i think the ankle joint looks good....its design is base on action figure like figuarts...allowing the leg to open wider to more cool action pose.

u....u........ i actually believed your bullshit dammit!!!!
i -10 u now D:<

but problem is, the joint gets loose and liek parody mentioned, it'll swivel. and tht's neither cool nor awsm

Well for me i dont mind...we got action base to support it wat

oh well.. maybe lo :/

for me (whose lacking space right now) i can only pose them standing in the almari. if joint loose, it's gonna cause me a lot of heart break and RAGE moments when it tumbles down and cause ALL others to fall down together

hi there well decaling for GFFN is simple just cut out the decal use a masking tape and use a back tweezer to rub it gently back and forward awhile and slowy peel of the masking tape with the decal plastic.

here is link and tutorial from ghost of zeon website for apply dry transfer decal.

http://www.ghostofzeon.com/diy/drytrans/dry.html

Back from Bandai Fair a.k.a. Bakuc Event @ Sg Wang.. =,= Bought a few Items though! :-) 1/3 of the event pictures had been uploaded to my blogspot.. Internet line was to be blamed.. thanks to Digi broadband.. lately was kinda like tortoise sped!

http://mynicholas.blogspot.com/2010/11/ban...ai-wang-23.html

I NEEEEED HARUUUUTEEEE!!

Last week suppost to go time square and buy myself a gundam...
but end up buying this.........



Turn out to be very good !!!! easy to asemble as the frame is fix..

*dun flame me*

pre-assembled inner frame is good
i wish Bandai use it on RG grade gundam so that i never broke any tiny inner frame

Gundam Rx78 OYW ver also got inner frame a... but need assemble too... most visible was the leg... just need to pull out some part and put the armor on...

RG wise.... the frame is still ok... for me the finger is a bit fragile.

The price will be increased if Bandai were to do that, since pre-assembled frames need manual labor, which is more expensive than the machine-only method used to manufacture gunpla (Kotobukiya used manual labor, thus you can see things like pre-assembled frames, or pre-painted parts in their model kits)

I build one before. The problem is that the inner frame is very flimsy. They get detach easily. End up I glue most of the inner frame parts. =_=
But none the less, I love their design, and easy assemble too

how much u bought yours. i found 1 in BTS rm133

chillax, lemme enlighten you a bit , Gundam Harute - Marute Mode is actually the Harute 'burst-mode' with the 6 red-eyed as seen in the trailer wan . Or like the picture below. Anyone wanna wait for a special version of the MG OOQ? who knows it'll include the Ring of Light that supports the GN Blades as seen at those earlier prototypes and included in the Robot Damashii OOQ

Harute is piloted by both Allelujah & Soma Pieres. So there's no dockable gundam within, or else we'd know already with the HG previews .

i think u saw it on BTS was the black shop "Time machine" but they charging 2% for CC...
i went to a new shop in BTS ... same floor as Time machine, XL-shop and "the new shop"
they charge me RM130 on CC....

---

Added on November 24, 2010, 11:25 amagreed... the waist area is a bit flimsy....have to be careful.... flimsy VS mobility ...
definately hope that MG will keep on improving their frame....

bandai have the most complicated leg frame... so far i see..

This post has been edited by blinky_w: Nov 24 2010, 11:25 AM

there's a new shop? is it the one located on the far left? near at the escalator there?

if near escalator im not sure...
everytime i go there, i will go tru the stair via the arcade area....
so i will see Black shop 1st, then next is XL then the New shop...

the new shop is actually the shop next to toy graffiti....

o- shit BAKUC. did i missed it already?




Kidou Tenshi Gundam UC [Destroy Mode] (Handsonic ver.0)

Finally, done Uploading all the photos .. for the first day of the Bandai Fair/Bakuc event at SG Wang, dated, 23 - 28 November . Cheers.

http://mynicholas.blogspot.com/2010/11/ban...ai-wang-23.html

nice. will going there this weekends

the MG Unicorn built is soo solid
even figma nagato can sit on it arm