what size is that??.. does not seem like 3 inch...

this 1 kenot.....

guys, recently my belting started to screech at idling.

when there is load like turn on the aircon/radiator fan the screeching decreases slightly, but can still hear if i open the window. i applied some grease onto the underside of the belting, and the sound completely disappeared for few days.

now it's back and I'm looking for a more permanent solution.

It was 2.5 inch..should have get 3inch though..I done some mistake at the diameter calculation..

change new belt... tighten the belt tension according to spec...

Hi all sifu's can help register my name into this thread?

Driving a black lmst 2005 model . Thanks...

By the way i have a big problem with my air con during the afternoon . If i drive alone or with just 1 passanger not bad the air con quite cool but when 4 or 5 people ( including me ) inside the air con starts to come out warm air ( not cool / cold ) anymore any sifus know the reason why ?

Thank you all very much ya...

thanks for your reply. in the case that the tension was not adjusted properly, if the belt still looks OK then no need to change right? or could there be unseen damage to the belt already?

Sepa mau

---

Added on March 25, 2011, 11:24 pmChange to bigger compressor....Wira Denso compressor..all will set you back around RM500-600 but definitely worth it

Else your condensor not 'cold' enough...

This post has been edited by Notoriez: Mar 25 2011, 11:24 PM

http://www.mudah.my/Compressor+aircond+wira+1+6-8906633.htm


something like this sifu ?

Thanks...

belt damages can be inspected with proper inspection... if u just glance through the belt when its rotating inside ur car of coz u see nothings wrong...

kasi remover belt and turn terbalik and kasi bend alittle then see got crack anot lo

Bro i wanted to ask how much to change the timing belt ??? Normally how much it cost because got a shop give me the price at 250

what is the price for iswara rear bonnet gas lifter? anyone can help me buy ~~!.

120 buck ori mmc with tensioning bearing and 60 buck for aisin japan water pump (spare part shop price)
70 buck my forman charge me labour with change water pump
just change few day ago

---

Added on March 26, 2011, 7:11 pmmau i ask for u ???

This post has been edited by sinister_sid: Mar 26 2011, 07:11 PM


Attached thumbnail(s)

Attached thumbnail(s)

wah.....unker sid kena toto.....

Hey guys, i got a question, This mornin was driving on the highway, was doing
120km on the fith gear and revving high. Suddenly got burning smell
So i slowed down ... i suspect the coolant leak but im not sure...

And this mornin olso, i was going up the TOC entrance hill, stopped half way
bcoz the guard ask to , when resumed going up, i was on 1st,
clutch fully released and gas to the floor but the car moved slowly. I thought
the tyre was spinning, but my fren who was outside said the tyre didnt spin
and there was smoke comming out of the disc brakes smell like burnt tyre or sumthing.
I whacked my fren . I think my clutch got fried. or it could be related to the
one before

Any suggestion for a robust clutch? need one any way

Long time i didnt follow this thread exams. now got 20+ page to read

haha jus straight go buy for rm32 and fixed it. i heard rm35 can get 1 pair, but too bad my place wont be so cheap.

---

Added on March 26, 2011, 10:14 pmbtw, mayb u can ask and see hehe. so next time i can call and ask for ur help? ^^

This post has been edited by pitywoman: Mar 26 2011, 10:14 PM

120km/h=over high rev...than mean you must ready cash to change clutch coz sign of wear.......or clutch slips....


oh wait.....how much rpm when you go 120km/h??

including change the valve inside the coil and servicing?