QUOTE(kuchikuchi @ Oct 26 2010, 04:37 PM)
Possible launch: 18 November 2010http://www.mobileworld.com.my/v3/news/778-...es-in-2011.html
YTL Wimax launched?
|
|
Oct 26 2010, 04:52 PM
Return to original view | Post
#1
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,734 posts Joined: Mar 2008 |
QUOTE(kuchikuchi @ Oct 26 2010, 04:37 PM) Possible launch: 18 November 2010http://www.mobileworld.com.my/v3/news/778-...es-in-2011.html |
|
|
|
|
|
Dec 13 2010, 09:41 AM
Return to original view | Post
#2
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,734 posts Joined: Mar 2008 |
QUOTE(lowkl @ Dec 13 2010, 12:38 AM) you asked: It looks like public IP address range here: 183.78.x.y. Probably Yes is like Streamyx, offering public IP addressing scheme to each YES modem device.When I do an IP lookup, I get: Reverse DNS: [No reverse DNS entry per ns0.ytlcomms.com.] Reverse DNS authenticity: [Unknown] ASN: 45960 ASN Name: YTLCOMMS-AS-AP (YTL COMMUNICATIONS SDN BHD) IP range connectivity: 2 Registrar (per ASN): APNIC Country (per IP registrar): MY [Malaysia] Country Currency: MYR [Malaysia Ringgits] Country IP Range: 183.78.0.0 to 183.78.127.255 But, to be sure, you should type at the DOS command prompt the following command: CODE ipconfig /all Check an entry with YES device's network interface. This post has been edited by eclectice: Dec 13 2010, 09:45 AM |
|
|
Dec 13 2010, 10:29 AM
Return to original view | Post
#3
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,734 posts Joined: Mar 2008 |
|
|
|
Dec 13 2010, 10:40 AM
Return to original view | Post
#4
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,734 posts Joined: Mar 2008 |
QUOTE(aztech @ Dec 13 2010, 10:39 AM) it looks like a good dynamic public IP. tempted to to subscribe -- but still hesitated because of the PAYU style. I definately can't control my usage if the speed stays like that... Good enough to those who wants to host a mobile server..In my case, I can use it for OpenVPN server on the go...on and off when necessary.OK...I am lazy to backtrack all YES posts in this forum...is YES router/modem configurable (such as we can do port-forwarding, etc.)? Hmm...I've checked the website about Yes Huddle...it's not so interesting...nothing that can be configured with it... http://www.yes.my/portal/public/ytlc/store...ges/moreDetails Eureka! Someone's blog reveals an interesting piece of info: QUOTE All YES customers get a public IP (IPv4). 183.78.x.x is your IP range. Some geolocation databases seem to be service up incorrect ads for the region, but it should be noted that APNIC has allocated the range of IPs to YTL Communications. The Huddle allows port forwarding or setting a DMZ host, so it is probable that you could run a server behind your YES connection; I am still unsure if your IP is fixed or dynamic, though so far I believe I’m getting the same IP on my Huddle. http://www.bytebot.net/blog/archives/2010/...ial-impressions This post has been edited by eclectice: Dec 13 2010, 10:57 AM |
|
|
Dec 17 2010, 01:54 AM
Return to original view | Post
#5
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,734 posts Joined: Mar 2008 |
QUOTE(tanhks @ Dec 15 2010, 04:28 AM) If it is global ip, it is possible to use YES GO dongle to host a server already(without the need to do port forwarding, virtual server setting). You can put a dedicated software firewall, proxy service or network filtering service like NetLimiter on a PC that becomes a DMZ host.. Usually, a DMZ host is set for the purpose to become a filtering gateway (for general user) or a honeypot (for security researcher). All other PCs will go to this DMZ host instead directly to router switch. IT is like a buffer zone between WAN and LAN if configured correctly.Because when you use YES GO dongle, it is just like the adsl router/firewall with the server's ip moved into DMZ zone.(correct me if i am wrong) Any computer/server that is in DMZ zone is not protected by router's hardware firewall. That is why i don't want to use the USB dongle, i will wait until the wimax router is available. This is the note about DMZ in my Dlink router/firewall: "The DMZ (Demilitarized Zone) option lets you set a single computer on your network outside of the router. If you have a computer that cannot run Internet applications successfully from behind the router, then you can place the computer into the DMZ for unrestricted Internet access. Note: Putting a computer in the DMZ may expose that computer to a variety of security risks. Use of this option is only recommended as a last resort. " This post has been edited by eclectice: Dec 17 2010, 01:59 AM |
| Change to: | 0.0287sec
0.11
7 queries
GZIP Disabled
Time is now: 9th December 2025 - 02:24 AM |