Lol owikh suke bukak thread

Btw nice result there lichyetan... D9 is it??

This post has been edited by metsatsu: Aug 31 2010, 06:45 PM

yaa lor...dis thread I look just now at pg 2


me top out at



But daily is 4.1 on air only...cant stand the heat (on TRUE + Delta 120/38 push pull...)

This post has been edited by antonio: Feb 20 2011, 02:15 PM

R2E ppl...

do you guys ever encounter problems with the onboard LAN whenever you are on serious overclock settings???

I don't mean those tiny voltage increaments, I mean those >4.0ghz or those >1700mhz with >3400mhz uncore...

this is the thing that happens...previously everything is a-ok but as soon as I load my 4.0ghz settings, LAN becomes unstable...games DC whole night on me, FTP disconnected and slightly slow internet connection...is not slow in terms of the connection, its slow to 'start' the connection...once I entered a url and hit enter, i takes a second or two (maybe up to 5) before it starts loading up...

If stock, no problem..

another thing is, if I hook up fans on the 3-pin header next to the second LAN port, the port becomes unstable...symptoms as aforementioned...

Does anyone ever experience such problems, even not specifically on R2E...

Just woke up and check memtest test 8, and BAM!!!

everything is OK! 3600MHz uncore with 1800MHz ram

CPU at 2700MHz (not yet set to 4GHz)

Now I'm LINX'ing and will start online gaming once it passes all 200 times...

If still the onboard LAN becomes crazy, I'll have to go and buy a PCI/PCIe LAN...


Attached is my settings....

it failed...

Now....or just 3 hours before, I started LinX with a little bump of QPI voltage...like 0.3 more...as you can see from the pic, the QPI Voltage is now 1.42v

still kicking ok....


Attached thumbnail(s)

but I only got 2 sticks

owh well...i think I just go back down to 1600...coz with that i only need like 1.2v QPI

200mhz more and a wooping 2.2v extra!!! now worth it

no need larrr...u wont learn nothing there

better wait for the next tripchan i7

Last run...a slight bump on the QPI (0.25v) which makes a total of 1.45v for the system to be stable enough to run LinX at 3800MHz Uncore@ DDR1900..

Will save settings and load when i think i need to burn something

no larrr...actually my rig has been stock for so longg...now time for some 'workout' and 'stretching'

by the way, mine is not R3E...its R2E...the famous 'need high QPI voltage to run DDR2000@4000MHz uncore, sometimes need 1v more compared to other' motherboard

and i'm on TRUE..so it won't be long till i hit the 'heat' wall or my room 'hot' wall...

Yap...DOMGT not that expensive nowadays...but that DOM isnt the 2000C7 ones...its the 2000C8-9-8 or 2133C9-10-10

The finaleee....



Cant proceed... ....95c already... sigh...

have to settle for 4GHz 1580MHz then.... even that reaches 88c

i've already set to 1.3v before the test...well...mebbe its the LLC doing its job

Board? Same size or different??

my rams probably reach today 4GB CVR x 3 probably reach today...so might poke it all to get 16GB

btw, nothing to do this morning...



http://valid.canardpc.com/show_oc.php?id=1966315

Probably ram related error...try using a slower speed...less strain on the IMC and can pin point if cpu not stable at 1.375v

I ran once O/C vs stock consumption on my setup:

-i7 920
-R2E
-3 x 1600Mhz DDR3 C7 1.72v (IMC always at 1.425v)
-Seasonic 850W
-5970
-x6 HDD
-1xSSD

at 4.0ghz vs 2.66, the Arlec wattage meter I had showed just a mere <30w increase making the total around 280-300 at idle, at 2.66 idle was around 250-270 watts...

but when I swapped GPU from 5970 to the 4850, my idle went as low as 170W-190W (2.66) and 200-220 (4.0ghz)

so yah...no point save power on CPU...wanna save power...get a lesser GPU

1x gtc480 vs 5970 at idle on my setup is...i dunno how to soften the blow so I just cut to the chase....

Its the same idling wattage