Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 LYN Proton Saga/Iswara Drivers' Forum! V23, The first Proton car in production

views
     
daredevilcsl
post May 5 2011, 07:40 AM

New Member
*
Junior Member
9 posts

Joined: Aug 2006


QUOTE(sinister_sid @ May 5 2011, 04:00 AM)
blink.gif
check around see whether got hose disconect around ???
this egr thing not to good with it
my both saga are old non egr 1


Added on May 5, 2011, 4:02 am
engine knock = incorrect timing , fouled spark plug , plug cable , distributor cap worn out , incorrect carb setting , distributor unit kong
*
did that but didn't seem to have any other lose hose for me to connect to....any other workaround?
daredevilcsl
post May 12 2011, 12:26 PM

New Member
*
Junior Member
9 posts

Joined: Aug 2006


Hi guys,

is it possible to get replacement for the meter top cap? as mine is melted as you can see in the pic...now is getting even worse as the gap is bigger and bigger...now starting to hear some noise of thing loose in it....
Attached Image
daredevilcsl
post May 13 2011, 08:09 AM

New Member
*
Junior Member
9 posts

Joined: Aug 2006


QUOTE(Peekab0o @ May 12 2011, 06:14 PM)
Should be replace-able cause its remove-able gotta go ask shopsss . Maybe you can try CT Auto in Taman Tasek see if they have it or not . Phone No . 07-232 0000
@Lowen maybe you can try call search around auto spare parts shop at your area ?

PS : I notice got quite a few saga/iswara members from Johor Bahru too ..

Wanna make a TT for our JB side ? brows.gif  brows.gif  brows.gif
*
my fren manage to help me get the replacement....now ordering from KL side....next week will reach JB side....total cost for that 2 bloody cap also need RM150...

ya actually alot but is just different area...if the time is right sure will join... smile.gif
daredevilcsl
post May 13 2011, 08:11 AM

New Member
*
Junior Member
9 posts

Joined: Aug 2006


QUOTE(Lowenkreuz @ May 12 2011, 06:01 PM)
Yeah, its annoying as hell lor!!!! mad.gif
seconded this. I'm also facing this problem now..... doh.gif
*
urs also same problem as mine? how long ur has been? mine almost 2 years and recently the sun is heating up terribly...so now getting worse and worse....
daredevilcsl
post May 13 2011, 09:05 AM

New Member
*
Junior Member
9 posts

Joined: Aug 2006


QUOTE(Lowenkreuz @ May 13 2011, 08:18 AM)
me is just lately baru got. when if the weather very hot, then when idling it will make the annoying kakakakaka noise cuz the plastic gap hit each other sad.gif
maybe i dun k la, just buy some tape and tape it enough. haha ppl got budget, i dun have budget. laugh.gif
*
initially that budget planned to do something else...now gotta delay becoz getting the cap as it will reach next week...haiz...

daredevilcsl
post May 13 2011, 10:32 AM

New Member
*
Junior Member
9 posts

Joined: Aug 2006


QUOTE(Lowenkreuz @ May 13 2011, 09:18 AM)
owww..... sorry if i have offended u. blush.gif
well, it just suck that happen to us right? but cannot complaint oso, at least we have a car to drive, which is better than walking/cycling in this weather.....  rclxm9.gif
*
nothing la bro...thought it would not be so expensive...till my friend told me the price i really jaw drop...is true la no complaint...30k u can get 1.3 with full accessories not a bad deal after all...just have to put some effort to make it better...
daredevilcsl
post May 13 2011, 02:02 PM

New Member
*
Junior Member
9 posts

Joined: Aug 2006


QUOTE(Lowenkreuz @ May 13 2011, 11:13 AM)
lucky you... I only got a n-line LMST, 2nd hand, from a girl who dunno how to take care of a car doh.gif
my one is really empty lah... oh ya, wanna ask u, does ur lmst the bottom part, below the stereng there got a panel to cover the wiring and stuffs? cuz mine is like if u tuck down, u can see the wiring directly and no cover at all. sometimes the wire will touch my knee also (sorry la, leg too long tongue.gif ). if urs got, u know how much is it, and whats it called? cuz i thinking of buying a panel to cover it from eon next time i go service... hmm.gif
*
same no cover....proton want to make it light...so alot thing take out...even the cover for the shelf on the passenger side...put thing all drop out....
daredevilcsl
post May 13 2011, 04:18 PM

New Member
*
Junior Member
9 posts

Joined: Aug 2006


QUOTE(Codyx @ May 13 2011, 03:52 PM)
no matter what it takes to improve performance performance performance and performance without giving a big bang on cash...something can be done casually..


Added on May 13, 2011, 3:54 pm
okok icon_rolleyes.gif
*
car jack and tools behind can be remove also if you want to remove spare tyres...
daredevilcsl
post May 16 2011, 08:49 AM

New Member
*
Junior Member
9 posts

Joined: Aug 2006


QUOTE(the_catacombs @ May 13 2011, 05:57 PM)
if its sufficient for u good la... cheap and cheerful maa....
if accident u gonna pokai even worse...
lmst very lightweight d... dun complain la... even saga iswara is heavier compare to lmst... try jacking an lmst and an iswara and u can feel the difference... let alone a wira, neo, or gen2....
i have approx 5kg of tools at the back together with spare tyre... still reluctant to keep my tools at home... i fee handicapped without my tools... experienced a few times where i need to do immediate repair by the roadside myself.... doh.gif
*
well is true enough sometimes those tools really came in handy when you need it...especially the road condition in our country is not really that smooth...if travel long distance some place are not so easy to find a workshop...so is better to have some basic tools


Added on May 16, 2011, 8:58 am
QUOTE(Peekab0o @ May 14 2011, 06:37 PM)
Hi daredevils LMST i saw you post something in KBM motorsports in JB for the Pivot Voltage Stabilizer RM 95 right ?

Must be imitation =x You installed that yet ? Probably can go together and try  brows.gif
*
installed already...been using about 2 weeks plus....overall is ok...stabilize the power, ice improve abit, smoother driving...to me imitation is good enough d la...as long as it does the job... smile.gif

btw i intend to remove the rear spoiler as it sagging down in the middle and how to cover up the hole for the spoiler? send back to paint shop and ask them to use those paint mud to cover and repaint again? or just use some sort of rubber and nuts to cover up? icon_question.gif

oh ya....recently found out that my muffler back end crack...so i plan to mod abit...my friend give me an idea....change the midbox to bullet and put another bullet to replace the muffler....how u guys think?

This post has been edited by daredevilcsl: May 16 2011, 09:25 AM
daredevilcsl
post May 24 2011, 08:40 AM

New Member
*
Junior Member
9 posts

Joined: Aug 2006


QUOTE(EnochKeng @ May 24 2011, 01:48 AM)
U stay at whr? Skudai go from pasir gudang always jam..those lorry all use that road - -" previously my car paint all got dented thx to those bloody lorry driver..sand and stone all falling to my car..reli pissed me off..

Btw, if u wan buy cam pulley better buy at diff shop or online..those shop Works and VIS all potong sg/jb ppl de..also they damn lansi wan..Works i can tell u lah, inside got nth but Simota filter range 400 to 1xxx and those intercoller which suit for R34 and so on..proton? maybe not in their list! Go skudai get the same thing half the price. trust me! VIS, dont ever step foot into this shop. vry lansi ppl thr..Pissed me off when i buy the silicon vacuum hose(4mm). bloody hell. i thought is samco hose. 2meter RM36 later only i knw is not samco.. - -" then they ask me take HKS RM90 wtf! Then he didnt layan me at all, even when paying..and the counter lady keep saying sorry! wtf? close shop lah..bloody hell..

If u reli reli wanna got works, let me knw, if I free i acc u go lor..but dont put high hopes into these kind of shop lah..they dont reli care about proton..even GTi go thr no face! lol!


Added on May 24, 2011, 1:56 am

Ok, thx for the info..short shift maybe later. This two months reli tight..haiz muz eat roti lol!
Can PM me the best price for Jasma and Samco radiator hose? Wanna check with my budget  sad.gif
Btw, durability which is better? U can PM me.
*
Bro u been to boostzone before in Johor Jaya? The people there are quite nice...one of them even driving the same car as us...i even chat with him on how to modding the car...quite a nice chap to chat with...their price wise is ok...normal market price...but can nego with them...
daredevilcsl
post May 24 2011, 09:58 AM

New Member
*
Junior Member
9 posts

Joined: Aug 2006


QUOTE(Peekab0o @ May 24 2011, 09:31 AM)
Where Where  drool.gif
Got website / phone no / address ?

@LKC : Mali kasi PM short shift and post post to JB  drool.gif comfirm mau mia .
*
http://boostzone.com.my/
GPS: N 0.153494 E 103.79231
Johor Jaya Ros Merah 2/7 if not wrong...forget the address d...person in charge Ah Thong...
daredevilcsl
post May 24 2011, 12:07 PM

New Member
*
Junior Member
9 posts

Joined: Aug 2006


QUOTE(EnochKeng @ May 24 2011, 11:26 AM)
IC, I havent been thr yet. Maybe next time will be thr smile.gif Is at the factory area right?
*
nola...is shop house area....but opposite is the factory...


Added on May 24, 2011, 12:09 pm
QUOTE(Peekab0o @ May 24 2011, 11:56 AM)
Thank you . Btw they have alot performance products right ? Thier website products link spoiled lol .
Enoch lets go .  brows.gif 
But wait la next month get gaji 1st  brows.gif
wub.gif  wub.gif  wub.gif
*
alot....they themselves own a drifting racing team also...so sure alot performance part....you may get to see their drift car also...

This post has been edited by daredevilcsl: May 24 2011, 12:09 PM
daredevilcsl
post May 24 2011, 01:37 PM

New Member
*
Junior Member
9 posts

Joined: Aug 2006


QUOTE(Peekab0o @ May 24 2011, 12:36 PM)
May i know what did you purchase from them so far .  drool.gif  drool.gif  drool.gif  Turbo Kit ah  wub.gif

Yeah saw at thier website the front page pic . Nissan Silvia orange colour that must be one of thier drift car .
*
only got the apexi open pod filter from them... smile.gif no money for turbo la...dun really like turbo also...still prefer NA smile.gif
daredevilcsl
post May 25 2011, 07:46 AM

New Member
*
Junior Member
9 posts

Joined: Aug 2006


QUOTE(Peekab0o @ May 24 2011, 04:48 PM)
Turbo no rike . NA rike  brows.gif
*
easier to maintain...turbo alot problem la...this wat i heard from old bird...

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0503sec    0.81    7 queries    GZIP Disabled
Time is now: 8th December 2025 - 02:15 PM