SANDRA 2005 MEMORY OVERCLOCKING CHALLENGE, OVERCLOCKED MEMORY COLLECTION !!
|
|
 May 14 2005, 11:27 PM
Return to original view | Post
#21
|
 
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam  
|
where's TCCD users ?
|
Quote|
|
|
|
|
May 17 2005, 06:55 PM
Return to original view | Post
#22
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
QUOTE(Asus @ May 17 2005, 01:02 AM) this is mine on intel platform now Asus, will try higher later   what's the detail of this benchmark ? use the template pls......  |
|
|
May 19 2005, 02:50 AM
Return to original view | Post
#23
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
attention OCZ VX users.. ( OCZ VX Gold / VX Value )
some guide to burn in your RAM !! make sure u've got active cooling on it !! 8cm fan is enough IMHO.. also applies to Winbond CH5 UTT / BH5 UTT based RAM IMHO..  ****************************************************** quoted from RyderOCZ Hello, The PC3200 should set 200FSB 2-2-2-10 timings (CAS-tRCD-tRP-tRAS) with 3.2V and let it run memtest for 24-48 hours if you can let it go that long The PC4000 should be set at 250FSB 2-2-2-10 with 3.3V for the same period Hope that helps |
|
|
May 19 2005, 04:30 AM
Return to original view | Post
#24
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
QUOTE(winc87 @ May 19 2005, 02:59 AM) Oh ya dinster , maybe you should list out the CPU clock speed as it affects the memory score in sandra2005 for AMD64. hurm.... thanks for the idea.... will edit the template......  btw winc87, u forgot to post CPU-Z memory screenshot.. as u can see Sandra detected ur timing as 2-2-2-2 that's not correct right ? This post has been edited by dinster: May 19 2005, 04:41 AM |
|
|
May 19 2005, 01:55 PM
Return to original view | Post
#25
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
QUOTE(hippies @ May 19 2005, 01:15 PM) Nope, if i wanna do a 2.5-3-3-6 I need 2.9V. My principles is not exceding 2.8V, i don't want to heat up my mosfet. nice OC hippies....... break 8K mark pls.... This post has been edited by dinster: May 19 2005, 01:56 PM |
|
|
May 19 2005, 04:14 PM
Return to original view | Post
#26
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
antonio..
did u mix up the OCZ VX Value with other RAM ? bcoz from the pic.. it looks like 3 pieces of RAM.. |
|
|
|
|
|
May 20 2005, 12:43 AM
Return to original view | Post
#27
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
QUOTE(xcrue @ May 19 2005, 11:27 PM) my nf7-s can go 2.9v max only?Hey guys,how to increase it?? http://s6.invisionfree.com/underclock/index.php?showtopic=57my new sandra n cpuz screenie at 2-2-2-11 @3330 mhz here goes VDIMM mod for u.... |
|
|
May 20 2005, 03:31 AM
Return to original view | Post
#28
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
QUOTE(xcrue @ May 20 2005, 01:05 AM) dun understand how to solder the mobo,ahah of course.. temp is proportional to voltage applied..do u know how?plz teach will the tempreture of the rams increase? same principle in CPU overclocking.. hurm..... looks like u've to pay somebody else to solder it for u... |
|
|
May 22 2005, 03:20 AM
Return to original view | Post
#29
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
QUOTE(zt_lee @ May 22 2005, 01:40 AM) RAM = 2x512mb corsair xms rev1.4 errrr.. Corsair XMS Rev 1.4 TCCD ??chipset =tccd Vdimm applied = 2.8v 1T OR 2T = 1T system = p42.4c CPU speed = 12*285fsb never heard of that before.. ( Rev 1.4 ) |
|
|
May 24 2005, 02:32 AM
Return to original view | Post
#30
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
QUOTE(hippies @ May 22 2005, 01:45 AM) The newer batch of OCZ PLAT. rev2 sux! No matter how hard I try i cannot get it to match my older batch which runs 320HTT @ 2.5-3-3-6 @ 2.8V that's bcoz the new batch is carrying Samsung TCC5.. goodbye TCCD  for those who's using TCCD now, u're just damn lucky.. taken from XS forum.. statement from OCZ representative.. Originally Posted by AndyOCZ OK, guys, time out! The TCC5 and TCCD are on the exact same die. We have openly discussed announced here on XS and elsewhere that we may use TCC5. We also do not gurantee what chips we use AND I have seen NO complaints over the way any of the TCCX chips are overclocking. We still bin all the chips to the same specs. As far as the heatspreaders there is no meaning to them at all. The first TCCD always came in the embossed ones and older TCCD also came with the raised logo spreaders. I have both here, produced at the same time. NOW, different weeks chips have different properties, just like CPU's. Some of the early TCCD liked more volts. The best of the new TCCD chips do just fine for clocking and do it with less volts SOMETIMES. Again, they don't make all chips in one day, they spread production out over months. TCCD and TCC5 are all getting a bit scarce as the push is on big time for DDR2 now, since AMD is going with that next year. We use what is available to keep you guys suppplied. Another point is that the PC3200 EL Platinum must run 2-2-2 timings at 200. Not all the TCCD or TCC5 will do this. Again, we have to have chips for the memory that will do spec, or we can't make any. If your memory does not meet spec, we will glady replace it. I see a comment about prices. Yes prices are good. If you want a guranteed 600mhz DDR, spend a bit more and get the PC4800, that's why we make it. As far as RMA's I have no idea. No one has complained an no complaints have been heard. You can always email support through out website. Thanks This post has been edited by dinster: May 24 2005, 08:56 AM |
|
|
May 24 2005, 02:34 AM
Return to original view | Post
#31
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
QUOTE(gsan @ May 22 2005, 08:07 PM) soulfly, err.. how come your 250 @ 10-3-3-2.5, 1T is better than mine 253 @ 2-2-2-11, 1T ? did u realise that soulfly's system is Sempron socket 754 ? @ irenic show off your Gskill TCCD "LF" la weh.. dont let it collecting dust okay  This post has been edited by dinster: May 24 2005, 08:56 AM |
|
|
May 24 2005, 08:11 PM
Return to original view | Post
#32
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
RAM = 2x256mb Kingston HyperX PC3200
chipset = Winbond BH5 (1st generation) Vdimm applied = 3.0 V 1T OR 2T = 2T system = Athlon XP-M CPU speed = 2578 MHZ Attached thumbnail(s) 
|
|
|
May 24 2005, 08:12 PM
Return to original view | Post
#33
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
QUOTE(prancingHORSE @ May 24 2005, 06:35 PM) 6498/6508, this was my old setup. =) running 3.2V. could u pls use the template given ? also perhaps u have a better screenshot ? sooooooooo small....... |
|
|
|
|
|
May 24 2005, 08:37 PM
Return to original view | Post
#34
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
for OCZ users..
here's a list of OCZ Support Forum / Thread http://www.bleedinedge.com/forum/forumdisplay.php?f=45 http://www.xtremesystems.org/forums/forumdisplay.php?f=138 http://forums.anandtech.com/messageview.as...9&enterthread=y http://www.short-media.com/forum/forumdisplay.php?f=64 when will they send their support team to this forum ??  |
|
|
May 27 2005, 07:20 AM
Return to original view | Post
#35
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
nobody here feels like want to break 8k marks on NF4 system ?
|
|
|
May 29 2005, 09:41 PM
Return to original view | Post
#36
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
QUOTE(babyelf @ May 28 2005, 03:21 PM) almost 8k already.. i change back to 310 bios later tonight push it to 270mhz and u'll break 8k marks RAM = 2x512mb Corsair 3200LLv1.1 BH-5 chipset = Winbond BH5 (1st generation) Vdimm applied = 3.5 1T OR 2T = 1T system = A64 3500+ CPU speed = 265x11= 2922mhz |
|
|
May 31 2005, 01:12 AM
Return to original view | Post
#37
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
QUOTE(jslut @ May 28 2005, 06:55 AM) ok another update bros Vdimm applied = 32.8 <---------------  RAM = 2x256mb Gskill LE PC4400 2.5-3-3-10 chipset = TTCD Vdimm applied = 32.8 1T OR 2T = 1T system = A64 Sempron 3100+ CPU speed = 2475mhz even if it is 3.28.. i think it's wrong as well.. 3.28 V for TCCD...  This post has been edited by dinster: May 31 2005, 01:13 AM |
|
|
May 31 2005, 01:19 AM
Return to original view | Post
#38
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
QUOTE(soulfly @ May 30 2005, 12:40 PM) erm... just want to give opinion nice idea.. isn't that it's kinda unfair S-754 Athlon64 to be compared to S-939 Athlon64, coz the differences in performance of single channel and dual channel Athlon64 is quite obvious i think the category for amd should be divided to Socket A (Athlon/Athlon XP/Duron/Sempron) Socket 754 (Athlon64/Sempron) Socket 939/940 (Athlon64/Athlon64 FX)  |
|
|
May 31 2005, 01:20 AM
Return to original view | Post
#39
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
QUOTE(antonio_zth @ May 30 2005, 11:28 AM) din...unofficially i got 69++.....still waiting patiently to get the rams burns...not burn out..burn in... no Sandra screenie + CPU-Z screenie + template = not verified.. |
|
|
Jun 2 2005, 12:28 PM
Return to original view | Post
#40
|
|
Senior Member
1,115 posts Joined: Jan 2003 From: Klang / Shah Alam
|
attention Samsung TCCD / TCC5 + DFI NF4 users......
some guide for u..... http://www.bleedinedge.com/forum/showpost....70&postcount=11 This post has been edited by dinster: Jun 2 2005, 12:29 PM |
| Change to: |  0.0275sec
 0.41
 7 queries
 GZIP Disabled
Time is now: 27th November 2025 - 09:05 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.