stasio , do you got changelog of p8p67 deluxe 1505 bios?

go for linx 500 run so far i dont have 1 time BSOD/crash in continuous gaming 8 hours ( back ops,crysis 2, shift2)

just let your pc run overnight la....

i dont know about prime, but based on my experience , linx will fail at 6.xx hours also.

because you using linx with new library, but look at your clock speed, i using 2500k at 4.5ghz can hit 124 GFlops, I think you should hit around 130GFlops,some time it gone down to 10x/11x but linx will stop at error.

i done it lol

for searching extremely stable setting, so far after 1 week using , still no face crash / BSOD

may i ask how to set 3500mb? only able to make it 3300, cause bro owikh claim more stress in normal mode compare to stress in diagnostics mode

---

Added on April 5, 2011, 6:38 pmalso wanna ask about the power saving feature.

when e8400 era, i oc after that i set EIST and C1E , when idle will drop multiplier and voltage.
sandy bridge i oc after that i set EIST , C1E and other power saving feature on. but only manage to drop multiplier. voltage keep constant.

is that i use offset to + my processor voltage instead of set a exact value then it will lower voltage when i idle? if not , what the use of offset?

This post has been edited by nncl: Apr 5 2011, 06:38 PM

oo... sry , overlooked

what clock you running? i can get 124GFlop at 4.5ghz (64bit OS ), 102GFlop (32bit OS)

---

Added on April 7, 2011, 2:01 pmowikh, i notice people at Intel 4.5GHz & 5GHz LinX Stable Club mention about AVX, so, what is AVX?

This post has been edited by nncl: Apr 7 2011, 02:01 PM

har? don't get what you mean? so you mean without HT on is higher GFlops?

o..thx for explanation.

aiyo, look clearly what owikh said , he mean ht off will get higher GFlops

please show us a full info about your setting, use cpuz to show cpu clock speed, ram clock speed etc. hard to judge ,because you only show a linx screenshot.

This post has been edited by nncl: Apr 7 2011, 06:01 PM

use magnifier also cant see

now i knew my h70 not tat sux actually , last time was surprise because saw you all using hyper 212 clock at 4.5ghz and get same temperature with my h70.

@firagaz, can you show you ram speed? cause i also clock at 4.5ghz now, how come i can get 124gflop but you only get 95gflop

walao eh, just watch news, our P67 board, discontinue soon, faster then ever. my p8p67 deluxe will go history soon. LOL

voltage increase due to you enable PLL function?

aiyo, if wan clock then don't scare, if scare then don't clock high clockspeed like this lo.
in my opinion , i think 4.5 compare to 4.9 not much different in daily using. i set it to 4.5 enough.
and for the voltage . as long as u don put 1.8 + 2.0v like that , no burn mark, intel 1 to 1 exchange to you within 3 years if processor faulty. what u scare?

---

Added on April 22, 2011, 5:14 pmbtw, may i ask what cooler you using to get 93c at 4.9 ghz ? quite good temp if you ask me. and what program you use to stress?

i using h70 with 2500k 4.5ghz linx already reach 82c, don't even dare to think about 5 ghz sure beyond 100c.

This post has been edited by nncl: Apr 22 2011, 05:14 PM

aim for 64 bit os 3.2gb to 3.5gb ram 500 pass, 20 passed is nothing, i tried 1xx loop fail 2xx fail 389 loop fail and 477 fail when ram less 0.05v, but after complete 500 runs , rock solid stable

ram not stable ,
try loose the sub timing if u wan high ram clock speed.

This post has been edited by nncl: May 12 2011, 02:35 PM

a shxt....... this new deluxe after flash bios the oc profile will lost.... i forgot my setting ad my old p5q deluxe after flash new bios oc profile still exist