pic nih mane2 hehe

lolz.. bro u using ziptie to mount ur radiator o.O?

nice job on the sleeving thou

oh, that's how u apply the thermal?

black and white!!!!!!same theme with m current modding project...

boleh...nanti jadi habu kalau sy sleevekan...hik hik...nanti aku shoot gambar lagi...meja masuh berselerak ni...kene kemas sket2...


nope bro..using skrew driver on fan to tighten radiator... skrew --> fan --> rubber --> on top, radiator... the skrew tighten on rad...btw, the cable tie that u saw if for my ccfl..


1st phase like that..then 1 used plastic like credit card to make a thin surface of it.. there is no piture of that...sorry coz not much taking photo..


thanks bro... stay tune for more picture..

---

Added on April 25, 2011, 8:12 amhere we go...!!

The CPU block...


The radiator...


The reservoir..


The pump...


Winova ram in action...


The lovely mobo...


The Fan....


This post has been edited by jungle_boy: Apr 25 2011, 08:12 AM

pehh,bro,,trbaek ar, ,nnti leh ajarkn aku nnti setup wc tu,hu3,,bro,,tlng sleeve kan psu aku bleh,,he3(tlg berbyr )

smart rig

thanks bro...hehe...kalau rasa psu tu nk jahanam, leh la aku sleevekan...kih kih kih...btw bro, aku nak ajar pun tak baper reti sangat....sebab aku nyer sleeving beginner bro... btwm bro punyer fully modular ke...? kalau nak aku sleevekan, free, leh je...tapi, antar sekali alat buka wayar tu laa...kih kih...pakai stepler, penat oo...

thanks broo...

btw...more picture update...!!!! and sorry coz no leak testing picture... ghairah setup until forgot to take picture.. and notice, all setup is complete...









sorry for my noob skill in photography...

This post has been edited by jungle_boy: Apr 25 2011, 02:59 PM

inilah org kata tarzan maju..tarzan zaman baru..hehehe

can u please borrow me your pc?lololololo

awesome la...sleeving pkai precision screw lg sng....

really nice bro!
i want to watercool my pc too, but sadly i dont have enough skill..

impressive~!!

very nice K62 wc setup...my previous K62 wc also not as cun as this...impressive bro. good work. nicely done!

thanks bro... btw, pakai precision skre tu camne bro...meh ce citer kat aku..mane la tau boleh buat..

thanks bro... to be honest,i'm also zero skill on watercooling.....before setup, choosing the right component also take me month...and each component, i ask seller...water flow, figure and all..he will happy to help...no worry... btw, at lowyat.net, we have
Lowyat.Net Watecooling CLub...any question or help,can be ask there..they all so pro and can give better idea on watercooling...feel free to join us...

http://forum.lowyat.net/topic/1493133


thanks broo...

thanks bro aka sifu watercooling.. for those who own this case, be proud man...

btw, this is the secret, why i choose this casing.....

top cover fit nicely to cover radiator...no need to major mode...cool huh....?


front cover after all fit in...no one will notice this case in watercooling if see from in front


Tadaaa..all watercooling component fit nicely into this mid tower case...


some close up the side panel....


and last, the Night View Mode....





thanks all... that all for my update... feel free to comment and critique....

macamana casing jd itam plak ni?semburkan casing aku la...........

bro...yg tu view malam la bro...mmg la nampak itam... ...bro...jgn nyesal suh aku sembur...

yet another impressive looking case
haha..
i'm sure u're fully satisfied and won't be able to sleep day n night
bcoz of the stunning view of ur beautifully done casing and its components

nice job bro! rig yg superb + pic yg awsome! = godding

.... thanks bro..

thanks bro...

can pm me what type of ccfl you are using looks nice the effect

This is amazing.. I loike

im using lamptron ccfl..bought from lingloong...

thanks bro....

wah... so nice

really impress with night view. damn awesome

good job.. i like

bro,,nk tgk setup yg latest,,meh ar ltk kat sini,,yg siap gpu block tu..he3

wah dah ade gpu block ker... up laaa pictar...

terbaik la bro! cun.. bole ajar aku nie... brapa meter ko beli sleeving 2?? untuk sleeve psu and wayar2 yg lain?

mane pictar gpu block..?

bro.xsembur monitor tu jadik putih gak?baru ah awesome sume putih.hehe

nice worklog u have bro.. i m still thinking to paint my casing (corsair 600t) with theme black and bright yellow, but dont know where to start off.. mind teaching me in the year end holiday? pm me if u are willing to... nice to meet u there... ^^

Mana ini orang hilang?

wish i could do like that.

nice!

wow bro, looking good =)) finally begin to wc =D..

Very smart and clean build. Love it.

nicely done.
your rig surely looks cool