Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 AMD® Socket AM2&AM3 Overclocking V24, Thuban or Bulldozer!? Its 6-Season

views
     
GAT-X105
post Jan 17 2011, 09:11 AM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


hi guys..can i refer to this post =
Basic guide - Overclocking a 939/AM2 : http://forum.lowyat.net/topic/625156
to overclock Athlon X2 5400+
also use the same software in the thread?
1) CPU-Z
2) Orthos (for stress dual-core CPUs)
3) Clockgen
4) Core temp
or got new softwre better than Orthos?

This post has been edited by GAT-X105: Jan 17 2011, 09:20 AM
GAT-X105
post Jan 17 2011, 06:19 PM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


QUOTE(ah_khoo @ Jan 17 2011, 09:43 AM)
i'd say prime 95 is one of d best tools for stressin amd chips. some prefer occt which is just fine to my book.  wink.gif
*
so i can use prime95 to increase HTT in windows too?
GAT-X105
post Jan 17 2011, 06:40 PM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


QUOTE(kuntawakaw @ Jan 17 2011, 06:33 PM)
waiting for ur review then... roughly, hows the board?
no..prime is a STRESSING tool.. not TWEAKING tool.. u can try AMD Overdrive to adjust ur HTT.. bare in mind, not all motherboard support AOD..but most new mobo support it.. even not all functions supported, most likely the HTT, multi and ram timings is supported..

or else use ur mobo's manufacturer oc tools
*
using Abit Fatal1ty AN9 32x mobo..
old scool stuff tongue.gif
btw..between Team Elite,Ballistic Tracer,A-Data ram which 1 is good?

This post has been edited by GAT-X105: Jan 17 2011, 06:54 PM
GAT-X105
post Jan 17 2011, 07:25 PM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


QUOTE(kuntawakaw @ Jan 17 2011, 07:03 PM)
http://game.amd.com/es-es/drivers_overdrive.aspx

sorry man.. just quote this to show some proof..

btw.. need more details on the rams u listed..
team elite older batch (someone bulking it long long time ago ) lies d9gmh/d9gkx (cant really remember) so if u got that legendary chip..id say that is the best..

for tracers, contains d9..but most of em are hot.i tried 2kits.. results not impressive enough..kekeke.and very few having chip i mentioned above..

adata.. not sure..kekeke
*
hmm..how to check the chip arr?

GAT-X105
post Jan 17 2011, 08:13 PM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


QUOTE(kuntawakaw @ Jan 17 2011, 07:34 PM)
the only way to confirm is

peel off teh heatspreader!!!
kekeke

user posted image
btw.. just seek at garage sale..see who still have these 2 d9s.. last time i lurk around 3months ago still have plenty..keke
*
kao..need to kopek the ram eh cry.gif
any idea which DDR2 ram surely got d9 chip? brows.gif

This post has been edited by GAT-X105: Jan 17 2011, 08:16 PM
GAT-X105
post Jan 17 2011, 11:45 PM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


QUOTE(kuntawakaw @ Jan 17 2011, 08:42 PM)
which d9? if only d9,
go buy crucial.. i think all of the kits is d9..
if u want promising d9, that surely is d9gmh, buy crucial 10th anni..

and..there are dozens of kits that equipped with d9.. just browse thru garage sale bro.. i just done that..and i saw few..

btw.. i believe all of these EOL already..so just buy any 2nd hand sticks.. that will do.
*
cool..thx for the info icon_rolleyes.gif
time to visit garage sales now moneyflies.gif moneyflies.gif moneyflies.gif
GAT-X105
post Jan 26 2011, 08:50 AM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


any of u guys got Crucial Ballistix Tracer for sell? or OCZ SLi-Ready tongue.gif
prefer 2x2GB..will come to KL early February to deal brows.gif
go go check ur laci..mybe got hiding there laugh.gif
GAT-X105
post Jan 26 2011, 12:51 PM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


QUOTE(cloudwan @ Jan 26 2011, 11:29 AM)
U want DDR2 ballistix or DDR3 bro? If DDR3 try asking ah_khoo about his hmm.gif
*
looking for DDR2 bro biggrin.gif
still using old mobo...

anywy,can refer my topic tongue.gif
http://forum.lowyat.net/index.php?showtopic=1732144&hl=
GAT-X105
post Jan 27 2011, 04:10 AM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


QUOTE(kuntawakaw @ Jan 26 2011, 04:13 PM)
lol..tikam.. yeah.the auto calculate is very important to me.. but somehow i have my calculator ready...kekeke..
bought a calculator for OC purpose back then when with biostar..and also the DFIs mobo need this calculator also..kekeke
making OC very slow and lembab..
ur kvr at that speed how much vdimm bro?

@gat
actually u need performance ram for what?
to "feel" the speed or to enjoy the overclocking?

or u really need that speed for some task?

for me, i cant enjoy ddr2 once ddr3 came out..
and also higher speed of ram, i dont really care went comes to daily usage.. i dont do any task that need a fast memory..kekeke
*
for both lol tongue.gif
just wanna find a good RAM for my mobo
my mobo been sleeping at "atas almari" for so long d laugh.gif
GAT-X105
post Mar 4 2011, 04:36 PM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


yo guys..this noob has back tongue.gif
just finish setup my rig last nite..

here my spec :

AMD Athlon64 X2 5400+ 2.8Ghz (Bristbane) with Hyper 212+ cooler stock fan* and Tunix TX-2 Thermal Paste
Abit Fatal1ty AN9 32x nForce 570 SLI
Mushkin 512mb DDR2 667 + Team Extreem 2x1Gb DDR2 800**
WD Caviar Green 500Gb
XFX Geforce GT240
Mushkin EB-500W (Dual Rail,22A @ +12 Rail)
cap ayam casing tongue.gif out of budget to buy new casing cry.gif

*i also got AC F12 fan to replace tht stock fan
**Muskin 512mb at DIMM1 and Team Extreem 2x1Gb at DIMM 3&4..cant put Team RAM at DIMM 1&2 bc slot too close with cpu heatsink

help me overclock it guys..also can i still refer to this link? http://forum.lowyat.net/topic/625156

This post has been edited by GAT-X105: Mar 4 2011, 04:42 PM
GAT-X105
post Mar 4 2011, 04:49 PM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


QUOTE(cloudwan @ Mar 4 2011, 04:44 PM)
Welcome back bro, yup u can still use that as a guide for ur o/c, happy clocking bro smile.gif
*
yeah..since my rig 'old' spec so i think just refer to 'old' guide too tongue.gif
time to install all the software icon_idea.gif
btw..Orthos & Prime95 just same function rite?

This post has been edited by GAT-X105: Mar 4 2011, 04:49 PM
GAT-X105
post Mar 4 2011, 06:31 PM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


got popup ClockGen Error "Unable to init the driver" doh.gif
any other software i can use?


Added on March 5, 2011, 4:10 amwrongly used 1.0.5.0 version doh.gif
downloaded 1.0.5.3 and no prob icon_idea.gif

This post has been edited by GAT-X105: Mar 5 2011, 04:10 AM
GAT-X105
post Mar 9 2011, 06:51 AM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


QUOTE(GAT-X105 @ Mar 4 2011, 04:36 PM)
yo guys..this noob has back tongue.gif
just finish setup my rig last nite..

here my spec :

AMD Athlon64 X2 5400+ 2.8Ghz (Bristbane) with Hyper 212+ cooler stock fan* and Tunix TX-2 Thermal Paste
Abit Fatal1ty AN9 32x nForce 570 SLI
Mushkin 512mb DDR2 667 + Team Extreem 2x1Gb DDR2 800**
WD Caviar Green 500Gb
XFX Geforce GT240
Mushkin EB-500W (Dual Rail,22A @ +12 Rail)
cap ayam casing  tongue.gif out of budget to buy new casing cry.gif

*i also got AC F12 fan to replace tht stock fan
**Muskin 512mb at DIMM1 and Team Extreem 2x1Gb at DIMM 3&4..cant put Team RAM at DIMM 1&2 bc slot too close with cpu heatsink

help me overclock it guys..also can i still refer to this link? http://forum.lowyat.net/topic/625156
*
*changed the stock fan to AC F12 PWM drool.gif idle at 18c-25c
**i removed tht Mushkin RAM and put Team Extreem to DIMM1 & DIMM2

ok my question regarding this thread http://forum.lowyat.net/topic/625156..
Things to ensure before OC
1) Your SATA harddisk is connected to a locked SATA port<--how do i know my SATA port locked or not? rclxub.gif
----- e.g. for K8N Neo2, SATA 1 & 2 ports are unlocked. Have to connect to SATA 3/4. If not, you'll get corrupted windows!!!

this guide is easy but since im a noob,kinda confius with my bios coz too much dtails..anywy,i giv u guys link how my bios look like icon_question.gif
http://www.ocworkbench.com/2006/abit/FATAL1TY_AN9_32x/g4.htm
http://www.ocworkbench.com/2006/abit/FATAL1TY_AN9_32x/g5.htm
really² need u guys help here icon_question.gif notworthy.gif
p/s: i only changed DDR2 voltage to 2.2v..otherwise its not stable to support my RAM..more info for my rig can check at my signature guys



This post has been edited by GAT-X105: Mar 9 2011, 08:21 AM
GAT-X105
post Mar 10 2011, 09:30 PM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


QUOTE(GAT-X105 @ Mar 9 2011, 06:51 AM)
*changed the stock fan to AC F12 PWM drool.gif idle at 18c-25c
**i removed tht Mushkin RAM and put Team Extreem to DIMM1 & DIMM2

ok my question regarding this thread http://forum.lowyat.net/topic/625156..
Things to ensure before OC
1) Your SATA harddisk is connected to a locked SATA port<--how do i know my SATA port locked or not? rclxub.gif
----- e.g. for K8N Neo2, SATA 1 & 2 ports are unlocked. Have to connect to SATA 3/4. If not, you'll get corrupted windows!!!

this guide is easy but since im a noob,kinda confius with my bios coz too much dtails..anywy,i giv u guys link how my bios look like icon_question.gif
http://www.ocworkbench.com/2006/abit/FATAL1TY_AN9_32x/g4.htm
http://www.ocworkbench.com/2006/abit/FATAL1TY_AN9_32x/g5.htm
really² need u guys help here icon_question.gif  notworthy.gif
p/s: i only changed DDR2 voltage to 2.2v..otherwise its not stable to support my RAM..more info for my rig can check at my signature guys
*
any1 can help me?since i saw many pro online atm sweat.gif
GAT-X105
post Mar 10 2011, 10:18 PM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


QUOTE(kuntawakaw @ Mar 10 2011, 10:06 PM)
ur question is like only 1 here..right?

i think that guide is quite outdated.. cuz i also dont even know any locked sata port..and none of my hdd spoilt cuz of oc..
so just ignore it i guess..
*
ok thx bro..i was thinking bout tht too tongue.gif
regarding bout my bios..actually which 1 do i need to touch? laugh.gif

http://www.ocworkbench.com/2006/abit/FATAL1TY_AN9_32x/g4.htm
http://www.ocworkbench.com/2006/abit/FATAL1TY_AN9_32x/g5.htm

example of my bios shakehead.gif

This post has been edited by GAT-X105: Mar 10 2011, 10:40 PM
GAT-X105
post Mar 11 2011, 04:09 AM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


yo guys..after study out my bios i slowly understand i realize this guide http://forum.lowyat.net/topic/625156 kinda old but still can follow tongue.gif
i did follow until OC in windows part which is need to run CPU-Z 1st.. =


OC in windows (This is where the fun begins!!!)
1) Run CPU-Z, ensure
-----core speed is 2000 Mhz
-----voltage (vcore) around 1.35v
-----HT link <1000 Mhz (should be at 600Mhz)
-----Memory frequency <200Mhz (should be at 133Mhz)

and this is wht i get...
user posted image

so wanna ask u guys is it correct?so can i strt increase HTT in Clockgen? icon_question.gif
really² appreciate u guys help here notworthy.gif
GAT-X105
post Mar 11 2011, 05:54 PM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


Example of my bios:
user posted image

On my bios i set :
-Multiplier Factor x14.0
-External Clock 230 Mhz

-CPU Core Voltage 1.3500v
-DDR2 Voltage 2.20v
-NB 1.2v Voltage 1.20v <--at default
-SB 1.5v Voltage 1.50v <--at default
-Hyper Transport 1.20v <--at default
-DDR2 Reference -30mv <--at default

user posted image

DRAM clock i change to DDR2 667 (bcause ths wht http://forum.lowyat.net/topic/625156 told me sweat.gif )

and here wht makes me confius rclxub.gif

user posted image

K8<->NB HT Speed i set to 3X (can be set to 1x to 5x)
K8<->NB HT Width i dont touch it,currently set to Auto (can be set <8 >8 or <16 >16)
NB-->SB HT speed i set to 3X (can be set to 1x to 5x)
NB<->SB HT Width i dont touch it,currently set to Auto (can be set <8 >8 or <16 >16)
PCI Express bus(PCIEXP1) i set to 100Mhz (as this guide told me http://forum.lowyat.net/topic/625156)
NB<->SB Reference Clock Auto(i dont touch)
the rest as example bios pic
NVIDIA GPU Ex Disabled

and this is wht i get atm..
user posted image

im just curious with my DRAM frequency now..is tht correct? whistling.gif
also why my FSB:DRAM CPU/9 <---wtf is this? doh.gif
appreciate any help here icon_question.gif
GAT-X105
post Mar 19 2011, 06:43 AM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


1 stick of my Team Extreem RAM fail..keep getting BSOD if put..donno this RAM can rturn RMA or not cry.gif
GAT-X105
post Mar 30 2011, 09:26 PM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


QUOTE(kuntawakaw @ Mar 11 2011, 08:36 PM)
well, tat is ok but if u want to oc ur ram then make it 800mhz..
u know how it works right the ram dvider?
which part u dont understand? if u not sure what is that, meaning that is an advance setting.. u can leave to default
NB HT speed - try to make it as close to 1000mhz
HT width - leave auto can, put 16bit can.. any option still can
those SB HT i donno.. so either wait for others to come or jus leave auto..
cpu/9 is ur ramspeed is ur cpu clock divided by 9 ( but u have to times back 2 to get the effective speed)
and if u can see that is not a correct figure u set.

the exact figure should be
at 200mhz HTT - ram speed should be  667mhz (333mhz will be displayed on cpuz)
if at 230mhz HTT - ram speed should be 767mhz (383 wll be displayed on cpuz)

but this is normal for older entry level mobo..but i donno ur mobo which level..kekeke

*
dont understand bc so many setting but since u told me its advance setting now i understand tongue.gif
NB HT speed - try to make it as close to 1000mhz = i get 9++
HT width - leave auto can, put 16bit can.. any option still can = i put 16x
those SB HT i donno.. = i leave auto since u donno whistling.gif

get same as my last SS but did prime test..failed doh.gif


Added on March 30, 2011, 9:28 pm
QUOTE(kuntawakaw @ Mar 19 2011, 08:12 AM)
he d9gmh? if RMA not guarantee same chip will come back  sweat.gif  sweat.gif  

*
weeeee..lucky the RAM still ok..yup d9gmh..i tested on my bro rig no prob at all..but donno why after last time oc,is put at my pc cant boot at all..
now i using his ram..last time i oc'ed my proc till windows corrupt,cant boot at all..now using new windows..
above setting SS gone,forgot to save doh.gif
ytd i tried again..this time did prime test 1hr+ ..success.. icon_idea.gif
i'll upload SS later..

This post has been edited by GAT-X105: Mar 30 2011, 09:32 PM
GAT-X105
post Mar 30 2011, 09:45 PM

Getting Started
**
Junior Member
103 posts

Joined: Jun 2007
From: Bkt Bintang


my latest OC.. rclxm9.gif
user posted image

On my bios i set :
-Multiplier Factor x12.0
-External Clock 260 Mhz
-CPU Core Voltage 1.3500v

K8<->NB HT Speed i set to 4X
K8<->NB HT Width i set to 16x
NB-->SB HT speed = auto
NB<->SB HT Width = auto

did primetest 1hr no prob brows.gif
the question is...i cant go higher than this..if i set higher,prime sure failed..why arrrr??
cry.gif cry.gif cry.gif

2 Pages  1 2 >Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0460sec    0.36    7 queries    GZIP Disabled
Time is now: 29th March 2024 - 01:49 AM