Go to DIY shop or ACE Hardwares and look for Ambersil brand's "Label Removal". Spray a lil' onto a cotton butt and clean ur case. Try not to wet the join areas of the case. It might clean off the glue that holds the rubber and the plastic together. Just clean the spots that is dirty. Any dirt or stain will come off almost immediately. Be very careful with it. Good luck!

Go for Power Support Crystal Clear or SGP Oleophobic SPs. Don't ever touch the Invisible Shield.

SGD45 = RM110. You haven't add the shipping cost in. It'll be almost the same price. And get the case on the day you buy from GS. Don't you think?

Yes, they do.

Just use a scotch tape to tape the PS and lift it to peel of the film easily. How can it be so hard??

---

Added on November 22, 2010, 1:56 amDon't get the Capdase Crystal Clear PS, they tends to have rainbows effect to the screen.
Especially under tungsten/florescent lights. You won't go wrong with SGP or PowerSupport SP.
Hope that helps. Cheers!

This post has been edited by S4a: Nov 22 2010, 01:56 AM

SGP Oleo - I'm using one myself and am very happy with it.

Since September.
And all my friends found it very good and installed too. To-date, no complaints or whatsoever about the SGP Oleophobic SPs but praises of my recommendation to them instead.

This post has been edited by S4a: Nov 22 2010, 02:01 PM

Every individuals have their own point of view and ways of usages. Just like Lamborghini and Ferrari. The debates will never ends.

But for Anti-Glare and Crystal Clear, it's a different story.
For example: with today's technologies, more and more LED TVs are getting better and better with sharper, crisper and more vibrant colors.
And almost all of them are crystal clear glass panels. Almost none are anti-glare panels these days.
My point is, iPhone 4 now comes with Retina Display generating better picture quality providing sharper and clearer pictures. Why would you want to degrade it's features due to finger-prints and such? But it still ends with each individuals' choices to sacrifice the picture quality over finger-prints/glides or vice-versa. And the saga continues... Peace!

Where did you buy the case? Why cost so much?

Cannot be. I bought it at MacStudio @ LowYat for only RM139.
Unless they up the price for it being too popular in demand?

Yes, they do sell SGP products. But it's so much more expensive to buy it there. I'd advice to purchase it at the Garage Sales here in the forum. Cheaper and they deliver to you instead of purposely go park your car at shopping complex and waste so much petrol in the jam just to get a case.

Went to MacStudio earlier today. Yes, my buddy works there told me that they up the price for the SGP Hybrid Neo Series due to popular demands. But the rest of the products remain the same price as before and some lowered like the SGP SPs.

Yes, it does looked like that. But it comes with 2 x Screen Protectors that'll cost at least RM70 for the front and back + some accessories that added to an amount of RM100+. So, I think is quite reasonable to sell it at RM120-RM139. But higher than that is definitely not worth it.

It's not weird at all. Silicone cases is soft and stretchy. Dusts & grimes will somehow get inside the case and sits right under your 3GS. You drop your phone into your pocket, when you walk, it flexes and rubbed the dusts or grimes against the back of your phone inside the silicone case. That's how you get it. But you can always use a car polishing products to help remove the hairline scratches.

---

Added on November 25, 2010, 12:30 pmHave you actually seen it in real or just judging from the photos you saw?
Well, I wouldn't say it so soon without seeing the real thing.
IMHO, it looked alright when I first saw it 2 months ago. But personally I prefer the Vapor more as it's forms and functionality are carefully designed than just looking good. The Concave area on the right piece with the sim-card hole, is designed for perfect gripping when you hold your phone taking pictures or playing games. The deep gap on the left of the case keep away your fingers mis-pressing the volume button or sliding the mute slider. The bottom deep gap at the sync/charge/speaker/mic area, provides louder speaker sound and avoid bending and spoiling your original sync/charge cable head.

Btw do you realized that you don't get to see the back of the case installed from the pictures?
Cause it doesn't look that good. They uses the "+" head screws instead of Torx or Hex types like Vapor does.

Anyway, it's still up to each individuals' taste and way they looked at it.
Some like performance car with sport cars' looks and some just like the real sport cars. Peace

This post has been edited by S4a: Nov 25 2010, 12:31 PM

Once they update the order status to "Shipped". It'll take within 2 weeks to be delivered.

FYI, locally here, we already have a supplier starts offering to resellers 2 months ago.
Yes, Blade does looked good in those catalog photos. But all I can say is, it's different when you look at it in real.
Great! You can then give us all a better reviews when your items arrived and tested. Make sure you take more photos of both the cases wide and close-up. Cheers!

This post has been edited by S4a: Nov 26 2010, 08:23 PM

As I have mentioned it. There's already a local supplier who is bringing in the stocks for resellers.
You'll be surprised once it's widely distributed nationwide with Blades. I won't want to say it that loudly about which is going to be very common at the end of the day...

I've bought the iPod Touch Bubble 4 for my baby girl's iPod Touch 4 and it's perfect!
I tested dropping and throwing it on the floor and it bounces off without any scratches or dents to the device
Ehh... Of course I tried it with her functionless iPod Touch 3 (not the newly bought iPod Touch 4)

---

Added on November 27, 2010, 1:42 amThen it should be 90-99% than stating it as a 100% same. It's a bit misleading... Just my 2 cents

This post has been edited by S4a: Nov 27 2010, 01:42 AM

Peel off slowly by using a magic tape taped on the edge of the SP. You don't have to peel off the whole piece but lifting up on the area where you find bubbles. Use the magic tape to tape off the dust spots that have bubbles, on the screen and the under the SP. Then re-apply it again and again... It takes time to apply it, so be very patient. Make sure your surrounding is clean and not windy or under the fan. Best place to do it is in the shower room, after shower (Don't work on any wet surfaces. Remember to place a towel under before working on it). Hope it helps! Cheers!

Well, some says... But don't you think that at least you have the oil resistant coating on your SP than those totally none at all, just plain crystal clear SP? So, what if it wears off? At least you still have the crystal clear SP there. You'll only replace it if got scratched. So, you shouldn't be too worried about it. So does every SGP Oleophobic SP owners like myself.

For the bubble at the bottom left of your phone. Well, if you let it be as is, it should be fine after a day or two.
Or if it still persist, you can gently use a magic tape to tape the area that caused the bubbles on the screen and under the SP, then apply it back. That should do the job. You can find some good tutorials in YouTube for applying SP if you want to see how it's done. Cheers!