today accidentally cut my RG zaku front skirt ball joints....

crap...

no, and i dont have glue too...i guess had to get another box set then cut the 2 part out then sell it as spare parts.

anyone interested? since i just cut out the 2 parts only...

This post has been edited by Agito666: Feb 27 2011, 01:25 PM

dun have other tools to repair... no drill...wait, dont think glue can fix it since the ball joints is too small and hard to fix.

This post has been edited by Agito666: Feb 27 2011, 01:36 PM

well i just collect RG only...other figure or whatever bla bla i not collect... next RG Strike will be in april...gonna get that too

---

Added on February 27, 2011, 1:51 pmhere is the front skirt i accident cut off...

supppose to cut like this....


original look before cut, looks like you also had to cut the balls right?


the instruction is blur blur one...you dont notice the balls unless you read it for 5 times...


This post has been edited by Agito666: Feb 27 2011, 02:01 PM

just get a new box better haha... fixing it i had to go get a small drill and a very very thin wire to "sumbat" in between it.... and summore the wire width only can 0.5mm below and length is like need 0.2cm or below

screw it...i dun have tools....

ohh good technique..but i also had to go to hardware shop to get those material...

---

Added on February 27, 2011, 2:21 pmRG is quite good for me because 1/144 scale... not eat space of my table...and detailedness is top notch...and i like the concept of RG frame instead of MG or PG since when we assemble gunpla we actually not really show off the inner frame also unless you got mod the gunpla to battle damage then you need to get detailed inner frame la.

This post has been edited by Agito666: Feb 27 2011, 02:22 PM

thanks for suggestion but i think just get a new box haha...because i live in rent room and dun have really many facility to do those haha

due to last time RG experience...i thought the ball joint had to cut due to the size is small like need to cut

in my experience the ball joint should be bigger size.....

This post has been edited by Agito666: Feb 27 2011, 04:23 PM

ya thinking of that, get another box set just cut out the2 parts i wanted then resell, if nobody wan then i just assemble into another zaku without skirt.

wait i get new box first then i inform see who wan COD hehe..

wait i wonder can use iron to melt plastic or not...PS plastic... ..

but scare later iron spoil and smelly...

that's why i ask lol... well 99% leave it there... actually i got an idea..instead of stick back the ball i just need poke a whole and use a wire poke through the skirt and make it can bend like the rear skirt... scare later cannot move lol.

i draw later if no one get the idea..

---

Added on February 27, 2011, 5:28 pmwhat is that
i m noob here... built a MG RX78-4 , 2 tv 1/100 grade then stop for years until i read reviews of RG line then i start back since now i work...

This post has been edited by Agito666: Feb 27 2011, 05:28 PM

okay...

in my memory gundam's balls are even bigger than zaku both same RG....

is 2 front skirt and i cannot repair my self since i dont have the skill and equipment here...since i rent a room only.

even i got strong glue i scare i broke soon because i play a lot with gunpla... i mean after i assemble and i used to be move it a lot

---

Added on February 27, 2011, 6:33 pm

the ball joints is so small until i think it is impossible to repair myself

This post has been edited by Agito666: Feb 27 2011, 06:33 PM

holy crap what the heck is this...SEED universe?

lol HUGEEE difference in term of price.

head 1 , 2 gn drive, and 2 leg.

get RG

---

Added on February 28, 2011, 9:51 pmmy RG shots.... OI DUN DISTRACETED BY MY DSKTOP WALLPAPER!!!!




This post has been edited by Agito666: Feb 28 2011, 09:51 PM

more RG spam pic


Shot by n8

the last 2 is what?