What you mean go up?

Dear kunta,

Will do some testing tonight...as im looking for spi32m stable...

Components used :

AMD 1090T / Gskill Flare 18000 CL 9-11-9 PSC

Oppps...spi32m bencable on power chip....no bad at all...

2000mhz 8-9-8 w/ 1.65v

[attachmentid=2276325]

2000mhz 6-9-6 w/ 1.65v

[attachmentid=2276324]

Need to add how much?

---

Added on June 17, 2011, 6:14 pmJust now I have changed System multiplier: x16 3.2GHz, Bus speed: 200MHz, Voltage added: +100 mV. Now I can enter Windows. But after a few minutes BSOD occur: Machine_Check_exception.

What's the problem? Now reset default already. 

ayam slopoke but here i go

AMD phenom II x4 955BE deneb | 3900.3 mhz | ~min~ |TA790GX A3+ | TEAM Elite DDR3 1333 4GB| 533.4mhz | 7-7-7-27-27 | CM V10
[attachmentid=2292348]
[attachmentid=2292353]
[attachmentid=2292354]
[attachmentid=2292355]
[attachmentid=2292359]
[attachmentid=2292360]
anything i should add more? any advice? im newbie. what more can i improve?
this all i do according to guide at 1st page, will do Show your SuperPi/HyperPi 32M, Prime95 later

tighten mean something like 5-7-7-27-27 become lower to something like 4-6-6-26-26 like that? sorry i still doesn't got very much of the term

what that means?

what is 2k@7-7-5?

that 2000mhz is ht link?

i dun have kick ass ram can do tight timing... this is what i have... 

[attachmentid=2299582]

tenz bro..

plz guide me: 

wprime test completed... 1024M 403.947sec ( )

here are my max temperatures for:

TMPIN0 85
TMPIN1 68
TMPIN2 59

the max temp for my cpu is 70 degrees celcius isn't it? is the result ok or i should not go any further unless i go and get new cooler?

my cpu usage shows a clock speed of 3314Mhz...an increase of 14Mhz?

whats next?   

i have some questions here...my default voltage is at 1.4V and now i've change it to 1.35V as recomended...why there is an increase in cpu clock speed when the voltage is less? 

hey..i've xperienced this -->

"the system has experienced boot failures bcoz of OC-ing. last setting in bios setup may coincide with current H/W states"

current CPU speed : 16.5X 200Mhz
current memory speed: 1333Mhz
current HT speed : 200Mhz

Press <DEL> key to enter bios setup or press any rest of keys to continue

is this normal for OC? i've noticed that my pc took quite a longer time than normal before the beep sound (after pressing the power button) is this the result of boot failures?