UGPM

bro,

victor here, remember me? kelisa guy.

the MO2 10-30 or 10-40w ok for my car?

I tested MOS2 leichtlauf 10W40 + Liqui Moly Ceratec

Seller of course good. This is not first time deal with him. The oil + ceratec was probably the best combo i've tried so far. Engine idle much better, noise and vibration drop a notch. Performance gain probably too little to be notice by me. Will continue with MOS2 leichtlauf. The most i like is its cheap

Did you do engine flushing before adding those?
TQ.

yes he did. he's a regular customer so he knew the capabilites of the engine flush already.

This is the first time he's using the ceratec and LM10w40.

Thanks White Lighter for the feedback

have a free time to write up comment on ceratec.

tried it after putting in revo for <100km

before this my engine sounds more like a diesel very rough sound and its a new car barely 2months.Told elton want to try his new stuff,after 15-20km pour in ceratec i can definitely hear less sound from my engine almost gone actually..

so guys go ahead,imagine a 2 month old bmw also bising quiet after pour this thing.

Great product! Regular customer

Soon the oils hehe

Bro,
i might get those this week.
now, still can't decide either to take 10w-40 or 15w-40.
i afraid, if i take 10w-40 will harm the engine.

UGPM!!!.

tq.

This post has been edited by xphr3ak: Jun 1 2011, 10:12 PM

yup.. flush with lambda from elton oso one day before i service~

What is your car and how old the engine?
TQ.

it's a 02-03 Waja, 4g18p.

Thanks ThunderGod_Cid.

*Don't forget arrr.. I see u at BHP

---

Added on June 5, 2011, 1:50 pmJust pourd the Liqui Moly 10w40 to my Sentra B14 (1996).
Before, i use Shell Helix H5 15w40 (mineral).

Pros:
- Reduce engine vibration
- Reduce engine sounds
- Good timing when idling.

Cons:
- i loss the pickup than before.
- have to push the the throttle harder to maintain 80km/h
- when cruising >120km and release the throttle, the speed will significantly reduce. (feel like u push the brake a bit).

Whats the cause?
Vicosity than previous engine oil?

Shell Helix H5 15w-40
Vicosity 40c = 105.4
Vicosity 100c = 13.9
VI = 132
Flash point = 220
Pour point = -30

Liqui Moly 10w-40
Vicosity 40c = 98
Vicosity 100c = 14.4
VI = 152
Flash point = 220
Pour point = -34

Thanks.

This post has been edited by xphr3ak: Jun 5 2011, 03:01 PM

hey, do u sell LiquiMoly Top tech 4300?

Oil is slightly thicker due to it's MOS2 properties whereas the previous oil you used doesnt give you ANY protection especially during high speed and high revving conditions. Let it run awhile and set in your engine first

thanks elton 4 ur reply.
Good to hear that.
Im soooooo relief.
Thx.

bro,

wanted to try this for my myvi:

Liqui Moly Ceratec (Ceramic micro particles) 300ml, good for 5litres of oil RM169

is it safe for ngv usage?

pm me.

thx

free bump for you cid.

a honest guy there.


sorry..cid

couldnt get the Liqui Moly black oil from you.

doh,my dad bring my car go to service never inform me. awww...


the next turn,i will try this product out

bro do u hav this :
Liqui Moly LIQUI MOLY Pro-Engine M600 SAE 5W-30 50400/50700
Liqui Moly LIQUI MOLY Top Tec 4200 SAE 5W-30 50400/50700

hows ur car now ?

problem solved after re-tuning the engine.



Thanks.

---

Added on June 20, 2011, 12:39 pmbro,
what is LM mos2 10w-40 change interval?
5k or 10k?
tq.

This post has been edited by xphr3ak: Jun 20 2011, 12:39 PM

Bro,

Do you offer maintenance service which other than purchase lube?
Or you can recomm workshop for me to replace lube.
I would like to take semi 10w30
thank you.