Thank you Benny -- you're the man.

After reading your comments, I took the plunge ie upgraded to Roto V4 JME. Need a few days to test ,so far so good.

I guess you must be tracking the development of paul o brien's ext4 kernel & rom --too soon to flash ? What are your thoughts? rgds, dave

Found this on xda for you.Hope it helps.

The phone --!-- computer problem is solvable.

Power off your phone, and power it back on with holding the volume down button, when you see the --!-- sign release the buttons.

You are now in download mode, although you cant see the little android with the shovel. Connect it to a pc with an odin 1.7 open and you will be able to reflash it.
                       

I was on jm4 from kies.Triedto flash modaco kernel, ended up with the pc/phone sign.Flashed to roto v4 full. Then patched with the chainfire/roto app.
Flash to modaco kernel which worked. Hope this helps.

Since things are looking slow here thought I'd post. Remember one of you asked about the SGP neo stand. Well, i'm using it. Costs USD 52 incl shipping. Think it looks "cute" but will break if dropped. A couple of photos below (sorry, i'm crap at taking pictures)

@Benny : Still no stable gingerbread , no sign of honeycomb & no stable OC kernel over at XDA tab --Bad.

A belated Happy Lunar New year to all.


Attached thumbnail(s)

The thing which impresses me about richard trip's kernel is the smoothlness when scrolling and pulling down notifications and how light it is when scrolling up again. Was on v10 for a no. of days with sensor isdues until this am to v13.

I got mine from here :http://forum.lowyat.net/index.php?act=ST&f=72&t=1438160&st=0#entry34017199

cheap and good.

My 2 sen. Switch to Overcome 1.13. Bluetooth is still weak (hard to detect) but once paired it works well. I think the JMx modems have got problems. You'll find that many including myself switched from Modaco rom to Overcome because of connectivity issues .

Since you're already on modaco kernel, place the the overcome zip file in external sdcard. Go into recovery mode and install the zip from sdcard. Once done ! , reboot. I actually use Quick Boot from market for going into recovery and switch off/reboot instead of pressing the buttons.

@kelvin-tan : Well I was on overcome rom with modaco kernel, played glow hockey (stupid game from market) and it lagged.Have gone on to richardtrip's oc kernel and playrd thegame without lag.Don't have need for speed now so don't know if there's an issue with overcome rom/modaco kernel. Maybe shinzan can try. Rgds,dave

@ Benny : Yes, still on richard trip's V13. And yes, battery is hot. Been playing with UV app.Think at -100 mv for all except 1ghz and 800mhz at -125mv does achieve lower temperatures. Idle @ 29deg and peaking at 39deg when charging. It's at least two deg. more if set at -75mv throughout. I don't use setcpu on demand and schedules --it's very complicated as it is. As for battery life, seems ok although we expect less battery time from a single charge.
All this is probably much ado over nothing while we wait for honeycomb.

I'm using Miren browser now.Think it's great for moving back and forth pages and for moving to the top bar.

@ Myser : Yes, all sensors working with v13. Notice you're on koxudaxi's kernel --which version? Which things don't work? Tempted to try but this is one confused geek --can't even get his version numbers right.

rgds, dave

wow.it means you now have galaxy tab 2.

LOL your problem has gone global. Just flash modaco kernel using odin.Then you can update to overcome with cwm.then trip v15.

You tried to switch from koxudaxi's kernel to trip's v15 straight away.You should wipe all caches, flash the modao kernel to properly set up cwm (if you have read thru koxudaci's thread you would have figured he has a problem with cwm) then use cwm to update to trip's v15 kernel.

When you flash the modaco kernel with odin, you should be fine.remember no rpartition and no pit.
Actuslly i think it's maxis problem.For me jk2 rom was very good with respect to connectivity.others swear by jk5 euro rom.Maybe flash to that first then move on to modaco kernel and maybe modaco/overcome rom.Your baseband will stay.I'm on baseband jma--don't even know how i ended up with it. Hope i have helped.

Somebody wrote on the xda thread that camera360 can work.Is it true? What about bluetooth? It has been a while since the rom went public.what concerns me is lack of progress.There hasn't been a single update.Looks like the OP is stuck. Rgds.

I was on v13. Early this week,while the temp read 37deg, the phone became alarmingly hot(the top right side)-i mean the kind of hot where you put yourhand on screen you would instinctively pull it away.when the temp read38deg,the screen became even hotter. Obviously the temp sensor has incorrectly read the real temp. Even w ith battery temp at 40deg, the sreen normally doesn't feel that hot.

Anyway I used set cpu to max it to 1ghz without uv and the screen temp dropped. Later when i set cpu to max at 1.2ghz,the prblem came bavk again. Forward to koxudaci kernel,v15 and back to modaco's kernel.
Think the scren is cooler with koxudaci's kernel though.

So take care.

@myzero
you think i didnt uv?i had everything at -200mv.

From some scientific formula or trial and error?

I had the same issue when i switched to modaco kernel.The temp was stuck at 30deg.Didn't bother me since the screen was cool.Have switched to koxudaci's kernel --temp fluctuates, don't know if it's correct but screen is cool regardless of settings which is the important thing.

So, clearly not hardware issue Spiroth. Maybe wiping all the caches and battery stats in cwm might help.

Perform hard reset.

Press and hold power key until reboot.