A lot busy with raya and no time online I guess...

Look at your remote, there's a button that look like this I-II press that once and press > arrow once to change the language.

I don't think you could do that at the moment, maybe next time during their next firmware upgrade maybe they will able to keep settings that we have set on specific channels.

Still Out of area for me.

Check @ your BTU

Connected 10 days, 14:48:16 So far so good

Silencer, this is what you need to do.

Connect your laptop/pc to Port 4 of your ZTE BTU 931

Manually set your laptop/pc I to 192.168.1.2 subnect mask 255.255.255.0, you may leave the gateway blank.

After that login to your BTU, via 192.168.1.1 and type in username and password = admin

After that, follow this screenshot below.

Disclaimer, I am not liable for any damages/down time caused to anyone. Do it at your own risk.

Port 1 (Connects to your router's WAN port)

Click on Advanced Setup > Vlan Trunk Setting

Then follow this screenshot.



Click Save/Apply

After this, click on the LAN Interface Select pull down menu on top and select LAN2

Tick vlan Trunk Enable and configure as per screenshot below

Port 2 (Connects to your IPTV)



Click Save/Apply.

Reboot your ZTE BTU and IPTV and Router.

You are very much welcome

I do not want to wait for the bill, i went to the unifi portal, sign up and saw my first bill, printed out the bill and paid online.

I do not want them to suspend my account due to payment.

Please do a search next time, I answered this question before.

Answer is Yes.

For condominiums installation, you'll use your normal phone jack.

Connection so far so good @ Puchong