SIN BAN HUAT>>>FB Account

Kun, izzit today 5.30pm meet u at 268 ?

zzzz Lot of people call me "kun" sia.. Itsuki = name.. kun = mate or called by girl.. =.="

Yes.. who confirmed want to buy RP.. just meet me at there..

Ok. Itsuki. Meet u there. Hehe..

---

Added on January 23, 2011, 5:17 pmguys, i reach 268 d. Mana u all?

---

Added on January 23, 2011, 6:12 pmitsuki, nice to meet u. Next time arrange a yumchar session ya...

This post has been edited by patrickloo: Jan 23 2011, 06:12 PM

how many people go there? Sorry just now i have thing to do, next time we yumchar 2gether..

You and Bizzy.. and then UncleCheang tomorrow.. another 1 MeoNRoX maybe I will help him pay 1st.. after 30 jan.. then he will pay me back liao.. now waiting for Aaron to give me his bank account number only..

Anyone used SKF Ceramic bearing in their LC? Any feedback?

And advice should I change the carb? I like to do long distance so I like it to suck slowly

Ya btw wat is the use of the bearing actually, alex...

oni gt few stuffs wor....hw bout any nice accesory shops???.....in kl???

---

Added on January 23, 2011, 11:21 pmoni gt few stuffs wor....hw bout any nice accesory shops???.....in kl???

This post has been edited by riderz135: Jan 23 2011, 11:21 PM

yesterday i just buy new full face indon from my friend.. rm270
and also a booster.. put at cable that connect to spark plug..
then today i go try at karak hway to kuantan..
manage to hit 140km/h just half throtle..

another link from budakmentah siggy

How is the blue light incoming voltage? Direct connect from battery?

---

Added on January 24, 2011, 12:23 am280...

This post has been edited by patrickloo: Jan 24 2011, 12:23 AM

Ya...i wan ask who in here hv changed their horn to car horn or other vechial horns??? Me maybe plan to add a Lorry horns or bus horns~

Itsuki add a car horn on his bike but rarely use it coz wanna safe battery from draining out so fast. Lorry or bus if not mistake is using air compress

---

Added on January 24, 2011, 12:48 amRejet the carb is better than changing an new carb. Currently Bizzy after cny only rejet the carb by alexei himself. Lc stock carb is already a gd carb to be play with le. About the bearing current active ppl at here hvn't see them do this kind of mod on his or her ride yet.

This post has been edited by 8zelk8: Jan 24 2011, 12:48 AM

So lorry and bus cant use lolz~but the car horn is damn siock ~ Its expensive??? Its just like same concept of a bike horns?

SKF ceramic is hard to find la bro..even i cannot find it for full engine bearing..2000k more and i will use SKF fibre engine bearing..major engine maintainance....

12Volt.. I connect to my headlamp's switch which I last time do a switch for on at night off at day..(sometime forgot on at night.. Very dangerous)

If direct connect to battery.. then wait die liao.. battery kong...

@bizzy:
I think they're talking about engine bearing here. In this case, it's only ball bearings. Bearings in general used to allow two surface to move at different direction with minimal friction. Example the crankshaft to spin while mounted onto the bearing inside the engine block, or the tire to spin while attached to the wheel shaft.
For normal application, higher speed use ball bearing, higher load use taper bearing, but taper bearing cause higher friction at high speed.

For race bearing, there are few things to improve in terms of material:
1. Fibre cage - to replace the normal steel cage that holds the bearings. The bearing and the roller cage is still using steel. SKF use TN9 as product code.
Refer: http://www.skf.com/portal/skf/home/product...&newlink=1_1_11

2. Ceramic bearings or ceramic coated bearings. Lighter, higher heat resistance, but max lower load than steel bearings. Example: SKF Enduro product line.
Refer: http://www.skf.com/portal/skf_id/home/prod...=192009&lang=en

Refer: SKF Bearing numbers for your Yamaha bikes - I think Jupiter is for LC:
http://www.skf.com/files/513720.pdf

This post has been edited by alexei: Jan 24 2011, 10:43 AM

@alexei
i found interesting read on explorer series..
http://www.skf.com/portal/skf/home/product...=867798&lang=en

better bearing?