Now I understand that.

I applied double sided tape on my rad to my box and taped the box to my casing. Hope this is clear for u.

Sorry guys, another delay on my project.
I promise to get back on track later.

2 things that delaying my project.
One is changing my precious proc and wait for the Aquaero 5(Already place order, eta mid Mar).
2nd is working out some job for my very very good friend bro Acther. You guys will see the result soon, either in this thread or a new thread.

Update coming soon....

Thank you.

Actually i source it from chilledpc UK together with my others WC stuff.

Hi bro, the 5870 gonna kicking in my rig later.
I think i have to rush up my project a bit, the gc are sleeping too long haha.

ha ha, coming soon...

Ya some cable cannot reach, have to extend some wire on it.

lol, i retire 1 year then come back again.
kena poison lo.

Hi guys, i'm digging up my old and long project again.
Lots of things to settle on last month, and most of the times i spend on the sleeving project.
And i'm spending quite some times to selling some hardware for 1 of my very good friend.
My time frame of own project really beyond my expectation or maybe i'm just a bit lazy on this.
Sometimes i just feel like not going to continue this project, but its a shame to have this kind of thinking. (i knew)
So this is the time that i think i'm ready to continue and finish it in proper way.
So this time i'm not going to set a dead line for myself, but i'm sure that all my hardware are 99% on hand now.
I expect my project can be complete before the "sandy EE" or "Ivy bridge" launch.
So today i'll just bring you guys some teaser shoot.
Not really have some real progress here, but just to show that my last piece of puzzle was arrived.

Here you go.

I'm proud to show you my newest, hottest and beautiest fan controller.

Brought to you by.....




And the real little b**** that let me wait for more than 2 months, but it worth for waiting.




Ha ha there is another brother that come along together.
Ya 2 units of Aquaero 5, 1 for me and another for my best friend bro 'acther'.




The backside of the Aquaero 5.




With the heatsink on.




The only problem is i received this beauty without software. lol
The Aquaero 5 software still under developing, its just like a body without soul hehe.
I ordered the black colour faceplate as well, they will ship to me later.




Thats all for today, the progress of assembly water cooling and computer hardware will coming along.
Thanks for dropping by...

Haha i'll do other parts first.

Ya Aquaero 5, you can get it from forumner "jibek".
For the price, i think you need to get a quotation from him.

Hi everyone, i'm here to bring you guys some update.
Today i connect some tubing on the water block.
Primochill 3/8ID 5/8OD tube on Bitspower 1/2 barb, without clamp.
Although its a bit difficult to push the tube into the barb, but the result come out quite nice.

Here is some of the result.

With the motherboard load on the TJ mobo tray together with my dual 5870.








I like the D-plug between both GC than crystal link.




1st tube on.




And the second tube.





To be continue... soon...

Thanks bro.

Opps, seriously i didn't mean it.

Ha ha sometimes a little bit poison is good for ur health.

Thank you.
I'm trying my best.

I'm glad to heard that u interest on some case mod.
I'm from Johor.

Hope you like it my fre.

Hi, today will be a short update.
I'm connecting the tube at the bottom compartment.

Here you go.



With the fitting on.






Tube connection on bottom compartment.




Here is my 355 pump with Bitspower mini tank reservoir.



Haha, I knew I'm running 2 reservoir.
My initial plan was to place the reservoir on bottom compartment, but it looks odd without any tube reservoir on murdermod style TJ07.
So I add another tube reservoir on top compartment and remain the little tank at the bottom hehe.

Thanks for checking in...see you soon...

Haha I used to stay in selangor for the pass 10 years.
Now move back to my hometown Johor.
Can't resist so many temptation there, especially on pc hardware spending.
But looks like it doesn't help either even I move back to johor.
(just kidding my friend, I'm enjoying on building wc pc)

Didn't get the mean by "space for expansion/tube expand"
Ya, only 3 fan for my quad rad.
I had to sacrify 1 fan for tube passing by.
I'm not sure 3 fans will be enough, but the scythe fan did push very strong air.
On top speed the fans are screaming, that's y I buy an Aquaero.
So have to test it and confirm.

Not pro la bro, we all learning.
Currently not planning another rad on it, the most is another 120 rad.
Depends on wat temp I get with this setup.


Ha ha, I wish I could.

Thanks, ya I'm from southen part kluang.

thanks bro, long time didn't meet u up.
How's ur life now?

I'm expecting next week to let the rig up and running.
Just simple trial run to make sure everything is working.
I think I better share the photo here, afraid u come to my room u will shock by terrible scene. All the tools spread all over the place.

Hope it will be fine, I'll share the result here when all done.

Yup, the word "tools" was exactly = "worn underwear"
And I afraid hilmi will not only shocking by the scene, he will also shock by the smell.
Btw thanks boss Alvin, I hope the final result won't dissappointed u.

No problem bro, I feel so lonely at johor here.
Not much wc'er here, or maybe there are some and I just don know.
My parent's house still at southen kluang, I'm also stationed at jb.
Would be good if some of us can gather for TT...sometimes.

I'm not sure about the PCIE slot combination, i just put the GC at the slot which is more convenience for me to water cool.
As for the fan, i'll check the temp 1st then only see whether i need to add the slim fan or not.
Any way thanks, for the suggestion.



Ok, today is a big day for me.
I just complete all the tubing connection, so it's almost done regarding my project log.
After this there will be nothing much to show you guys.
Just simply test run, everything running fine.
I would not show the temperature right now, maybe some OC result when my project is totally complete.
So be prepare, there were no more "very interesting" picture after this update.

The remaining things to be done are cable management and cutting the side panel.
As for the front panel, i think i'm going to use back all the original TJ07's bezel.

Here you go, i might shot better picture when all is totally done.
Just cant resist to shot few picture 1st and share with you guys.

here you go:

Place the mobo tray back into the case.





With the EK res in place, seriously it really looks weird without the tube res inside the TJ07.






Last tube connected.
So the WC section at this project should ends here, suddenly feel a bit miserable.
Will continue with cable management, next update should be a weeks or 2. (hopefully)






To be continue.....not so soon.....
Thanks for viewing.

Thanks, it should be tidy coz all the cable haven't connected yet.

Thanks bro, sure no problem if got any TT section.
Really like to meet all the WC'er all around this area.
BTW u from Kluang also?

OIC, i'm not from bandar Kluang also. Can meet up for sure if we both got time.
My hometown southern Kluang, lots of oil palm can consider jungle also haha.
Ya, its a good idea using LED stripe. I can easily source it next to my work place, there is a car accessories shop.
Still thinking how to connect the LED stripe through my Aquaero 5.
Need to reduce the cabling as less as possible.

Hi everyone, its update time.
Today gonna show you guys the 1st attempt on my cable management.
Its not finish yet, but its a good start for me.
So no more talking, here is some of the picture.









The heatshrink of the 1st GC looks bad, i think i'm bending too much on it.








The other side of casing.






Thanks for viewing, have a nice day.

Haha, maybe i'll get luminous panel but want try the LED stripe 1st coz its cheaper option.
Those p-clip from
http://en.mdpc-x.com/mdpc-cable-assemblies.htm

Already pmed you.

Haha, our built are very similar.
Be frankly, the biggest diffrent is you are using spraying paint for your interior.
I'll always suggest powder coat for interior, its more durable and looks much more nicer.
But dont get me wrong, your case actually looks good, just a little bit touch up will be better i can see some paint actually tear off.
And time to apply new paint for ur PA480.
I saw you dont have any top support for your mobo tray, any reason for that?
I don install any hdd in my front bay, i use only 1 unit SSD. Ya only 1 unit 120GB SSD for me haha.

This pic looks nicer, perhaps the 1st pic is with poor lighting.
U must re-route ur loop order, coz gc with water block still not in place.
Need sleeve for 8 pins power cable as well.
Very powerful system indeep, i spot revodrive.

Opsss!!!