the voltage is crazy reading....
i set 1.45vcore but all software detected 0.1v plus,no know why.

all teh rest voltage i forgotten already,now i undervolt my processor and run @ 3.0ghz only

bro Ace,what board are u use eh?
arr..wonder why i cant load those picture..~

guys,i need some advice here.

can all 45nm user no matter duallie or quaddie report ur temperature here?
so taht we can have a reference that 45nm in working in what temperature in what speed.

deal?

currently i'm fine tuning my rig,so have to slow slow tune cause i have exam this few days,but still tangan itch go do some fine tune too.

anyway,will update u asap,no worry about this.

btw,is Q9450 @ 3.2GHz with 1.11vcore consider good?

Wah so high ar the voltage for 45nm

How much is the load temp with your wc at that voltage ?

@icemocha

I think you can improve the Delta using a better pump.

My idle temp is 50c and my load (both proc and gpu) temp is 60c. Using Storm V1 + DD Maze4 GPU  + Laing D4 + HWlabs BIX2.

actually its depends, my wc delta for my GPU much more lower thn my CPU, GPU 3c delta, CPU 10c-13c for prime95. A higher delta for intel burn-in test, around 15-17c for intel burn in test maximum stress.... using 2x mcp650, 2x mcr220qp, dtek fuzion v1 with 4.4mm nozzle and aquaxtreme mp-01... mayb its proc's IHS or hotter proc gua...

my proc is Q9550 OC'ed to 3.622ghz with 1.34vcore...

bad temps 

1.3vtt 1.31vcore in windows, 1.275vcore in bios.

Wow, one hell of a rig.. 24gb ram ?

Just started playing with my proc, this is wat i got temp difference give me a headache, even the speed also differ from cpu-z n orthos.

Your FSB lower ma >.<

If I OC any higher , e.g. vcore 1.2 above, my temp would generally pump up to as high as 80C. Max record I got was 84C and that was around vcore 1.3 (@3.6ghz). Not dare to prime it for hours cos the temp really scary. Will wait till I get my hands on a better cooling device.

One question here for those who used MSI p45 platinum. Did you guys mount TRUE (thermalright ultra extreme) on it successfullt ? can it fit onto the mobo ? thanks

5G result???  

I'm still testing my E8500 at 4G, lowering the vcore...currently running Prime95 at 1.275vbios/1.264vdrop...no vdroop on my mobo...quite surprise.
already passed 7hrs when i was leaving to work this morning at around 7am...hopefully no prob.
later on will only see how hi can it go...5G is a no-no on air i guess...